3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 12:04:19 +00:00
Code Issues Releases Wiki Activity

re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle.

Browse Source 
the M301 now returns the current PID settings of the machine.
M105 returns heating pwm duty cylce as "@:"
This commit is contained in:
Bernhard Kubicek 2011-11-12 20:37:28 +01:00
parent 36958ee305
commit e9adfa27b5
2 changed files with 30 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

52
Marlin/Marlin.pde
View File

@ -647,33 +647,24 @@ inline void process_commands()
break;
case 105: // M105
//SERIAL_ECHOLN(freeMemory());
#if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595)
tt = degHotend0();
#endif
#if TEMP_1_PIN > -1
bt = degBed();
#endif
#if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595)
SERIAL_PROTOCOLPGM("ok T:");
SERIAL_PROTOCOL(tt);
SERIAL_PROTOCOL( degHotend0());
#if TEMP_1_PIN > -1
#ifdef PIDTEMP
SERIAL_PROTOCOL(" B:");
#if TEMP_1_PIN > -1
SERIAL_PROTOCOLLN(bt);
#else
SERIAL_PROTOCOLLN(HeaterPower);
#endif
#else //not PIDTEMP
SERIAL_PROTOCOLLN("");
#endif //PIDTEMP
#else
SERIAL_PROTOCOLLN("");
#endif //TEMP_1_PIN
#else
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("No thermistors - no temp");
SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL(degBed());
#endif //TEMP_1_PIN
#else
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("No thermistors - no temp");
#endif
#ifdef PIDTEMP
SERIAL_PROTOCOLPGM(" @:");
SERIAL_PROTOCOL( HeaterPower);
#endif
SERIAL_PROTOCOLLN("");
return;
break;
case 109:
@ -901,6 +892,21 @@ inline void process_commands()
if(code_seen('P')) Kp = code_value();
if(code_seen('I')) Ki = code_value()*PID_dT;
if(code_seen('D')) Kd = code_value()/PID_dT;
#ifdef PID_ADD_EXTRUSION_RATE
if(code_seen('C')) Kc = code_value();
#endif
SERIAL_PROTOCOL("ok p:");
SERIAL_PROTOCOL(Kp);
SERIAL_PROTOCOL(" i:");
SERIAL_PROTOCOL(Ki/PID_dT);
SERIAL_PROTOCOL(" d:");
SERIAL_PROTOCOL(Kd*PID_dT);
#ifdef PID_ADD_EXTRUSION_RATE
SERIAL_PROTOCOL(" c:");
SERIAL_PROTOCOL(Kc*PID_dT);
#endif
SERIAL_PROTOCOLLN("");
break;
#endif //PIDTEMP
case 500: // Store settings in EEPROM

1
Marlin/temperature.cpp
View File

@ -156,6 +156,7 @@ void manage_heater()
pTerm+=Kc*current_block->speed_e; //additional heating if extrusion speed is high
#endif
pid_output = constrain(pTerm + iTerm - dTerm, 0, PID_MAX);
HeaterPower=pid_output;
}
#endif //PID_OPENLOOP
#ifdef PID_DEBUG