diff --git a/Marlin/language_de.h b/Marlin/language_de.h
index 5aa647b0d71..a765b42fd75 100644
--- a/Marlin/language_de.h
+++ b/Marlin/language_de.h
@@ -221,64 +221,62 @@
 #define MSG_CASE_LIGHT                      _UxGT("Beleuchtung")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Helligkeit")
 
-#if ENABLED(AUTO_BED_LEVELING_UBL)
-  #define MSG_UBL_DOING_G29                 _UxGT("G29 UBL läuft!")
-  #define MSG_UBL_UNHOMED                   _UxGT("Erst XYZ homen")
-  #define MSG_UBL_TOOLS                     _UxGT("UBL Tools")
-  #define MSG_UBL_LEVEL_BED                 _UxGT("Unified Bed Leveling")
-  #define MSG_UBL_MANUAL_MESH               _UxGT("Netz manuell erst.")
-  #define MSG_UBL_BC_INSERT                 _UxGT("Unterlegen & messen")
-  #define MSG_UBL_BC_INSERT2                _UxGT("Messen")
-  #define MSG_UBL_BC_REMOVE                 _UxGT("Entfernen & messen")
-  #define MSG_UBL_MOVING_TO_NEXT            _UxGT("Nächster Punkt...")
-  #define MSG_UBL_ACTIVATE_MESH             _UxGT("UBL aktivieren")
-  #define MSG_UBL_DEACTIVATE_MESH           _UxGT("UBL deaktivieren")
-  #define MSG_UBL_SET_BED_TEMP              _UxGT("Bett Temp.")
-  #define MSG_UBL_CUSTOM_BED_TEMP           MSG_UBL_SET_BED_TEMP
-  #define MSG_UBL_SET_HOTEND_TEMP           _UxGT("Hotend Temp.")
-  #define MSG_UBL_CUSTOM_HOTEND_TEMP        MSG_UBL_SET_HOTEND_TEMP
-  #define MSG_UBL_EDIT_CUSTOM_MESH          _UxGT("Eigenes Netz bearb.")
-  #define MSG_UBL_FINE_TUNE_MESH            _UxGT("Feineinstellung...")
-  #define MSG_UBL_DONE_EDITING_MESH         _UxGT("Bearbeitung beendet")
-  #define MSG_UBL_BUILD_CUSTOM_MESH         _UxGT("Eigenes Netz erst.")
-  #define MSG_UBL_BUILD_MESH_MENU           _UxGT("Netz erstellen")
-  #define MSG_UBL_BUILD_PLA_MESH            _UxGT("Netz erstellen PLA")
-  #define MSG_UBL_BUILD_ABS_MESH            _UxGT("Netz erstellen ABS")
-  #define MSG_UBL_BUILD_COLD_MESH           _UxGT("Netz erstellen kalt")
-  #define MSG_UBL_MESH_HEIGHT_ADJUST        _UxGT("Netz Höhe einst.")
-  #define MSG_UBL_MESH_HEIGHT_AMOUNT        _UxGT("Height Amount")
-  #define MSG_UBL_VALIDATE_MESH_MENU        _UxGT("Netz validieren")
-  #define MSG_UBL_VALIDATE_PLA_MESH         _UxGT("Netz validieren PLA")
-  #define MSG_UBL_VALIDATE_ABS_MESH         _UxGT("Netz validieren ABS")
-  #define MSG_UBL_VALIDATE_CUSTOM_MESH      _UxGT("Eig. Netz validieren")
-  #define MSG_UBL_CONTINUE_MESH             _UxGT("Netzerst. forts.")
-  #define MSG_UBL_MESH_LEVELING             _UxGT("Netz Nivellierung")
-  #define MSG_UBL_3POINT_MESH_LEVELING      _UxGT("3-Punkt Nivellierung")
-  #define MSG_UBL_GRID_MESH_LEVELING        _UxGT("Gitternetz Nivell.")
-  #define MSG_UBL_MESH_LEVEL                _UxGT("Netz nivellieren")
-  #define MSG_UBL_SIDE_POINTS               _UxGT("Eckpunkte")
-  #define MSG_UBL_MAP_TYPE                  _UxGT("Kartentyp")
-  #define MSG_UBL_OUTPUT_MAP                _UxGT("Karte ausgeben")
-  #define MSG_UBL_OUTPUT_MAP_HOST           _UxGT("Ausgabe für Host")
-  #define MSG_UBL_OUTPUT_MAP_CSV            _UxGT("Ausgabe für CSV")
-  #define MSG_UBL_INFO_UBL                  _UxGT("UBL Info ausgeben")
-  #define MSG_UBL_EDIT_MESH_MENU            _UxGT("Netz bearbeiten")
-  #define MSG_UBL_FILLIN_AMOUNT             _UxGT("Menge an Fill-in")
-  #define MSG_UBL_MANUAL_FILLIN             _UxGT("Manuelles Fill-in")
-  #define MSG_UBL_SMART_FILLIN              _UxGT("Kluges Fill-in")
-  #define MSG_UBL_FILLIN_MESH               _UxGT("Fill-in Netz")
-  #define MSG_UBL_INVALIDATE_ALL            _UxGT("Alles annullieren")
-  #define MSG_UBL_INVALIDATE_CLOSEST        _UxGT("Nächstlieg. ann.")
-  #define MSG_UBL_FINE_TUNE_ALL             _UxGT("Feineinstellung Alle")
-  #define MSG_UBL_FINE_TUNE_CLOSEST         _UxGT("Feineinst. Nächstl.")
-  #define MSG_UBL_STORAGE_MESH_MENU         _UxGT("Netz Speicherplatz")
-  #define MSG_UBL_STORAGE_SLOT              _UxGT("Memory Slot")
-  #define MSG_UBL_LOAD_MESH                 _UxGT("Bett Netz laden")
-  #define MSG_UBL_SAVE_MESH                 _UxGT("Bett Netz speichern")
-  #define MSG_UBL_SAVE_ERROR                _UxGT("ERR:UBL speichern")
-  #define MSG_UBL_RESTORE_ERROR             _UxGT("ERR:UBL wiederherst.")
-  #define MSG_UBL_Z_OFFSET_STOPPED          _UxGT("Z-Versatz angehalten")
-#endif // AUTO_BED_LEVELING_UBL
+#define MSG_UBL_DOING_G29                 _UxGT("G29 UBL läuft!")
+#define MSG_UBL_UNHOMED                   _UxGT("Erst XYZ homen")
+#define MSG_UBL_TOOLS                     _UxGT("UBL Tools")
+#define MSG_UBL_LEVEL_BED                 _UxGT("Unified Bed Leveling")
+#define MSG_UBL_MANUAL_MESH               _UxGT("Netz manuell erst.")
+#define MSG_UBL_BC_INSERT                 _UxGT("Unterlegen & messen")
+#define MSG_UBL_BC_INSERT2                _UxGT("Messen")
+#define MSG_UBL_BC_REMOVE                 _UxGT("Entfernen & messen")
+#define MSG_UBL_MOVING_TO_NEXT            _UxGT("Nächster Punkt...")
+#define MSG_UBL_ACTIVATE_MESH             _UxGT("UBL aktivieren")
+#define MSG_UBL_DEACTIVATE_MESH           _UxGT("UBL deaktivieren")
+#define MSG_UBL_SET_BED_TEMP              _UxGT("Bett Temp.")
+#define MSG_UBL_CUSTOM_BED_TEMP           MSG_UBL_SET_BED_TEMP
+#define MSG_UBL_SET_HOTEND_TEMP           _UxGT("Hotend Temp.")
+#define MSG_UBL_CUSTOM_HOTEND_TEMP        MSG_UBL_SET_HOTEND_TEMP
+#define MSG_UBL_EDIT_CUSTOM_MESH          _UxGT("Eigenes Netz bearb.")
+#define MSG_UBL_FINE_TUNE_MESH            _UxGT("Feineinstellung...")
+#define MSG_UBL_DONE_EDITING_MESH         _UxGT("Bearbeitung beendet")
+#define MSG_UBL_BUILD_CUSTOM_MESH         _UxGT("Eigenes Netz erst.")
+#define MSG_UBL_BUILD_MESH_MENU           _UxGT("Netz erstellen")
+#define MSG_UBL_BUILD_PLA_MESH            _UxGT("Netz erstellen PLA")
+#define MSG_UBL_BUILD_ABS_MESH            _UxGT("Netz erstellen ABS")
+#define MSG_UBL_BUILD_COLD_MESH           _UxGT("Netz erstellen kalt")
+#define MSG_UBL_MESH_HEIGHT_ADJUST        _UxGT("Netz Höhe einst.")
+#define MSG_UBL_MESH_HEIGHT_AMOUNT        _UxGT("Height Amount")
+#define MSG_UBL_VALIDATE_MESH_MENU        _UxGT("Netz validieren")
+#define MSG_UBL_VALIDATE_PLA_MESH         _UxGT("Netz validieren PLA")
+#define MSG_UBL_VALIDATE_ABS_MESH         _UxGT("Netz validieren ABS")
+#define MSG_UBL_VALIDATE_CUSTOM_MESH      _UxGT("Eig. Netz validieren")
+#define MSG_UBL_CONTINUE_MESH             _UxGT("Netzerst. forts.")
+#define MSG_UBL_MESH_LEVELING             _UxGT("Netz Nivellierung")
+#define MSG_UBL_3POINT_MESH_LEVELING      _UxGT("3-Punkt Nivellierung")
+#define MSG_UBL_GRID_MESH_LEVELING        _UxGT("Gitternetz Nivell.")
+#define MSG_UBL_MESH_LEVEL                _UxGT("Netz nivellieren")
+#define MSG_UBL_SIDE_POINTS               _UxGT("Eckpunkte")
+#define MSG_UBL_MAP_TYPE                  _UxGT("Kartentyp")
+#define MSG_UBL_OUTPUT_MAP                _UxGT("Karte ausgeben")
+#define MSG_UBL_OUTPUT_MAP_HOST           _UxGT("Ausgabe für Host")
+#define MSG_UBL_OUTPUT_MAP_CSV            _UxGT("Ausgabe für CSV")
+#define MSG_UBL_INFO_UBL                  _UxGT("UBL Info ausgeben")
+#define MSG_UBL_EDIT_MESH_MENU            _UxGT("Netz bearbeiten")
+#define MSG_UBL_FILLIN_AMOUNT             _UxGT("Menge an Fill-in")
+#define MSG_UBL_MANUAL_FILLIN             _UxGT("Manuelles Fill-in")
+#define MSG_UBL_SMART_FILLIN              _UxGT("Kluges Fill-in")
+#define MSG_UBL_FILLIN_MESH               _UxGT("Fill-in Netz")
+#define MSG_UBL_INVALIDATE_ALL            _UxGT("Alles annullieren")
+#define MSG_UBL_INVALIDATE_CLOSEST        _UxGT("Nächstlieg. ann.")
+#define MSG_UBL_FINE_TUNE_ALL             _UxGT("Feineinstellung Alle")
+#define MSG_UBL_FINE_TUNE_CLOSEST         _UxGT("Feineinst. Nächstl.")
+#define MSG_UBL_STORAGE_MESH_MENU         _UxGT("Netz Speicherplatz")
+#define MSG_UBL_STORAGE_SLOT              _UxGT("Memory Slot")
+#define MSG_UBL_LOAD_MESH                 _UxGT("Bett Netz laden")
+#define MSG_UBL_SAVE_MESH                 _UxGT("Bett Netz speichern")
+#define MSG_UBL_SAVE_ERROR                _UxGT("ERR:UBL speichern")
+#define MSG_UBL_RESTORE_ERROR             _UxGT("ERR:UBL wiederherst.")
+#define MSG_UBL_Z_OFFSET_STOPPED          _UxGT("Z-Versatz angehalten")
 
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Gesamte Drucke")