3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity

Improved MANUAL_[XYZ]_HOME_POS

Browse Source 
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
This commit is contained in:
Scott Lahteine 2016-07-28 19:51:48 -07:00
parent 1734de4d4e
commit ea5ac94804
24 changed files with 174 additions and 248 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
Marlin/Conditionals_post.h
View File

@ -94,22 +94,29 @@
#endif #endif
/** /**
* AUTOSET LOCATIONS OF LIMIT SWITCHES * Set the home position based on settings or manual overrides
*/ */
#if ENABLED(MANUAL_HOME_POSITIONS) // Use manual limit switch locations #ifdef MANUAL_X_HOME_POS
#define X_HOME_POS MANUAL_X_HOME_POS #define X_HOME_POS MANUAL_X_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS #elif ENABLED(BED_CENTER_AT_0_0)
#define Z_HOME_POS MANUAL_Z_HOME_POS #define X_HOME_POS ((X_MAX_LENGTH) * (X_HOME_DIR) * 0.5)
#else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits
#if ENABLED(BED_CENTER_AT_0_0)
#define X_HOME_POS (X_MAX_LENGTH) * (X_HOME_DIR) * 0.5
#define Y_HOME_POS (Y_MAX_LENGTH) * (Y_HOME_DIR) * 0.5
#else #else
#define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS) #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#endif
#ifdef MANUAL_Y_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#elif ENABLED(BED_CENTER_AT_0_0)
#define Y_HOME_POS ((Y_MAX_LENGTH) * (Y_HOME_DIR) * 0.5)
#else
#define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS) #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#endif #endif
#ifdef MANUAL_Z_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS
#else
#define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS) #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
#endif //!MANUAL_HOME_POSITIONS #endif
/** /**
* The BLTouch Probe emulates a servo probe * The BLTouch Probe emulates a servo probe

18
Marlin/Configuration.h
View File

@ -716,18 +716,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

2
Marlin/SanityCheck.h
View File

@ -728,4 +728,6 @@
#error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead." #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
#elif defined(HOMING_FEEDRATE) #elif defined(HOMING_FEEDRATE)
#error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead." #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
#elif defined(MANUAL_HOME_POSITIONS)
#error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
#endif #endif

18
Marlin/example_configurations/Cartesio/Configuration.h
View File

@ -717,18 +717,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/Felix/Configuration.h
View File

@ -699,18 +699,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/Felix/DUAL/Configuration.h
View File

@ -697,18 +697,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -709,18 +709,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -710,18 +710,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/K8200/Configuration.h
View File

@ -734,18 +734,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/K8400/Configuration.h
View File

@ -717,18 +717,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View File

@ -717,18 +717,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -717,18 +717,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/RigidBot/Configuration.h
View File

@ -714,18 +714,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -725,18 +725,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) #define MANUAL_X_HOME_POS -22
// For SCARA: Offset between HomingPosition and Bed X=0 / Y=0 #define MANUAL_Y_HOME_POS -52
#define MANUAL_X_HOME_POS -22. #define MANUAL_Z_HOME_POS 0.1 // Distance between the nozzle to printbed after homing
#define MANUAL_Y_HOME_POS -52.
#define MANUAL_Z_HOME_POS 0.1 // Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/TAZ4/Configuration.h
View File

@ -738,18 +738,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -708,18 +708,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -717,18 +717,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

17
Marlin/example_configurations/delta/biv2.5/Configuration.h
View File

@ -810,17 +810,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used #define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 #define MANUAL_Z_HOME_POS 405 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 405 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

17
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -804,17 +804,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used #define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 #define MANUAL_Z_HOME_POS 250 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

17
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -807,17 +807,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used #define BED_CENTER_AT_0_0
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 #define MANUAL_Z_HOME_POS 250 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

17
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -801,17 +801,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used #define BED_CENTER_AT_0_0
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 #define MANUAL_Z_HOME_POS 277 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 277 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

17
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -802,17 +802,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used #define BED_CENTER_AT_0_0
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 #define MANUAL_Z_HOME_POS 381.4 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 381.4 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/makibox/Configuration.h
View File

@ -720,18 +720,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //

18
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -706,18 +706,14 @@
// @section homing // @section homing
// The position of the homing switches // The center of the bed is at (X=0, Y=0)
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
// Manual homing switch locations: // Manually set the home position. Leave these undefined for automatic settings.
// For deltabots this means top and center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#if ENABLED(MANUAL_HOME_POSITIONS) //#define MANUAL_X_HOME_POS 0
#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
#endif
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //