diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index f43a21cfc9..a3453b40ea 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -42,15 +42,15 @@ #define EEPROM_OFFSET 100 /** - * V44 EEPROM Layout: + * V45 EEPROM Layout: * * 100 Version (char x4) * 104 EEPROM CRC16 (uint16_t) * * 106 E_STEPPERS (uint8_t) - * 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x8) - * 123 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x8) - * 139 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8) + * 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x8) + 64 + * 123 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x8) + 64 + * 139 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8) + 64 * 155 M204 P planner.acceleration (float) * 159 M204 R planner.retract_acceleration (float) * 163 M204 T planner.travel_acceleration (float) @@ -62,7 +62,7 @@ * 187 M205 Z planner.max_jerk[Z_AXIS] (float) * 191 M205 E planner.max_jerk[E_AXIS] (float) * 195 M206 XYZ home_offset (float x3) - * 207 M218 XYZ hotend_offset (float x3 per additional hotend) + * 207 M218 XYZ hotend_offset (float x3 per additional hotend) +16 * * Global Leveling: 4 bytes * 219 z_fade_height (float) @@ -88,86 +88,86 @@ * 316 z_values[][] (float x9, up to float x256) +988 * * AUTO_BED_LEVELING_UBL: 2 bytes - * 324 G29 A planner.leveling_active (bool) - * 325 G29 S ubl.storage_slot (int8_t) + * 352 G29 A planner.leveling_active (bool) + * 353 G29 S ubl.storage_slot (int8_t) * * DELTA: 44 bytes - * 352 M666 H delta_height (float) - * 364 M666 XYZ delta_endstop_adj (float x3) - * 368 M665 R delta_radius (float) - * 372 M665 L delta_diagonal_rod (float) - * 376 M665 S delta_segments_per_second (float) - * 380 M665 B delta_calibration_radius (float) - * 384 M665 X delta_tower_angle_trim[A] (float) - * 388 M665 Y delta_tower_angle_trim[B] (float) - * 392 M665 Z delta_tower_angle_trim[C] (float) + * 354 M666 H delta_height (float) + * 358 M666 XYZ delta_endstop_adj (float x3) + * 370 M665 R delta_radius (float) + * 374 M665 L delta_diagonal_rod (float) + * 378 M665 S delta_segments_per_second (float) + * 382 M665 B delta_calibration_radius (float) + * 386 M665 X delta_tower_angle_trim[A] (float) + * 390 M665 Y delta_tower_angle_trim[B] (float) + * 394 M665 Z delta_tower_angle_trim[C] (float) * * [XYZ]_DUAL_ENDSTOPS: 12 bytes - * 352 M666 X x_endstop_adj (float) - * 356 M666 Y y_endstop_adj (float) - * 360 M666 Z z_endstop_adj (float) + * 354 M666 X x_endstop_adj (float) + * 358 M666 Y y_endstop_adj (float) + * 362 M666 Z z_endstop_adj (float) * * ULTIPANEL: 6 bytes - * 396 M145 S0 H lcd_preheat_hotend_temp (int x2) - * 400 M145 S0 B lcd_preheat_bed_temp (int x2) - * 404 M145 S0 F lcd_preheat_fan_speed (int x2) + * 398 M145 S0 H lcd_preheat_hotend_temp (int x2) + * 402 M145 S0 B lcd_preheat_bed_temp (int x2) + * 406 M145 S0 F lcd_preheat_fan_speed (int x2) * * PIDTEMP: 82 bytes - * 408 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) - * 428 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4) - * 440 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4) - * 456 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4) - * 472 M301 E4 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4) - * 488 M301 L lpq_len (int) + * 410 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) + * 426 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4) + * 442 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4) + * 458 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4) + * 474 M301 E4 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4) + * 490 M301 L lpq_len (int) * * PIDTEMPBED: 12 bytes - * 490 M304 PID thermalManager.bedKp, .bedKi, .bedKd (float x3) + * 492 M304 PID bedKp, .bedKi, .bedKd (float x3) * * DOGLCD: 2 bytes - * 502 M250 C lcd_contrast (uint16_t) + * 504 M250 C lcd_contrast (uint16_t) * * FWRETRACT: 33 bytes - * 504 M209 S autoretract_enabled (bool) - * 505 M207 S retract_length (float) - * 509 M207 F retract_feedrate_mm_s (float) - * 513 M207 Z retract_zlift (float) - * 517 M208 S retract_recover_length (float) - * 521 M208 F retract_recover_feedrate_mm_s (float) - * 525 M207 W swap_retract_length (float) - * 529 M208 W swap_retract_recover_length (float) - * 533 M208 R swap_retract_recover_feedrate_mm_s (float) + * 506 M209 S autoretract_enabled (bool) + * 507 M207 S retract_length (float) + * 511 M207 F retract_feedrate_mm_s (float) + * 515 M207 Z retract_zlift (float) + * 519 M208 S retract_recover_length (float) + * 523 M208 F retract_recover_feedrate_mm_s (float) + * 527 M207 W swap_retract_length (float) + * 531 M208 W swap_retract_recover_length (float) + * 535 M208 R swap_retract_recover_feedrate_mm_s (float) * * Volumetric Extrusion: 21 bytes - * 537 M200 D parser.volumetric_enabled (bool) - * 538 M200 T D planner.filament_size (float x5) (T0..3) + * 539 M200 D parser.volumetric_enabled (bool) + * 540 M200 T D planner.filament_size (float x5) (T0..3) * * HAVE_TMC2130: 22 bytes - * 558 M906 X Stepper X current (uint16_t) - * 560 M906 Y Stepper Y current (uint16_t) - * 562 M906 Z Stepper Z current (uint16_t) - * 564 M906 X2 Stepper X2 current (uint16_t) - * 566 M906 Y2 Stepper Y2 current (uint16_t) - * 568 M906 Z2 Stepper Z2 current (uint16_t) - * 570 M906 E0 Stepper E0 current (uint16_t) - * 572 M906 E1 Stepper E1 current (uint16_t) - * 574 M906 E2 Stepper E2 current (uint16_t) - * 576 M906 E3 Stepper E3 current (uint16_t) - * 578 M906 E4 Stepper E4 current (uint16_t) + * 560 M906 X Stepper X current (uint16_t) + * 562 M906 Y Stepper Y current (uint16_t) + * 564 M906 Z Stepper Z current (uint16_t) + * 566 M906 X2 Stepper X2 current (uint16_t) + * 568 M906 Y2 Stepper Y2 current (uint16_t) + * 570 M906 Z2 Stepper Z2 current (uint16_t) + * 572 M906 E0 Stepper E0 current (uint16_t) + * 574 M906 E1 Stepper E1 current (uint16_t) + * 576 M906 E2 Stepper E2 current (uint16_t) + * 578 M906 E3 Stepper E3 current (uint16_t) + * 580 M906 E4 Stepper E4 current (uint16_t) * * LIN_ADVANCE: 8 bytes - * 580 M900 K extruder_advance_k (float) - * 584 M900 WHD advance_ed_ratio (float) + * 582 M900 K extruder_advance_k (float) + * 586 M900 WHD advance_ed_ratio (float) * * HAS_MOTOR_CURRENT_PWM: - * 588 M907 X Stepper XY current (uint32_t) - * 592 M907 Z Stepper Z current (uint32_t) - * 596 M907 E Stepper E current (uint32_t) + * 590 M907 X Stepper XY current (uint32_t) + * 594 M907 Z Stepper Z current (uint32_t) + * 598 M907 E Stepper E current (uint32_t) * * CNC_COORDINATE_SYSTEMS 108 bytes - * 600 G54-G59.3 coordinate_system (float x 27) + * 602 G54-G59.3 coordinate_system (float x 27) * - * 708 Minimum end-point - * 2025 (704 + 36 + 9 + 288 + 988) Maximum end-point + * 710 Minimum end-point + * 2239 (710 + 208 + 36 + 9 + 288 + 988) Maximum end-point * * ======================================================================== * meshes_begin (between max and min end-point, directly above) @@ -449,7 +449,7 @@ void MarlinSettings::postprocess() { EEPROM_WRITE(storage_slot); #endif // AUTO_BED_LEVELING_UBL - // 10 floats for DELTA / [XYZ]_DUAL_ENDSTOPS + // 11 floats for DELTA / [XYZ]_DUAL_ENDSTOPS #if ENABLED(DELTA) EEPROM_WRITE(delta_height); // 1 float EEPROM_WRITE(delta_endstop_adj); // 3 floats @@ -480,11 +480,11 @@ void MarlinSettings::postprocess() { EEPROM_WRITE(dummy); #endif - for (uint8_t q = 7; q--;) EEPROM_WRITE(dummy); + for (uint8_t q = 8; q--;) EEPROM_WRITE(dummy); #else dummy = 0.0f; - for (uint8_t q = 10; q--;) EEPROM_WRITE(dummy); + for (uint8_t q = 11; q--;) EEPROM_WRITE(dummy); #endif #if DISABLED(ULTIPANEL)