From f33ec4aacfff4af61879d8cd2de66e03706e1b84 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Mon, 15 Feb 2021 04:10:17 -0600
Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Tweak=20G26=20Q=20description?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 Marlin/src/gcode/bedlevel/G26.cpp | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp
index 728771d5809..941861f0447 100644
--- a/Marlin/src/gcode/bedlevel/G26.cpp
+++ b/Marlin/src/gcode/bedlevel/G26.cpp
@@ -71,8 +71,8 @@
  *                    pliers while holding the LCD Click wheel in a depressed state. If you do not have
  *                    an LCD, you must specify a value if you use P.
  *
- *   Q #  Multiplier  Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and
- *                    un-retraction is at 1.2mm   These numbers will be scaled by the specified amount
+ *   Q #  Multiplier  Retraction Multiplier. (Normally not needed.) During G26 retraction will use the length
+ *                    specified by this parameter (1mm by default). Recover will be 1.2x the retract distance.
  *
  *   R #  Repeat      Prints the number of patterns given as a parameter, starting at the current location.
  *                    If a parameter isn't given, every point will be printed unless G26 is interrupted.