3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity

Fix VIKI2 hardware SPI compatibility (#9642)

Browse Source
This commit is contained in:
Bob-the-Kuhn 2018-02-16 02:28:42 -06:00 committed by Scott Lahteine
parent 20f8c9b950
commit f508bdded4
1 changed files with 25 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
Marlin/ultralcd_st7565_u8glib_VIKI.h
View File

@ -82,12 +82,16 @@
#define ST7565_DELAY_3 CPU_ST7565_DELAY_3
#endif
#if ENABLED(SHARED_SPI) // Re-ARM requires that the LCD and the SD card share a single SPI
// On Viki2 the LCD and the SD card share a single SPI
#define HARDWARE_SPI ((DOGLCD_SCK == SCK_PIN) && (DOGLCD_MOSI == MOSI_PIN))
#define ST7565_WRITE_BYTE(a) { spiSend((uint8_t)a); U8G_DELAY(); }
#define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {spiSend( *ptr++);} DELAY_10US; }
#if HARDWARE_SPI // using the hardware SPI
#define ST7565_WRITE_BYTE(a) { SPDR = a; while (!TEST(SPSR, SPIF)); U8G_DELAY(); }
#define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {SPDR = *ptr++; while (!TEST(SPSR, SPIF));} DELAY_10US; }
#else // !HARDWARE_SPI
#else
#define ST7565_SND_BIT \
WRITE(ST7565_CLK_PIN, LOW); ST7565_DELAY_1; \
WRITE(ST7565_DAT_PIN, val & 0x80); ST7565_DELAY_2; \
@ -107,8 +111,9 @@
}
#define ST7565_WRITE_BYTE(a) { ST7565_SWSPI_SND_8BIT((uint8_t)a); U8G_DELAY(); }
#define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {ST7565_SWSPI_SND_8BIT( *ptr++);} DELAY_10US; }
#endif
#define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) { ST7565_SWSPI_SND_8BIT(*ptr++); } DELAY_10US; }
#endif // !HARDWARE_SPI
#if defined(DOGM_SPI_DELAY_US) && DOGM_SPI_DELAY_US > 0
#define U8G_DELAY() delayMicroseconds(DOGM_SPI_DELAY_US)
@ -116,27 +121,26 @@
#define U8G_DELAY() u8g_10MicroDelay()
#endif
#define ST7565_CS() { WRITE(ST7565_CS_PIN,1); U8G_DELAY(); }
#define ST7565_NCS() { WRITE(ST7565_CS_PIN,0); }
#define ST7565_A0() { WRITE(ST7565_A0_PIN,1); U8G_DELAY(); }
#define ST7565_NA0() { WRITE(ST7565_A0_PIN,0); }
#define ST7565_CS() { WRITE(ST7565_CS_PIN,1); U8G_DELAY(); }
#define ST7565_NCS() { WRITE(ST7565_CS_PIN,0); }
#define ST7565_A0() { WRITE(ST7565_A0_PIN,1); U8G_DELAY(); }
#define ST7565_NA0() { WRITE(ST7565_A0_PIN,0); }
uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
switch (msg) {
case U8G_DEV_MSG_INIT: {
OUT_WRITE(ST7565_CS_PIN, LOW);
#if ENABLED(SHARED_SPI)
u8g_Delay(250);
spiBegin();
#ifndef SPI_SPEED
#define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
#endif
spiInit(SPI_SPEED);
#else
OUT_WRITE(ST7565_DAT_PIN, LOW);
OUT_WRITE(ST7565_CLK_PIN, LOW);
OUT_WRITE(ST7565_DAT_PIN, LOW);
OUT_WRITE(ST7565_CLK_PIN, LOW);
#if HARDWARE_SPI
OUT_WRITE(SDSS, 1); // must be set to an output first or else will never go into master mode
SPCR = 0x50; // enable SPI in master mode at fast speed
SPSR = 1; // kick it up to 2x speed mode
#endif
OUT_WRITE(ST7565_A0_PIN, LOW);
ST7565_CS(); /* disable chip */