mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
Move literal strings to language files
This commit is contained in:
Scott Lahteine
parent
aa9c1f1bed
commit
fd1ea9d56f
@ -159,6 +159,43 @@
|
||||
|
||||
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
|
||||
|
||||
// temperature.cpp strings
|
||||
#define MSG_PID_AUTOTUNE "PID Autotune"
|
||||
#define MSG_PID_AUTOTUNE_START MSG_PID_AUTOTUNE " start"
|
||||
#define MSG_PID_AUTOTUNE_FAILED MSG_PID_AUTOTUNE " failed!"
|
||||
#define MSG_PID_BAD_EXTRUDER_NUM MSG_PID_AUTOTUNE_FAILED " Bad extruder number"
|
||||
#define MSG_PID_TEMP_TOO_HIGH MSG_PID_AUTOTUNE_FAILED " Temperature too high"
|
||||
#define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout"
|
||||
#define MSG_BIAS " bias: "
|
||||
#define MSG_D " d: "
|
||||
#define MSG_MIN " min: "
|
||||
#define MSG_MAX " max: "
|
||||
#define MSG_KU " Ku: "
|
||||
#define MSG_TU " Tu: "
|
||||
#define MSG_CLASSIC_PID " Classic PID "
|
||||
#define MSG_KP " Kp: "
|
||||
#define MSG_KI " Ki: "
|
||||
#define MSG_KD " Kd: "
|
||||
#define MSG_OK_B "ok B:"
|
||||
#define MSG_OK_T "ok T:"
|
||||
#define MSG_AT " @:"
|
||||
#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
|
||||
#define MSG_PID_DEBUG " PID_DEBUG "
|
||||
#define MSG_PID_DEBUG_INPUT ": Input "
|
||||
#define MSG_PID_DEBUG_OUTPUT " Output "
|
||||
#define MSG_PID_DEBUG_PTERM " pTerm "
|
||||
#define MSG_PID_DEBUG_ITERM " iTerm "
|
||||
#define MSG_PID_DEBUG_DTERM " dTerm "
|
||||
#define MSG_HEATING_FAILED "Heating failed"
|
||||
#define MSG_EXTRUDER_SWITCHED_OFF "Extruder switched off. Temperature difference between temp sensors is too high !"
|
||||
|
||||
#define MSG_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
|
||||
#define MSG_THERMAL_RUNAWAY_STOP "Thermal Runaway, system stopped! Heater_ID: "
|
||||
#define MSG_SWITCHED_OFF_MAX " switched off. MAXTEMP triggered !!"
|
||||
#define MSG_MINTEMP_EXTRUDER_OFF ": Extruder switched off. MINTEMP triggered !"
|
||||
#define MSG_MAXTEMP_EXTRUDER_OFF ": Extruder" MSG_SWITCHED_OFF_MAX
|
||||
#define MSG_MAXTEMP_BED_OFF "Heated bed" MSG_SWITCHED_OFF_MAX
|
||||
|
||||
// LCD Menu Messages
|
||||
|
||||
// Add your own character. Reference: https://github.com/MarlinFirmware/Marlin/pull/1434 photos
|
||||
|
||||
@ -255,7 +255,7 @@
|
||||
#define MSG_VOLUMETRIC "Filament"
|
||||
#endif
|
||||
#ifndef MSG_VOLUMETRIC_ENABLED
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_0
|
||||
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
|
||||
@ -383,23 +383,41 @@
|
||||
#ifndef MSG_ENDSTOP_ABORT
|
||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||
#endif
|
||||
#ifndef MSG_HEATING_FAILED_LCD
|
||||
#define MSG_HEATING_FAILED_LCD "Heating failed"
|
||||
#endif
|
||||
#ifndef MSG_ERR_REDUNDANT_TEMP
|
||||
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
|
||||
#endif
|
||||
#ifndef MSG_THERMAL_RUNAWAY
|
||||
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
|
||||
#endif
|
||||
#ifndef MSG_ERR_MAXTEMP
|
||||
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
|
||||
#endif
|
||||
#ifndef MSG_ERR_MINTEMP
|
||||
#define MSG_ERR_MINTEMP "Err: MINTEMP"
|
||||
#endif
|
||||
#ifndef MSG_ERR_MAXTEMP_BED
|
||||
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
|
||||
#endif
|
||||
|
||||
#ifdef DELTA_CALIBRATION_MENU
|
||||
#ifndef MSG_DELTA_CALIBRATE
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_X
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Y
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Z
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_X
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Y
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_Z
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#endif
|
||||
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#endif
|
||||
#endif // DELTA_CALIBRATION_MENU
|
||||
|
||||
#endif // LANGUAGE_EN_H
|
||||
|
||||
@ -33,6 +33,7 @@
|
||||
#include "ultralcd.h"
|
||||
#include "temperature.h"
|
||||
#include "watchdog.h"
|
||||
#include "language.h"
|
||||
|
||||
#include "Sd2PinMap.h"
|
||||
|
||||
@ -228,11 +229,11 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
|| extruder < 0
|
||||
#endif
|
||||
) {
|
||||
SERIAL_ECHOLN("PID Autotune failed. Bad extruder number.");
|
||||
SERIAL_ECHOLN(MSG_PID_BAD_EXTRUDER_NUM);
|
||||
return;
|
||||
}
|
||||
|
||||
SERIAL_ECHOLN("PID Autotune start");
|
||||
SERIAL_ECHOLN(MSG_PID_AUTOTUNE_START);
|
||||
|
||||
disable_heater(); // switch off all heaters.
|
||||
|
||||
@ -287,22 +288,22 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
bias = constrain(bias, 20, max_pow - 20);
|
||||
d = (bias > max_pow / 2) ? max_pow - 1 - bias : bias;
|
||||
|
||||
SERIAL_PROTOCOLPGM(" bias: "); SERIAL_PROTOCOL(bias);
|
||||
SERIAL_PROTOCOLPGM(" d: "); SERIAL_PROTOCOL(d);
|
||||
SERIAL_PROTOCOLPGM(" min: "); SERIAL_PROTOCOL(min);
|
||||
SERIAL_PROTOCOLPGM(" max: "); SERIAL_PROTOCOLLN(max);
|
||||
SERIAL_PROTOCOLPGM(MSG_BIAS); SERIAL_PROTOCOL(bias);
|
||||
SERIAL_PROTOCOLPGM(MSG_D); SERIAL_PROTOCOL(d);
|
||||
SERIAL_PROTOCOLPGM(MSG_MIN); SERIAL_PROTOCOL(min);
|
||||
SERIAL_PROTOCOLPGM(MSG_MAX); SERIAL_PROTOCOLLN(max);
|
||||
if (cycles > 2) {
|
||||
Ku = (4.0 * d) / (3.14159265 * (max - min) / 2.0);
|
||||
Tu = ((float)(t_low + t_high) / 1000.0);
|
||||
SERIAL_PROTOCOLPGM(" Ku: "); SERIAL_PROTOCOL(Ku);
|
||||
SERIAL_PROTOCOLPGM(" Tu: "); SERIAL_PROTOCOLLN(Tu);
|
||||
SERIAL_PROTOCOLPGM(MSG_KU); SERIAL_PROTOCOL(Ku);
|
||||
SERIAL_PROTOCOLPGM(MSG_TU); SERIAL_PROTOCOLLN(Tu);
|
||||
Kp = 0.6 * Ku;
|
||||
Ki = 2 * Kp / Tu;
|
||||
Kd = Kp * Tu / 8;
|
||||
SERIAL_PROTOCOLLNPGM(" Classic PID ");
|
||||
SERIAL_PROTOCOLPGM(" Kp: "); SERIAL_PROTOCOLLN(Kp);
|
||||
SERIAL_PROTOCOLPGM(" Ki: "); SERIAL_PROTOCOLLN(Ki);
|
||||
SERIAL_PROTOCOLPGM(" Kd: "); SERIAL_PROTOCOLLN(Kd);
|
||||
SERIAL_PROTOCOLLNPGM(MSG_CLASSIC_PID);
|
||||
SERIAL_PROTOCOLPGM(MSG_KP); SERIAL_PROTOCOLLN(Kp);
|
||||
SERIAL_PROTOCOLPGM(MSG_KI); SERIAL_PROTOCOLLN(Ki);
|
||||
SERIAL_PROTOCOLPGM(MSG_KD); SERIAL_PROTOCOLLN(Kd);
|
||||
/*
|
||||
Kp = 0.33*Ku;
|
||||
Ki = Kp/Tu;
|
||||
@ -331,7 +332,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
}
|
||||
}
|
||||
if (input > temp + 20) {
|
||||
SERIAL_PROTOCOLLNPGM("PID Autotune failed! Temperature too high");
|
||||
SERIAL_PROTOCOLLNPGM(MSG_PID_TEMP_TOO_HIGH);
|
||||
return;
|
||||
}
|
||||
// Every 2 seconds...
|
||||
@ -339,26 +340,26 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
int p;
|
||||
if (extruder < 0) {
|
||||
p = soft_pwm_bed;
|
||||
SERIAL_PROTOCOLPGM("ok B:");
|
||||
SERIAL_PROTOCOLPGM(MSG_OK_B);
|
||||
}
|
||||
else {
|
||||
p = soft_pwm[extruder];
|
||||
SERIAL_PROTOCOLPGM("ok T:");
|
||||
SERIAL_PROTOCOLPGM(MSG_OK_T);
|
||||
}
|
||||
|
||||
SERIAL_PROTOCOL(input);
|
||||
SERIAL_PROTOCOLPGM(" @:");
|
||||
SERIAL_PROTOCOLPGM(MSG_AT);
|
||||
SERIAL_PROTOCOLLN(p);
|
||||
|
||||
temp_millis = ms;
|
||||
} // every 2 seconds
|
||||
// Over 2 minutes?
|
||||
if (((ms - t1) + (ms - t2)) > (10L*60L*1000L*2L)) {
|
||||
SERIAL_PROTOCOLLNPGM("PID Autotune failed! timeout");
|
||||
SERIAL_PROTOCOLLNPGM(MSG_PID_TIMEOUT);
|
||||
return;
|
||||
}
|
||||
if (cycles > ncycles) {
|
||||
SERIAL_PROTOCOLLNPGM("PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h");
|
||||
SERIAL_PROTOCOLLNPGM(MSG_PID_AUTOTUNE_FINISHED);
|
||||
return;
|
||||
}
|
||||
lcd_update();
|
||||
@ -571,17 +572,17 @@ void manage_heater() {
|
||||
|
||||
#ifdef PID_DEBUG
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(" PID_DEBUG ");
|
||||
SERIAL_ECHO(MSG_PID_DEBUG);
|
||||
SERIAL_ECHO(e);
|
||||
SERIAL_ECHO(": Input ");
|
||||
SERIAL_ECHO(MSG_PID_DEBUG_INPUT);
|
||||
SERIAL_ECHO(pid_input);
|
||||
SERIAL_ECHO(" Output ");
|
||||
SERIAL_ECHO(MSG_PID_DEBUG_OUTPUT);
|
||||
SERIAL_ECHO(pid_output);
|
||||
SERIAL_ECHO(" pTerm ");
|
||||
SERIAL_ECHO(MSG_PID_DEBUG_PTERM);
|
||||
SERIAL_ECHO(pTerm[e]);
|
||||
SERIAL_ECHO(" iTerm ");
|
||||
SERIAL_ECHO(MSG_PID_DEBUG_ITERM);
|
||||
SERIAL_ECHO(iTerm[e]);
|
||||
SERIAL_ECHO(" dTerm ");
|
||||
SERIAL_ECHO(MSG_PID_DEBUG_DTERM);
|
||||
SERIAL_ECHOLN(dTerm[e]);
|
||||
#endif //PID_DEBUG
|
||||
|
||||
@ -599,9 +600,9 @@ void manage_heater() {
|
||||
if (watchmillis[e] && ms > watchmillis[e] + WATCH_TEMP_PERIOD) {
|
||||
if (degHotend(e) < watch_start_temp[e] + WATCH_TEMP_INCREASE) {
|
||||
setTargetHotend(0, e);
|
||||
LCD_MESSAGEPGM("Heating failed");
|
||||
LCD_MESSAGEPGM(MSG_HEATING_FAILED_LCD); // translatable
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Heating failed");
|
||||
SERIAL_ECHOLNPGM(MSG_HEATING_FAILED);
|
||||
}
|
||||
else {
|
||||
watchmillis[e] = 0;
|
||||
@ -614,8 +615,8 @@ void manage_heater() {
|
||||
disable_heater();
|
||||
if (IsStopped() == false) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Extruder switched off. Temperature difference between temp sensors is too high !");
|
||||
LCD_ALERTMESSAGEPGM("Err: REDUNDANT TEMP ERROR");
|
||||
SERIAL_ERRORLNPGM(MSG_EXTRUDER_SWITCHED_OFF);
|
||||
LCD_ALERTMESSAGEPGM(MSG_ERR_REDUNDANT_TEMP); // translatable
|
||||
}
|
||||
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
Stop();
|
||||
@ -728,7 +729,7 @@ static float analog2temp(int raw, uint8_t e) {
|
||||
{
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERROR((int)e);
|
||||
SERIAL_ERRORLNPGM(" - Invalid extruder number !");
|
||||
SERIAL_ERRORLNPGM(MSG_INVALID_EXTRUDER_NUM);
|
||||
kill();
|
||||
return 0.0;
|
||||
}
|
||||
@ -1074,9 +1075,9 @@ void thermal_runaway_protection(int *state, unsigned long *timer, float temperat
|
||||
else if ( (ms - *timer) > ((unsigned long) period_seconds) * 1000)
|
||||
{
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Thermal Runaway, system stopped! Heater_ID: ");
|
||||
SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP);
|
||||
SERIAL_ERRORLN((int)heater_id);
|
||||
LCD_ALERTMESSAGEPGM("THERMAL RUNAWAY");
|
||||
LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY); // translatable
|
||||
thermal_runaway = true;
|
||||
while(1)
|
||||
{
|
||||
@ -1140,8 +1141,8 @@ void max_temp_error(uint8_t e) {
|
||||
if(IsStopped() == false) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLN((int)e);
|
||||
SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !");
|
||||
LCD_ALERTMESSAGEPGM("Err: MAXTEMP");
|
||||
SERIAL_ERRORLNPGM(MSG_MAXTEMP_EXTRUDER_OFF);
|
||||
LCD_ALERTMESSAGEPGM(MSG_ERR_MAXTEMP); // translatable
|
||||
}
|
||||
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
Stop();
|
||||
@ -1153,8 +1154,8 @@ void min_temp_error(uint8_t e) {
|
||||
if(IsStopped() == false) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLN((int)e);
|
||||
SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !");
|
||||
LCD_ALERTMESSAGEPGM("Err: MINTEMP");
|
||||
SERIAL_ERRORLNPGM(MSG_MINTEMP_EXTRUDER_OFF);
|
||||
LCD_ALERTMESSAGEPGM(MSG_ERR_MINTEMP); // translatable
|
||||
}
|
||||
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
Stop();
|
||||
@ -1167,8 +1168,8 @@ void bed_max_temp_error(void) {
|
||||
#endif
|
||||
if (IsStopped() == false) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!");
|
||||
LCD_ALERTMESSAGEPGM("Err: MAXTEMP BED");
|
||||
SERIAL_ERRORLNPGM(MSG_MAXTEMP_BED_OFF);
|
||||
LCD_ALERTMESSAGEPGM(MSG_ERR_MAXTEMP_BED); // translatable
|
||||
}
|
||||
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
Stop();
|
||||
|
||||
Loading…
Reference in New Issue
Block a user