Merge pull request #8913 from thinkyhead/bf2_multitool_M600

[2.0.x] Multi extruder support for M600 / LCD

Marlin/src/gcode/feature/pause/M600.cpp

@@ -24,14 +24,15 @@
 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 
-#include "../../../feature/pause.h"
-
 #include "../../gcode.h"
+#include "../../../feature/pause.h"
 #include "../../../module/motion.h"
-#include "../../parser.h"
-
 #include "../../../module/printcounter.h"
 
+#if EXTRUDERS > 1
+  #include "../../../module/tool_change.h"
+#endif
+
 /**
  * M600: Pause for filament change
  *
@@ -42,6 +43,7 @@
  *  U[distance] - Retract distance for removal (negative value) (manual reload)
  *  L[distance] - Extrude distance for insertion (positive value) (manual reload)
  *  B[count]    - Number of times to beep, -1 for indefinite (if equipped with a buzzer)
+ *  T[toolhead] - Select extruder for filament change
  *
  *  Default values are used for omitted arguments.
  *
@@ -54,6 +56,18 @@ void GcodeSuite::M600() {
     if (axis_unhomed_error()) home_all_axes();
   #endif
 
+  #if EXTRUDERS > 1
+    // Change toolhead if specified
+    uint8_t active_extruder_before_filament_change = -1;
+    if (parser.seen('T')) {
+      const uint8_t extruder = parser.value_byte();
+      if (active_extruder != extruder) {
+        active_extruder_before_filament_change = active_extruder;
+        tool_change(extruder, 0, true);
+      }
+    }
+  #endif
+
   // Initial retract before move to filament change position
   const float retract = parser.seen('E') ? parser.value_axis_units(E_AXIS) : 0
     #ifdef PAUSE_PARK_RETRACT_LENGTH
@@ -61,16 +75,12 @@ void GcodeSuite::M600() {
     #endif
   ;
 
-  // Lift Z axis
-  if (parser.seenval('Z'))
-    park_point.z = parser.linearval('Z');
-
   // Move XY axes to filament change position or given position
-  if (parser.seenval('X'))
+  if (parser.seenval('X')) park_point.x = parser.linearval('X');
-    park_point.x = parser.linearval('X');
+  if (parser.seenval('Y')) park_point.y = parser.linearval('Y');
 
-  if (parser.seenval('Y'))
+  // Lift Z axis
-    park_point.y = parser.linearval('Y');
+  if (parser.seenval('Z')) park_point.z = parser.linearval('Z');
 
   #if HOTENDS > 1 && DISABLED(DUAL_X_CARRIAGE)
     park_point.x += (active_extruder ? hotend_offset[X_AXIS][active_extruder] : 0);
@@ -106,6 +116,12 @@ void GcodeSuite::M600() {
     resume_print(load_length, ADVANCED_PAUSE_EXTRUDE_LENGTH, beep_count);
   }
 
+  #if EXTRUDERS > 1
+    // Restore toolhead if it was changed
+    if (active_extruder_before_filament_change >= 0)
+      tool_change(active_extruder_before_filament_change, 0, true);
+  #endif
+
   // Resume the print job timer if it was running
   if (job_running) print_job_timer.start();
 }

Marlin/src/lcd/ultralcd.cpp

@@ -295,7 +295,8 @@ uint16_t max_display_update_time = 0;
    */
   #define _MENU_ITEM_PART_1(TYPE, ...) \
     if (_menuLineNr == _thisItemNr) { \
-      if (lcd_clicked && encoderLine == _thisItemNr) {
+      if (encoderLine == _thisItemNr && lcd_clicked) { \
+        lcd_clicked = false
 
   #define _MENU_ITEM_PART_2(TYPE, LABEL, ...) \
         menu_action_ ## TYPE(__VA_ARGS__); \
@@ -499,6 +500,12 @@ uint16_t max_display_update_time = 0;
     float raw_Ki, raw_Kd; // place-holders for Ki and Kd edits
   #endif
 
+  inline bool use_click() {
+    const bool click = lcd_clicked;
+    lcd_clicked = false;
+    return click;
+  }
+
   /**
    * General function to go directly to a screen
    */
@@ -678,7 +685,7 @@ void lcd_status_screen() {
 
   #if ENABLED(ULTIPANEL)
 
-    if (lcd_clicked) {
+    if (use_click()) {
       #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
         previous_lcd_status_ms = millis();  // get status message to show up for a while
       #endif
@@ -861,7 +868,7 @@ void kill_screen(const char* lcd_msg) {
 
     static void progress_bar_test() {
       static int8_t bar_percent = 0;
-      if (lcd_clicked) {
+      if (use_click()) {
         lcd_goto_previous_menu();
         lcd_set_custom_characters(CHARSET_MENU);
         return;
@@ -1088,7 +1095,7 @@ void kill_screen(const char* lcd_msg) {
   #if ENABLED(BABYSTEPPING)
 
     void _lcd_babystep(const AxisEnum axis, const char* msg) {
-      if (lcd_clicked) { return lcd_goto_previous_menu_no_defer(); }
+      if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
       ENCODER_DIRECTION_NORMAL();
       if (encoderPosition) {
         const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
@@ -1111,7 +1118,7 @@ void kill_screen(const char* lcd_msg) {
     #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
 
       void lcd_babystep_zoffset() {
-        if (lcd_clicked) { return lcd_goto_previous_menu_no_defer(); }
+        if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
         defer_return_to_status = true;
         ENCODER_DIRECTION_NORMAL();
         if (encoderPosition) {
@@ -1239,11 +1246,14 @@ void kill_screen(const char* lcd_msg) {
 
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
 
-    void lcd_enqueue_filament_change() {
+    void lcd_enqueue_filament_change(
+      #if EXTRUDERS > 1
+        const uint8_t extruder
+      #endif
+    ) {
 
       #if ENABLED(PREVENT_COLD_EXTRUSION)
-        if (!DEBUGGING(DRYRUN) && !thermalManager.allow_cold_extrude &&
+        if (!DEBUGGING(DRYRUN) && thermalManager.tooColdToExtrude(active_extruder)) {
-            thermalManager.degTargetHotend(active_extruder) < thermalManager.extrude_min_temp) {
           lcd_save_previous_screen();
           lcd_goto_screen(lcd_advanced_pause_toocold_menu);
           return;
@@ -1251,8 +1261,41 @@ void kill_screen(const char* lcd_msg) {
       #endif
 
       lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
+
+      #if EXTRUDERS <= 1
         enqueue_and_echo_commands_P(PSTR("M600 B0"));
+      #else
+        char *command_M600;
+        switch (extruder) {
+          case 0: command_M600 = PSTR("M600 B0 T0"); break;
+          case 1: command_M600 = PSTR("M600 B0 T1"); break;
+          #if EXTRUDERS > 2
+            case 2: command_M600 = PSTR("M600 B0 T2"); break;
+            #if EXTRUDERS > 3
+              case 3: command_M600 = PSTR("M600 B0 T3"); break;
+              #if EXTRUDERS > 4
+                case 4: command_M600 = PSTR("M600 B0 T4"); break;
+              #endif // EXTRUDERS > 4
+            #endif // EXTRUDERS > 3
+          #endif // EXTRUDERS > 2
         }
+        enqueue_and_echo_commands_P(command_M600);
+      #endif // EXTRUDERS > 1
+    }
+
+    #if EXTRUDERS > 1
+      void lcd_enqueue_filament_change_e0() { lcd_enqueue_filament_change(0); }
+      void lcd_enqueue_filament_change_e1() { lcd_enqueue_filament_change(1); }
+      #if EXTRUDERS > 2
+        void lcd_enqueue_filament_change_e2() { lcd_enqueue_filament_change(2); }
+        #if EXTRUDERS > 3
+          void lcd_enqueue_filament_change_e3() { lcd_enqueue_filament_change(3); }
+          #if EXTRUDERS > 4
+            void lcd_enqueue_filament_change_e4() { lcd_enqueue_filament_change(4); }
+          #endif // EXTRUDERS > 4
+        #endif // EXTRUDERS > 3
+      #endif // EXTRUDERS > 2
+    #endif // EXTRUDERS > 1
 
   #endif // ADVANCED_PAUSE_FEATURE
 
@@ -1397,9 +1440,28 @@ void kill_screen(const char* lcd_msg) {
     // Change filament
     //
     #if ENABLED(ADVANCED_PAUSE_FEATURE)
+      #if EXTRUDERS > 1
+        if (!thermalManager.tooColdToExtrude(0))
+          MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E1, lcd_enqueue_filament_change_e0);
+        if (!thermalManager.tooColdToExtrude(1))
+          MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E2, lcd_enqueue_filament_change_e1);
+        #if EXTRUDERS > 2
+          if (!thermalManager.tooColdToExtrude(2))
+            MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E3, lcd_enqueue_filament_change_e2);
+          #if EXTRUDERS > 3
+            if (!thermalManager.tooColdToExtrude(3))
+              MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E4, lcd_enqueue_filament_change_e3);
+            #if EXTRUDERS > 4
+              if (!thermalManager.tooColdToExtrude(4))
+                MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E5, lcd_enqueue_filament_change_e4);
+            #endif // EXTRUDERS > 4
+          #endif // EXTRUDERS > 3
+        #endif // EXTRUDERS > 2
+      #else
         if (!thermalManager.tooColdToExtrude(active_extruder))
           MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
       #endif
+    #endif
 
     END_MENU();
   }
@@ -1793,7 +1855,7 @@ void kill_screen(const char* lcd_msg) {
     void _lcd_level_bed_get_z() {
       ENCODER_DIRECTION_NORMAL();
 
-      if (lcd_clicked) {
+      if (use_click()) {
 
         //
         // Save the current Z position and move
@@ -1873,7 +1935,7 @@ void kill_screen(const char* lcd_msg) {
      */
     void _lcd_level_bed_homing_done() {
       if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_WAITING));
-      if (lcd_clicked) {
+      if (use_click()) {
         manual_probe_index = 0;
         _lcd_level_goto_next_point();
       }
@@ -2364,7 +2426,7 @@ void kill_screen(const char* lcd_msg) {
       if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]))
         return lcd_goto_screen(_lcd_ubl_map_homing);
 
-      if (lcd_clicked) return _lcd_ubl_map_lcd_edit_cmd();
+      if (use_click()) return _lcd_ubl_map_lcd_edit_cmd();
       ENCODER_DIRECTION_NORMAL();
 
       if (encoderPosition) {
@@ -2588,9 +2650,30 @@ void kill_screen(const char* lcd_msg) {
     // Change filament
     //
     #if ENABLED(ADVANCED_PAUSE_FEATURE)
-      if (!thermalManager.tooColdToExtrude(active_extruder) && !IS_SD_FILE_OPEN)
+      if (!IS_SD_FILE_OPEN) {
+        #if EXTRUDERS > 1
+          if (!thermalManager.tooColdToExtrude(0))
+            MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E1, lcd_enqueue_filament_change_e0);
+          if (!thermalManager.tooColdToExtrude(1))
+            MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E2, lcd_enqueue_filament_change_e1);
+          #if EXTRUDERS > 2
+            if (!thermalManager.tooColdToExtrude(2))
+              MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E3, lcd_enqueue_filament_change_e2);
+            #if EXTRUDERS > 3
+              if (!thermalManager.tooColdToExtrude(3))
+                MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E4, lcd_enqueue_filament_change_e3);
+              #if EXTRUDERS > 4
+                if (!thermalManager.tooColdToExtrude(4))
+                  MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E5, lcd_enqueue_filament_change_e4);
+              #endif // EXTRUDERS > 4
+            #endif // EXTRUDERS > 3
+          #endif // EXTRUDERS > 2
+        #else
+          if (!thermalManager.tooColdToExtrude(active_extruder))
             MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
         #endif
+      }
+    #endif // ADVANCED_PAUSE_FEATURE
 
     #if TEMP_SENSOR_0 != 0
 
@@ -2833,7 +2916,7 @@ void kill_screen(const char* lcd_msg) {
    */
 
   void _lcd_move_xyz(const char* name, AxisEnum axis) {
-    if (lcd_clicked) { return lcd_goto_previous_menu(); }
+    if (use_click()) { return lcd_goto_previous_menu(); }
     ENCODER_DIRECTION_NORMAL();
     if (encoderPosition && !processing_manual_move) {
       gcode.refresh_cmd_timeout();
@@ -2917,7 +3000,7 @@ void kill_screen(const char* lcd_msg) {
       int8_t eindex=-1
     #endif
   ) {
-    if (lcd_clicked) { return lcd_goto_previous_menu(); }
+    if (use_click()) { return lcd_goto_previous_menu(); }
     ENCODER_DIRECTION_NORMAL();
     if (encoderPosition) {
       if (!processing_manual_move) {
@@ -2999,7 +3082,7 @@ void kill_screen(const char* lcd_msg) {
     _manual_move_func_ptr = func;
     START_MENU();
     if (LCD_HEIGHT >= 4) {
-      switch(axis) {
+      switch (axis) {
         case X_AXIS:
           STATIC_ITEM(MSG_MOVE_X, true, true); break;
         case Y_AXIS:
@@ -3802,7 +3885,7 @@ void kill_screen(const char* lcd_msg) {
        *
        */
       void lcd_info_stats_menu() {
-        if (lcd_clicked) { return lcd_goto_previous_menu(); }
+        if (use_click()) { return lcd_goto_previous_menu(); }
 
         char buffer[21];
         printStatistics stats = print_job_timer.getStats();
@@ -3836,7 +3919,7 @@ void kill_screen(const char* lcd_msg) {
      *
      */
     void lcd_info_thermistors_menu() {
-      if (lcd_clicked) { return lcd_goto_previous_menu(); }
+      if (use_click()) { return lcd_goto_previous_menu(); }
       START_SCREEN();
       #define THERMISTOR_ID TEMP_SENSOR_0
       #include "thermistornames.h"
@@ -3897,7 +3980,7 @@ void kill_screen(const char* lcd_msg) {
      *
      */
     void lcd_info_board_menu() {
-      if (lcd_clicked) { return lcd_goto_previous_menu(); }
+      if (use_click()) { return lcd_goto_previous_menu(); }
       START_SCREEN();
       STATIC_ITEM(BOARD_NAME, true, true);                           // MyPrinterController
       STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
@@ -3918,7 +4001,7 @@ void kill_screen(const char* lcd_msg) {
      *
      */
     void lcd_info_printer_menu() {
-      if (lcd_clicked) { return lcd_goto_previous_menu(); }
+      if (use_click()) { return lcd_goto_previous_menu(); }
       START_SCREEN();
       STATIC_ITEM(MSG_MARLIN, true, true);                             // Marlin
       STATIC_ITEM(SHORT_BUILD_VERSION, true);                          // x.x.x-Branch
@@ -4317,7 +4400,7 @@ void kill_screen(const char* lcd_msg) {
         if (liveEdit) (*callbackFunc)(); \
         if (lcd_clicked) lcd_goto_previous_menu(); \
       } \
-      return lcd_clicked; \
+      return use_click(); \
     } \
     void menu_edit_ ## _name() { _menu_edit_ ## _name(); } \
     void menu_edit_callback_ ## _name() { if (_menu_edit_ ## _name()) (*callbackFunc)(); } \
@@ -4778,12 +4861,13 @@ void lcd_update() {
 
     if ((lcdDrawUpdate || IS_DRAWING) && (!bbr2 || bbr2 > max_display_update_time)) {
 
+      // Change state of drawing flag between screen updates
       if (!IS_DRAWING) switch (lcdDrawUpdate) {
         case LCDVIEW_CALL_NO_REDRAW:
           lcdDrawUpdate = LCDVIEW_NONE;
           break;
-        case LCDVIEW_CLEAR_CALL_REDRAW: // set by handlers, then altered after (rarely occurs here)
+        case LCDVIEW_CLEAR_CALL_REDRAW:
-        case LCDVIEW_CALL_REDRAW_NEXT:  // set by handlers, then altered after (never occurs here?)
+        case LCDVIEW_CALL_REDRAW_NEXT:
           lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
         case LCDVIEW_REDRAW_NOW:        // set above, or by a handler through LCDVIEW_CALL_REDRAW_NEXT
         case LCDVIEW_NONE:
@@ -4795,7 +4879,7 @@ void lcd_update() {
       #endif
 
       #if ENABLED(ULTIPANEL)
-        #define CURRENTSCREEN() (*currentScreen)(), lcd_clicked = false
+        #define CURRENTSCREEN() (*currentScreen)()
       #else
         #define CURRENTSCREEN() lcd_status_screen()
       #endif
@@ -4820,6 +4904,10 @@ void lcd_update() {
         CURRENTSCREEN();
       #endif
 
+      #if ENABLED(ULTIPANEL)
+        lcd_clicked = false;
+      #endif
+
       // Keeping track of the longest time for an individual LCD update.
       // Used to do screen throttling when the planner starts to fill up.
       NOLESS(max_display_update_time, millis() - ms);
@@ -4835,17 +4923,16 @@ void lcd_update() {
 
     #endif // ULTIPANEL
 
+    // Change state of drawing flag between screen updates
     if (!IS_DRAWING) switch (lcdDrawUpdate) {
       case LCDVIEW_CLEAR_CALL_REDRAW:
-        lcd_implementation_clear();
+        lcd_implementation_clear(); break;
-      case LCDVIEW_CALL_REDRAW_NEXT:
-        lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
-        break;
       case LCDVIEW_REDRAW_NOW:
         lcdDrawUpdate = LCDVIEW_NONE;
-        break;
       case LCDVIEW_NONE:
-        break;
+      case LCDVIEW_CALL_REDRAW_NEXT:
+      case LCDVIEW_CALL_NO_REDRAW:
+      default: break;
     } // switch
 
   } // ELAPSED(ms, next_lcd_update_ms)