From f66323ecfbe067667234df286e14d43d409bfaea Mon Sep 17 00:00:00 2001 From: Pagliarulo Onofrio <78806035+oponyx@users.noreply.github.com> Date: Sat, 5 Aug 2023 07:03:10 +0200 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Geeetech=20GT2560=20V4.1B=20board?= =?UTF-8?q?=20(#25888)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/core/boards.h | 1 + Marlin/src/pins/mega/pins_GT2560_V3.h | 18 +- Marlin/src/pins/mega/pins_GT2560_V41b.h | 248 ++++++++++++++++++++++++ Marlin/src/pins/pins.h | 2 + 4 files changed, 264 insertions(+), 5 deletions(-) create mode 100644 Marlin/src/pins/mega/pins_GT2560_V41b.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 50a4ebc194..5c4cabd08d 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -179,6 +179,7 @@ #define BOARD_GT2560_V4_A20 1328 // Geeetech GT2560 Rev B for A20(M/T/D) #define BOARD_PROTONEER_CNC_SHIELD_V3 1329 // Mega controller & Protoneer CNC Shield V3.00 #define BOARD_WEEDO_62A 1330 // WEEDO 62A board (TINA2, Monoprice Cadet, etc.) +#define BOARD_GT2560_V41B 1331 // Geeetech GT2560 V4.1B for A10(M/T/D) // // ATmega1281, ATmega2561 diff --git a/Marlin/src/pins/mega/pins_GT2560_V3.h b/Marlin/src/pins/mega/pins_GT2560_V3.h index 0c588e6516..b684214c69 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3.h @@ -95,7 +95,7 @@ #endif // -// Power Recovery +// Power Loss Detection // #define POWER_LOSS_PIN 69 // Pin to detect power loss #define POWER_LOSS_STATE LOW @@ -168,10 +168,18 @@ #define BEEPER_PIN 18 #if ENABLED(YHCB2004) - #define YHCB2004_MOSI_PIN 21 - #define YHCB2004_MISO_PIN 36 - #define YHCB2004_SCK_PIN 5 - #define YHCB2004_SS_PIN SS + #ifndef YHCB2004_MOSI_PIN + #define YHCB2004_MOSI_PIN 21 + #endif + #ifndef YHCB2004_MISO_PIN + #define YHCB2004_MISO_PIN 36 + #endif + #ifndef YHCB2004_SCK_PIN + #define YHCB2004_SCK_PIN 5 + #endif + #ifndef YHCB2004_SS_PIN + #define YHCB2004_SS_PIN SS + #endif #elif HAS_WIRED_LCD #ifndef LCD_PINS_RS #define LCD_PINS_RS 20 diff --git a/Marlin/src/pins/mega/pins_GT2560_V41b.h b/Marlin/src/pins/mega/pins_GT2560_V41b.h new file mode 100644 index 0000000000..03a82ca2f2 --- /dev/null +++ b/Marlin/src/pins/mega/pins_GT2560_V41b.h @@ -0,0 +1,248 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Geeetech GT2560 V4.1b Pins + * Schematic (4.1B): https://green-candy.osdn.jp/external/MarlinFW/board_schematics/Geeetech%20GT2560%20V4.x%20+%20A20/GT2560V4.1BSCHA20T.pdf + * Origin: https://www.geeetech.com/download.html?spm=a2g0s.imconversation.0.0.22d23e5fXlQBWv&download_id=45 + * ATmega2560 +*/ + +#define ALLOW_MEGA1280 +#include "env_validate.h" + +#if HOTENDS > 3 || E_STEPPERS > 3 + #error "GT2560 supports up to 3 hotends / E steppers." +#endif + +#define BOARD_INFO_NAME "GT2560 4.1b" + +/** Limit Switches Connectors + * All have external 10k pull-up resistors + * + * X-Y-Z AXIS MAX LIMIT SWITCHES CONNECTOR (H6) + * --------- + * | 1 4 7 | 5V 32 Z0_MAX GND + * | 2 5 8 | 5V 26 Y_MAX GND + * | 3 6 9 | 5V 22 X_MAX GND + * --------- + * H6 + * + * X AXIS Y AXIS Z1 AXIS Z0 AXIS + * --- --- --- --- + * | 1 | 5V | 1 | 5V | 1 | 5V | 1 | 5V + * | 2 | 24 X_MIN | 2 | 28 Y_MIN | 2 | PE7 Z1_MIN | 2 | 30 Z0_MIN + * | 3 | GND | 3 | GND | 3 | GND | 3 | GND + * --- --- --- --- + * J3 J4 J5 J6 + * +*/ + +//#define Z1_MIN PE7 // Number?? + +#ifndef X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN 24 + #endif + #ifndef X_MAX_PIN + #define X_MAX_PIN 22 + #endif +#endif +#ifndef Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN 28 + #endif + #ifndef Y_MAX_PIN + #define Y_MAX_PIN 26 + #endif +#endif +#ifndef Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN 30 + #endif + #ifndef Z_MAX_PIN + #define Z_MAX_PIN 32 + #endif +#endif + +/** Filament Runout Sensors + * + * Filament 1 Filament 2 Filament 3 + * --- --- --- + * | 1 | 5V | 1 | 5V | 1 | 5V + * | 2 | 66 F_DET0 | 2 | 67 F_DET1 | 2 | 54 F_DET2 + * | 3 | GND | 3 | GND | 3 | GND + * --- --- --- + * J12 J13 J14 + */ + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 66 +#endif +#ifndef FIL_RUNOUT2_PIN + #define FIL_RUNOUT2_PIN 67 +#endif +#ifndef FIL_RUNOUT3_PIN + #define FIL_RUNOUT3_PIN 54 +#endif + +// +// Power Loss Detection +// +#define POWER_LOSS_PIN 69 // Pin to detect power loss +#define POWER_LOSS_STATE LOW + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 39 +#define X_ENABLE_PIN 35 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 25 +#define Z_DIR_PIN 23 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 46 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 12 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +#define E2_STEP_PIN 43 +#define E2_DIR_PIN 45 +#define E2_ENABLE_PIN 41 + +/** Printhead Connector + * ------ + * (PWM8_FAN0) FAN_E0 9 | 1 2 | 9 FAN_E0 24V PWM FROM (PWM8_FAN0) + * (T0) A11 | 3 4 | A11 (T0) E0 Temp + * GND | 5 6 | 30 Z_MIN1 same as (Z0_MIN) + * 5V | 7 8 | 11 (PB5) servo for BL_TOUCH/3D_TOUCH + * (PB4_HE2) HE2 19 | 9 10 | GND + * (PB4_HE2) HE2 19 |11 12 | 19 HE2 24V PWM out for E0 (PB4_HE2) + * V24 |13 14 | V24 + * V24 |15 16 | V24 + * ------ + * H3 + */ + +#define SERVO0_PIN 11 // BLTouch / 3DTouch + +// +// Z Probe PIN6 Header H3 (Print head connector) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN Z_MIN_PIN +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 11 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_2_PIN 8 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 // PWM out to E0 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 2 +#define HEATER_BED_PIN 4 +#define FAN0_PIN 9 +#define FAN1_PIN 8 +#define FAN2_PIN 7 + +// +// Misc. Functions +// +#define SD_DETECT_PIN 38 +#define SDSS 53 +#define LED_PIN 13 // Use 6 (case light) for external LED. 13 is internal (yellow) LED. +#define PS_ON_PIN 12 + +#if NUM_RUNOUT_SENSORS < 3 + #define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 6 // 21 +#endif + +/** LCD Connector + * ------ + * 5V | 1 2 | GND + * (LCM_D7) 36 | 3 4 | 5 (LCM_D6) + * (LCM_D5) 21 | 5 6 | GND + * (LCM_D4) 16 | 7 8 | 17 (LCM_EN) + * (EC_PRESS) 19 | 9 10 | GND + * (RESET) |11 12 | 19 (BEEP) + * ------ + * H2 + */ + +#define LCM_D4 16 // Used as BTN_EN1 for YHCB2004 LCD Module +#define LCM_D5 21 // YHCB2004_SCK_PIN +#define LCM_D6 5 // YHCB2004_SS_PIN +#define LCM_D7 36 // YHCB2004_MOSI_PIN +#define LCM_EN 17 // BTN_EN2 +#define EC_PRESS 19 // BTN_ENC +#define BEEP 18 + +#define BEEPER_PIN BEEP +#define LCM_RS 20 // Pin named and connected to 10k pull-up resistor but unused + +#if ENABLED(YHCB2004) + #define YHCB2004_SS_PIN LCM_D6 + #define YHCB2004_SCK_PIN LCM_D5 + #define YHCB2004_MOSI_PIN LCM_D7 + #define YHCB2004_MISO_PIN LCM_RS // Unused on V4.1b board +#elif HAS_WIRED_LCD + #error "GT2560 V4.1b requires an adapter for common LCDs." + /* Cannot use because V4.1b board has not LCD_PINS_RS wired to display connector + #define LCD_PINS_RS 20 + #define LCD_PINS_EN 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 36 + //*/ +#endif + +#if ENABLED(YHCB2004) + #define BTN_EN1 LCM_D4 + #define BTN_EN2 LCM_EN + #define BTN_ENC EC_PRESS +#elif IS_NEWPANEL + #define BTN_EN1 42 + #define BTN_EN2 40 + #define BTN_ENC 19 +#endif diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 5c90dbc962..652feeb23c 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -348,6 +348,8 @@ #include "mega/pins_PROTONEER_CNC_SHIELD_V3.h" // ATmega2560 env:mega2560 #elif MB(WEEDO_62A) #include "mega/pins_WEEDO_62A.h" // ATmega2560 env:mega2560 +#elif MB(GT2560_V41B) + #include "mega/pins_GT2560_V41b.h" // ATmega2560 env:mega2560 // // ATmega1281, ATmega2561