3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-26 21:36:21 +00:00
Code Issues Releases Wiki Activity

🧑‍💻 IS_ULTRA_LCD => HAS_WIRED_LCD

Browse Source
This commit is contained in:
Scott Lahteine 2022-04-21 07:16:52 -05:00 committed by Scott Lahteine
parent 2f3960904e
commit f6f31434b8
10 changed files with 20 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Marlin/src/inc/Conditionals_LCD.h
View File

@ -41,13 +41,13 @@
*
* DOGLCD : Run a Graphical LCD through U8GLib (with MarlinUI)
* IS_ULTIPANEL : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs
* IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel.
* HAS_WIRED_LCD : Ultra LCD, not necessarily Ultipanel.
* IS_RRD_SC : Common RRD Smart Controller digital interface pins
* IS_RRD_FG_SC : Common RRD Full Graphical Smart Controller digital interface pins
* IS_U8GLIB_ST7920 : Most common DOGM display SPI interface, supporting a "lightweight" display mode.
* U8GLIB_SH1106 : SH1106 OLED with I2C interface via U8GLib
* IS_U8GLIB_SSD1306 : SSD1306 OLED with I2C interface via U8GLib (U8GLIB_SSD1306)
* U8GLIB_SSD1309 : SSD1309 OLED with I2C interface via U8GLib (HAS_U8GLIB_I2C_OLED, IS_ULTRA_LCD, DOGLCD)
* U8GLIB_SSD1309 : SSD1309 OLED with I2C interface via U8GLib (HAS_U8GLIB_I2C_OLED, HAS_WIRED_LCD, DOGLCD)
* IS_U8GLIB_ST7565_64128N : ST7565 128x64 LCD with SPI interface via U8GLib
* IS_U8GLIB_LM6059_AF : LM6059 with Hardware SPI via U8GLib
*/
@ -287,7 +287,7 @@
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#define HAS_U8GLIB_I2C_OLED 1
#define IS_ULTRA_LCD 1
#define HAS_WIRED_LCD 1
#define DOGLCD
#endif
@ -443,7 +443,7 @@
#endif
#if EITHER(IS_ULTIPANEL, ULTRA_LCD)
#define IS_ULTRA_LCD 1
#define HAS_WIRED_LCD 1
#endif
#if EITHER(IS_ULTIPANEL, REPRAPWORLD_KEYPAD)
@ -502,8 +502,7 @@
#endif
#endif
#if IS_ULTRA_LCD
#define HAS_WIRED_LCD 1
#if HAS_WIRED_LCD
#if ENABLED(DOGLCD)
#define HAS_MARLINUI_U8GLIB 1
#elif IS_TFTGLCD_PANEL

4
Marlin/src/pins/mega/pins_MEGATRONICS.h
View File

@ -106,7 +106,7 @@
//
#define BEEPER_PIN 33
#if IS_ULTRA_LCD && IS_NEWPANEL
#if HAS_WIRED_LCD && IS_NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
@ -122,7 +122,7 @@
#define SD_DETECT_PIN -1 // RAMPS doesn't use this
#endif // IS_ULTRA_LCD && IS_NEWPANEL
#endif // HAS_WIRED_LCD && IS_NEWPANEL
//
// M3/M4/M5 - Spindle/Laser Control

2
Marlin/src/pins/pins.h
View File

@ -61,7 +61,7 @@
#endif
#endif
#if !(BOTH(IS_ULTRA_LCD, IS_NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, WYH_L12864, MINIPANEL, REPRAPWORLD_KEYPAD))
#if !(BOTH(HAS_WIRED_LCD, IS_NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, WYH_L12864, MINIPANEL, REPRAPWORLD_KEYPAD))
#define HAS_FREE_AUX2_PINS 1
#endif

6
Marlin/src/pins/ramps/pins_3DRAG.h
View File

@ -111,7 +111,7 @@
#define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 62 // Pullup!
#define SPINDLE_DIR_PIN 48
#elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // Use expansion header if no LCD in use
#elif !BOTH(HAS_WIRED_LCD, IS_NEWPANEL) // Use expansion header if no LCD in use
#define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown!
#define SPINDLE_DIR_PIN 17
#if !NUM_SERVOS // Use servo connector if possible
@ -135,7 +135,7 @@
//
// LCD / Controller
//
#if IS_ULTRA_LCD && IS_NEWPANEL
#if HAS_WIRED_LCD && IS_NEWPANEL
#undef BEEPER_PIN
// TODO: Remap EXP1/2 based on adapter
@ -164,7 +164,7 @@
#define BEEPER_PIN 33
#endif // IS_ULTRA_LCD && IS_NEWPANEL
#endif // HAS_WIRED_LCD && IS_NEWPANEL
#if IS_U8GLIB_ST7920
#define BOARD_ST7920_DELAY_1 0

2
Marlin/src/pins/ramps/pins_FELIX2.h
View File

@ -49,7 +49,7 @@
//
// LCD / Controller
//
#if IS_ULTRA_LCD && IS_NEWPANEL
#if HAS_WIRED_LCD && IS_NEWPANEL
#define SD_DETECT_PIN 6

2
Marlin/src/pins/ramps/pins_K8600.h
View File

@ -69,7 +69,7 @@
//
// LCD / Controller
//
#if IS_ULTRA_LCD && IS_NEWPANEL
#if HAS_WIRED_LCD && IS_NEWPANEL
#undef BEEPER_PIN
#undef LCD_PINS_RS

2
Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
View File

@ -172,7 +172,7 @@
#define LCD_PINS_D6 32
#define LCD_PINS_D7 30
#elif BOTH(BOARD_REV_1_5, IS_ULTRA_LCD)
#elif BOTH(BOARD_REV_1_5, HAS_WIRED_LCD)
#define BEEPER_PIN 18

4
Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
View File

@ -135,7 +135,7 @@
#define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif
#if !HAS_CUTTER && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // try to use IO Header
#if !HAS_CUTTER && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(HAS_WIRED_LCD, IS_NEWPANEL) // try to use IO Header
#define CASE_LIGHT_PIN 4 // Hardware PWM - see if IO Header is available
#endif
@ -268,7 +268,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // try to use IO Header
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(HAS_WIRED_LCD, IS_NEWPANEL) // try to use IO Header
#define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM

4
Marlin/src/pins/teensy2/pins_PRINTRBOARD.h
View File

@ -121,7 +121,7 @@
//
// LCD / Controller
//
#if IS_ULTRA_LCD && IS_NEWPANEL
#if HAS_WIRED_LCD && IS_NEWPANEL
#define LCD_PINS_RS 9 // E1 JP11-11
#define LCD_PINS_ENABLE 8 // E0 JP11-10
@ -163,7 +163,7 @@
#endif
#endif // IS_ULTRA_LCD && IS_NEWPANEL
#endif // HAS_WIRED_LCD && IS_NEWPANEL
#ifndef SDSS
#define SDSS 26 // B6 SDCS

4
Marlin/src/pins/teensy2/pins_TEENSYLU.h
View File

@ -145,7 +145,7 @@
//
// LCD / Controller
//
#if IS_ULTRA_LCD && IS_NEWPANEL
#if HAS_WIRED_LCD && IS_NEWPANEL
#define BEEPER_PIN -1
@ -158,7 +158,7 @@
#define SD_DETECT_PIN -1
#endif // IS_ULTRA_LCD && IS_NEWPANEL
#endif // HAS_WIRED_LCD && IS_NEWPANEL
//
// M3/M4/M5 - Spindle/Laser Control