3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-29 23:07:42 +00:00
Code Issues Releases Wiki Activity

[1.1.x] Enable PIDTEMPBED in Anet A8 example config (#12654)

Browse Source
This commit is contained in:
Ondřej Nový 2018-12-18 20:34:25 +01:00 committed by Scott Lahteine
parent eddb785bee
commit e99a1fb46f
1 changed files with 11 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Marlin/example_configurations/Anet/A8/Configuration.h
View File

@ -413,9 +413,9 @@
* heater. If your configuration is significantly different than this and you don't understand * heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/ */
//#define PIDTEMPBED #define PIDTEMPBED
#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
/** /**
* Max Bed Power * Max Bed Power
@ -431,9 +431,9 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
@ -441,6 +441,12 @@
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// ANET A8
// original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5):
#define DEFAULT_bedKp 295.00
#define DEFAULT_bedKi 35.65
#define DEFAULT_bedKd 610.21
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED