diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 045e052de1..42423f8c79 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -238,6 +238,7 @@ #define BOARD_BTT_SKR_V1_1 2012 // BigTreeTech SKR v1.1 #define BOARD_BTT_SKR_V1_3 2013 // BigTreeTech SKR v1.3 #define BOARD_BTT_SKR_V1_4 2014 // BigTreeTech SKR v1.4 +#define BOARD_EMOTRONIC 2015 // eMotion-Tech eMotronic // // LPC1769 ARM Cortex M3 diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index e581bb47c0..5ebce02185 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -389,6 +389,8 @@ #elif ENABLED(ZONESTAR_12864OLED) #define _LCD_CONTRAST_MIN 64 #define _LCD_CONTRAST_INIT 128 +#elif ENABLED(EMOTION_TECH_LCD) + #define _LCD_CONTRAST_INIT 140 #elif IS_TFTGLCD_PANEL #define _LCD_CONTRAST_INIT 250 #endif diff --git a/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h b/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h new file mode 100644 index 0000000000..1cda5db669 --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h @@ -0,0 +1,151 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * eMotion-Tech eMotronic pin assignments + * + * Board pins<->features assignments are based on the + * Micro-Delta Rework printer default connections. + */ + +#include "env_validate.h" + +#define BOARD_INFO_NAME "eMotronic" +#define BOARD_WEBSITE_URL "www.reprap-france.com/article/lemotronic-quesaco" + +// +// Limit Switches +// +#define X_STOP_PIN P1_22 // S0 +#define Y_STOP_PIN P1_23 // S1 +#define Z_STOP_PIN P1_24 // S2 +#define I_STOP_PIN P1_25 // S3 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P0_26 // S4 (opto) +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_02 // M3 +#define X_DIR_PIN P4_28 +#define X_ENABLE_PIN P4_29 + +#define Y_STEP_PIN P2_01 // M2 +#define Y_DIR_PIN P0_22 +#define Y_ENABLE_PIN P0_21 + +#define Z_STEP_PIN P2_00 // M1 +#define Z_DIR_PIN P3_26 +#define Z_ENABLE_PIN P3_25 + +#define E0_STEP_PIN P2_03 // M4 +#define E0_DIR_PIN P0_04 +#define E0_ENABLE_PIN P0_05 // Correct! + +#define E1_STEP_PIN P2_08 // M5 +#define E1_DIR_PIN P0_20 +#define E1_ENABLE_PIN P0_19 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_24_A1 // A1 (TH1) +#define TEMP_1_PIN P0_23_A0 // A0 (TH0) +#define TEMP_BED_PIN P0_25_A2 // A2 (TH2) + +// +// Heaters / Fans +// +#define _H0_PIN P2_04 // (H0: 15A) + +#define HEATER_BED_PIN P2_05 // (H1: 10A shared) +#define HEATER_0_PIN P2_06 // (H2: 10A shared) +#define HEATER_1_PIN P2_07 // (H3: 10A shared) + +#define FAN_PIN P2_11 // (FAN0: 1A) +#define FAN1_PIN P2_13 // (FAN1: 1A) + +// +// Extension ports +// +// warning: pins are backward numbered w.r.t. to the +// schematics, e.g. EXP1_01 / EXP1_02 are X1-10 / X1-9. +#define EXP1_01_PIN P0_28 // SCL0 +#define EXP1_02_PIN P0_27 // SDA0 +#define EXP1_03_PIN P0_16 // SSEL0 +#define EXP1_04_PIN P0_15 // SCK0 +#define EXP1_05_PIN P0_18 // MOSI0 +#define EXP1_06_PIN P0_17 // MISO0 +#define EXP1_07_PIN P1_31 +#define EXP1_08_PIN P1_30 +#define EXP1_09_PIN P0_02 // TX0 +#define EXP1_10_PIN P0_03 // RX0 + +#define EXP2_03_PIN P1_27 +#define EXP2_04_PIN P1_26 +#define EXP2_05_PIN P1_29 +#define EXP2_06_PIN P1_28 +#define EXP2_07_PIN P0_01 // SCL1 +#define EXP2_08_PIN P0_00 // SDA1 +#define EXP2_09_PIN P0_11 +#define EXP2_10_PIN P0_10 + +// +// SD Support +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #define SD_SS_PIN P0_06 +#elif SD_CONNECTION_IS(LCD) + #define SD_SCK_PIN EXP1_04_PIN + #define SD_MISO_PIN EXP1_06_PIN + #define SD_MOSI_PIN EXP1_05_PIN + #define SD_SS_PIN EXP1_03_PIN + #define SD_DETECT_PIN EXP1_07_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +// +// LCD / Controller +// +#if ENABLED(EMOTION_TECH_LCD) + #define BEEPER_PIN EXP2_10_PIN + #define DOGLCD_A0 EXP2_05_PIN + #define DOGLCD_CS EXP2_07_PIN + #define DOGLCD_SCK EXP1_04_PIN + #define DOGLCD_MOSI EXP1_05_PIN + + #define BTN_EN1 EXP2_04_PIN + #define BTN_EN2 EXP2_06_PIN + #define BTN_ENC EXP2_09_PIN +#endif diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index f528d7f260..9c31824b31 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -402,6 +402,8 @@ #include "lpc1768/pins_BTT_SKR_V1_3.h" // LPC1768 env:LPC1768 #elif MB(BTT_SKR_V1_4) #include "lpc1768/pins_BTT_SKR_V1_4.h" // LPC1768 env:LPC1768 +#elif MB(EMOTRONIC) + #include "lpc1768/pins_EMOTRONIC.h" // LPC1768 env:LPC1768 // // LPC1769 ARM Cortex M3