From f375d9bd7b9d8169c513a3b38bb839b909ab18e5 Mon Sep 17 00:00:00 2001 From: makerbase <4164049@qq.com> Date: Wed, 2 Sep 2020 07:20:16 +0800 Subject: [PATCH] MKS SGEN L V2 (#18822) --- Marlin/src/core/boards.h | 1 + Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h | 357 +++++++++++++++++++ Marlin/src/pins/pins.h | 2 + 3 files changed, 360 insertions(+) create mode 100644 Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index c880b3d3256..e280d955b80 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -235,6 +235,7 @@ #define BOARD_SMOOTHIEBOARD 2506 // Smoothieboard #define BOARD_TH3D_EZBOARD 2507 // TH3D EZBoard v1.0 #define BOARD_BTT_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed) +#define BOARD_MKS_SGEN_L_V2 2509 // MKS SGEN_L V2 (Power outputs: Hotend0, Hotend1, Bed, Fan) // // SAM3X8E ARM Cortex M3 diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h new file mode 100644 index 00000000000..d112cc5d508 --- /dev/null +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -0,0 +1,357 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS SGen pin assignments + */ + +#ifndef MCU_LPC1769 + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "MKS SGEN_L V2" +#define BOARD_WEBSITE_URL "github.com/makerbase-mks" + +// +// EEPROM, MKS SGEN_L V2.0 hardware has 4K EEPROM on the board +// +#if NO_EEPROM_SELECTED + //#define SDCARD_EEPROM_EMULATION + //#define I2C_EEPROM // AT24C32 + #define FLASH_EEPROM_EMULATION + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Servos +// +#define SERVO0_PIN P1_23 // SERVO P1.23 +#define SERVO1_PIN P2_00 // SERVO P2.0 + +// +// Trinamic Stallguard pins, can connect or disconnect by jumpers cap on the board +// +#define X_DIAG_PIN P1_29 // X- +#define Y_DIAG_PIN P1_27 // Y- +#define Z_DIAG_PIN P1_25 // Z- +#define E0_DIAG_PIN P1_28 // X+ +#define E1_DIAG_PIN P1_26 // Y+ + +// +// Limit Switches +// +#if X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN + #if X_HOME_DIR < 0 + #define X_MAX_PIN P1_28 // X+ + #else + #define X_MIN_PIN P1_28 // X+ + #endif +#else + #define X_MIN_PIN P1_29 // X- + #define X_MAX_PIN P1_28 // X+ +#endif + +#if Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN + #if Y_HOME_DIR < 0 + #define Y_MAX_PIN P1_26 // Y+ + #else + #define Y_MIN_PIN P1_26 // Y+ + #endif +#else + #define Y_MIN_PIN P1_27 // Y- + #define Y_MAX_PIN P1_26 // Y+ +#endif + +#if Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN + #if Z_HOME_DIR < 0 + #define Z_MAX_PIN P1_24 // Z+ + #else + #define Z_MIN_PIN P1_24 // Z+ + #endif +#else + #define Z_MIN_PIN P1_25 // Z- + #define Z_MAX_PIN P1_24 // Z+ +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P1_24 +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_03 +#define X_ENABLE_PIN P2_01 +#ifndef X_CS_PIN + #define X_CS_PIN P1_01 +#endif + +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_08 +#endif + +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_10 +#endif + +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_15 +#endif + +#define E1_STEP_PIN P1_09 +#define E1_DIR_PIN P1_14 +#define E1_ENABLE_PIN P0_10 +#ifndef E1_CS_PIN + #define E1_CS_PIN P1_17 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P1_16 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_05 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_04 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN P1_01 + #define X_SERIAL_RX_PIN P1_01 + #define Y_SERIAL_TX_PIN P1_08 + #define Y_SERIAL_RX_PIN P1_08 + #define Z_SERIAL_TX_PIN P1_10 + #define Z_SERIAL_RX_PIN P1_10 + #define E0_SERIAL_TX_PIN P1_15 + #define E0_SERIAL_RX_PIN P1_15 + #define E1_SERIAL_TX_PIN P1_17 + #define E1_SERIAL_RX_PIN P1_17 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif // HAS_TMC_UART + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1) +#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB) +#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2) +#define TEMP_2_PIN P0_26_A3 // Analog Input A3 (P0.26, No pull up) + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#if HOTENDS == 1 + #ifndef FAN1_PIN + #define FAN1_PIN P2_06 + #endif +#else + #ifndef HEATER_1_PIN + #define HEATER_1_PIN P2_06 + #endif +#endif +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif +#ifndef FAN2_PIN + #define FAN2_PIN P1_04 +#endif + +// +// Misc. Functions +// +#define LED_PIN P1_18 // Used as a status indicator +#define LED2_PIN P1_19 +#define LED3_PIN P1_20 +#define LED4_PIN P1_21 + +/** + * _____ _____ + * (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK) + * (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2) + * (LCD_D4) 0.15 | · ·| 0.17 (LCD_D5) (BTN_EN2) 3.26 | · ·| 0.9 (SD_MOSI) + * (LCD_D6) 1.0 | · · | 1.22 (LCD_D7) (SD_DETECT) 0.27 | · · | RST + * GND | · · | 5V GND | · · | NC + * ----- ----- + * EXP1 EXP2 + */ +#if HAS_SPI_LCD + #define BEEPER_PIN P1_31 + #define BTN_ENC P1_30 + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS P1_00 + + #define BTN_EN1 P0_18 + #define BTN_EN2 P0_15 + + #define LCD_PINS_ENABLE P1_22 + #define LCD_PINS_D4 P0_17 + + #else + + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + + #define LCD_SDSS P0_28 + + #if ENABLED(MKS_12864OLED_SSD1306) + + #define LCD_PINS_DC P0_17 + #define DOGLCD_CS P0_16 + #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 + + #define LCD_PINS_RS P1_00 + #define LCD_PINS_D7 P1_22 + #define KILL_PIN -1 // NC + + #else // !MKS_12864OLED_SSD1306 + + #define LCD_PINS_RS P0_16 + + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + + #if ENABLED(FYSETC_MINI_12864) + + #define DOGLCD_CS P0_18 + #define DOGLCD_A0 P0_16 + #define DOGLCD_SCK P0_07 + #define DOGLCD_MOSI P1_20 + + #define LCD_BACKLIGHT_PIN -1 + + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN P0_17 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN P1_00 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN P1_22 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN P0_17 + #endif + + #else // !FYSETC_MINI_12864 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS P0_17 + #define DOGLCD_A0 P1_00 + #endif + + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 P0_17 + #define LCD_PINS_D6 P1_00 + #define LCD_PINS_D7 P1_22 + #endif + + #endif // !FYSETC_MINI_12864 + + #endif // !MKS_12864OLED_SSD1306 + + #endif // !CR10_STOCKDISPLAY + +#endif // HAS_SPI_LCD + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN P0_27 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #if SD_CONNECTION_IS(ONBOARD) + #define SS_PIN ONBOARD_SD_CS_PIN + #else + #define SS_PIN P0_28 + #endif +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +// +// Other Pins +// +//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PS_ON_PIN P1_23 // SERVO P1.23 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 22f6ea663ce..2dfb2b53b8e 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -410,6 +410,8 @@ #include "lpc1769/pins_TH3D_EZBOARD.h" // LPC1769 env:LPC1769 #elif MB(BTT_SKR_V1_4_TURBO) #include "lpc1769/pins_BTT_SKR_V1_4_TURBO.h" // LPC1769 env:LPC1769 +#elif MB(MKS_SGEN_L_V2) + #include "lpc1769/pins_MKS_SGEN_L_V2.h" // LPC1769 env:LPC1769 // // Due (ATSAM) boards