diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h index e05d587495..2b2e89e46d 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h @@ -235,6 +235,14 @@ void ST7920_Lite_Status_Screen::draw_gdram_icon(uint8_t x, uint8_t y, const void #define CGRAM_ICON_3_WORD 0x04 #define CGRAM_ICON_4_WORD 0x06 +const uint8_t degree_symbol_y_top = 1; +PROGMEM const uint8_t degree_symbol[] = { + 0b00110000, + 0b01001000, + 0b01001000, + 0b00110000, +}; + const uint16_t nozzle_icon[] PROGMEM = { 0b0000000000000000, 0b0000000000000000, @@ -352,24 +360,54 @@ const uint16_t fan2_icon[] PROGMEM = { const uint16_t feedrate_icon[] PROGMEM = { 0b0000000000000000, 0b0111111000000000, - 0b0100000000000000, - 0b0100000000000000, - 0b0100000000000000, + 0b0110000000000000, + 0b0110000000000000, + 0b0110000000000000, 0b0111111011111000, - 0b0100000010000100, - 0b0100000010000100, - 0b0100000010000100, - 0b0100000011111000, - 0b0000000010001000, - 0b0000000010000100, - 0b0000000010000100, - 0b0000000010000010, + 0b0110000011001100, + 0b0110000011001100, + 0b0110000011001100, + 0b0110000011111000, + 0b0000000011001100, + 0b0000000011001100, + 0b0000000011001100, + 0b0000000011001100, 0b0000000000000000, 0b0000000000000000 }; /************************** MAIN SCREEN *************************************/ +// The ST7920 does not have a degree character, but we +// can fake it by writing it to GDRAM. +// This function takes as an argument character positions +// i.e x is [1-16], while the y position is [1-4] +void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool draw) { + const uint8_t *p_bytes = degree_symbol; + if (y > 2) { + // Handle display folding + y -= 2; + x += 16; + } + x -= 1; + y -= 1; + const bool oddChar = x & 1; + const uint8_t x_word = x >> 1; + const uint8_t y_top = degree_symbol_y_top; + const uint8_t y_bot = y_top + sizeof(degree_symbol)/sizeof(degree_symbol[0]); + for(uint8_t i = y_top; i < y_bot; i++) { + uint8_t byte = pgm_read_byte_near(p_bytes++); + set_gdram_address(x_word,i+y*16); + begin_data(); + if (draw) { + write_byte(oddChar ? 0x00 : byte); + write_byte(oddChar ? byte : 0x00); + } + else + write_word(0x0000); + } +} + void ST7920_Lite_Status_Screen::draw_static_elements() { scroll_or_addr_select(0); @@ -406,13 +444,13 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { // If we have only one extruder, draw a long progress bar on the third line const uint8_t top = 1, // Top in pixels bottom = 13, // Bottom in pixels - left = 8, // Left edge, in 16-bit words - width = 5; // Width of progress bar, in 16-bit words + left = 12, // Left edge, in 16-bit words + width = 4; // Width of progress bar, in 16-bit words #else - const uint8_t top = 16 + 1, // Top in pixels - bottom = 16 + 13, // Bottom in pixels - left = 5, // Left edge, in 16-bit words - width = 3; // Width of progress bar, in 16-bit words + const uint8_t top = 16 + 1, + bottom = 16 + 13, + left = 5, + width = 3; #endif const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent? @@ -439,15 +477,16 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { } // Draw the percentage as text in DDRAM - set_ddram_address( - #if EXTRUDERS == 1 - DDRAM_LINE_3 + 1 - #else - DDRAM_LINE_2 + left - #endif - ); + #if EXTRUDERS == 1 + set_ddram_address(DDRAM_LINE_3 + 4); + begin_data(); + write_byte(' '); + #else + set_ddram_address(DDRAM_LINE_2 + left); + begin_data(); + #endif - begin_data(); + // Draw centered if (value > 9) { write_number(value, 4); write_str(F("% ")); @@ -481,65 +520,85 @@ void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool } } -#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 1) +#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 2) -void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target) { - set_ddram_address(DDRAM_LINE_1 + 1); +static struct { + bool E1_show_target : 1; + bool E2_show_target : 1; + #if HAS_HEATER_BED + bool bed_show_target : 1; + #endif +} display_state = { + true, true + #if HAS_HEATER_BED + , true + #endif +}; + +void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange) { + switch (line) { + case 1: set_ddram_address(DDRAM_LINE_1 + 1); break; + case 2: set_ddram_address(DDRAM_LINE_2 + 1); break; + case 3: set_ddram_address(DDRAM_LINE_3 + 1); break; + case 4: set_ddram_address(DDRAM_LINE_3 + 1); break; + } begin_data(); write_number(temp); - if (target && FAR(temp, target)) { + + if (showTarget) { write_str(F("\x1A")); write_number(target); + }; + + if (targetStateChange) { + if (!showTarget) write_str(F(" ")); + draw_degree_symbol(6, line, !showTarget); + draw_degree_symbol(10, line, showTarget); } - else - write_str(F(" ")); } -void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target) { - set_ddram_address(DDRAM_LINE_2 + 1); - begin_data(); - write_number(temp); - if (target && FAR(temp, target)) { - write_str(F("\x1A")); - write_number(target); - } - else - write_str(F(" ")); +void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate) { + const bool show_target = target && FAR(temp, target); + draw_temps(1, temp, target, show_target, display_state.E1_show_target != show_target || forceUpdate); + display_state.E1_show_target = show_target; } -void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target) { - set_ddram_address( - #if EXTRUDERS == 1 - DDRAM_LINE_2 + 1 - #else - DDRAM_LINE_3 + 1 - #endif - ); - begin_data(); - write_number(temp); - if (target && FAR(temp, target)) { - write_str(F("\x1A")); - write_number(target); - } - else - write_str(F(" ")); +void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate) { + const bool show_target = target && FAR(temp, target); + draw_temps(2, temp, target, show_target, display_state.E2_show_target != show_target || forceUpdate); + display_state.E2_show_target = show_target; } +#if HAS_HEATER_BED + void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) { + const bool show_target = target && FAR(temp, target); + draw_temps(2 + #if EXTRUDERS > 1 + + 1 + #endif + , temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate + ); + display_state.bed_show_target = show_target; + } +#endif + void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) { set_ddram_address(DDRAM_LINE_1 + 6); begin_data(); - write_number(value, 4); + write_number(value, 3); + write_byte('%'); } -void ST7920_Lite_Status_Screen::draw_print_time(const uint32_t elapsed) { - const uint8_t hrs = elapsed / 3600, - min = (elapsed / 60) % 60; +void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) { + #if EXTRUDERS == 1 + set_ddram_address(DDRAM_LINE_3); + #else + set_ddram_address(DDRAM_LINE_3 + 5); + #endif char str[7]; - sprintf_P(str, hrs > 99 ? PSTR("%03d:%02d") : PSTR(" %02d:%02d"), hrs, min); - - set_ddram_address(DDRAM_LINE_3 + 5); + str[elapsed.toDigital(str)] = ' '; begin_data(); - write_str(str); + write_str(str, 6); } void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) { @@ -548,7 +607,8 @@ void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentag #if EXTRUDERS == 1 set_ddram_address(DDRAM_LINE_2 + 6); begin_data(); - write_number(percentage, 4); + write_number(percentage, 3); + write_byte('%'); #endif } @@ -616,26 +676,23 @@ bool ST7920_Lite_Status_Screen::indicators_changed() { const bool blink = lcd_blink(); const uint8_t feedrate_perc = feedrate_percentage; const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; - const float extruder_1_target = thermalManager.degTargetHotend(0); + const int16_t extruder_1_target = thermalManager.degTargetHotend(0); #if EXTRUDERS == 2 - const float extruder_2_target = thermalManager.degTargetHotend(1); + const int16_t extruder_2_target = thermalManager.degTargetHotend(1); #endif - const float bed_target = thermalManager.degTargetBed(); - - static uint8_t last_checksum = 0; - - const uint8_t checksum = - uint8_t(blink) ^ - uint8_t(feedrate_perc) ^ - uint8_t(fan_speed) ^ - uint8_t(extruder_1_target) ^ + #if HAS_HEATER_BED + const int16_t bed_target = thermalManager.degTargetBed(); + #endif + static uint16_t last_checksum = 0; + const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target #if EXTRUDERS == 2 - uint8_t(extruder_2_target) ^ + ^ extruder_2_target #endif - uint8_t(bed_target); - + #if HAS_HEATER_BED + ^ bed_target + #endif + ; if (last_checksum == checksum) return false; - last_checksum = checksum; return true; } @@ -644,33 +701,38 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { if (forceUpdate || indicators_changed()) { const bool blink = lcd_blink(); const duration_t elapsed = print_job_timer.duration(); - const uint32_t seconds_elapsed = elapsed.value; const uint8_t feedrate_perc = feedrate_percentage; const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; - const float extruder_1_temp = thermalManager.degHotend(0); - const float extruder_1_target = thermalManager.degTargetHotend(0); + const int16_t extruder_1_temp = thermalManager.degHotend(0), + extruder_1_target = thermalManager.degTargetHotend(0); #if EXTRUDERS == 2 - const float extruder_2_temp = thermalManager.degHotend(1); - const float extruder_2_target = thermalManager.degTargetHotend(1); + const int16_t extruder_2_temp = thermalManager.degHotend(1), + extruder_2_target = thermalManager.degTargetHotend(1); + #endif + #if HAS_HEATER_BED + const int16_t bed_temp = thermalManager.degBed(), + bed_target = thermalManager.degTargetBed(); #endif - const float bed_temp = thermalManager.degBed(); - const float bed_target = thermalManager.degTargetBed(); - draw_extruder_1_temp(extruder_1_temp, extruder_1_target); + draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate); #if EXTRUDERS == 2 - draw_extruder_2_temp(extruder_2_temp, extruder_2_target); + draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate); + #endif + #if HAS_HEATER_BED + draw_bed_temp(bed_temp, bed_target, forceUpdate); #endif - draw_bed_temp(bed_temp, bed_target); draw_fan_speed(fan_speed); - draw_print_time(seconds_elapsed); + draw_print_time(elapsed); draw_feedrate_percentage(feedrate_perc); // Update the fan and bed animations if (fan_speed > 0) draw_fan_icon(blink); - if (bed_target > 0) - draw_heat_icon(blink, true); - else - draw_heat_icon(false, false); + #if HAS_HEATER_BED + if (bed_target > 0) + draw_heat_icon(blink, true); + else + draw_heat_icon(false, false); + #endif } } @@ -689,7 +751,6 @@ bool ST7920_Lite_Status_Screen::position_changed() { bool ST7920_Lite_Status_Screen::status_changed() { uint8_t checksum = 0; for (const char *p = lcd_status_message; *p; p++) checksum ^= *p; - static uint8_t last_checksum = 0; if (last_checksum == checksum) return false; last_checksum = checksum; @@ -766,23 +827,24 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) { } void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) { - const uint8_t percent_done = - #if ENABLED(SDSUPPORT) - card.percentDone() - #else - 0 - #endif - ; + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + uint8_t progress_bar_percent; + #endif + + // Set current percentage from SD when actively printing + #if ENABLED(SDSUPPORT) + if (IS_SD_PRINTING) progress_bar_percent = card.percentDone(); + #endif // Since the progress bar involves writing // quite a few bytes to GDRAM, only do this // when an update is actually necessary. static uint8_t last_progress = 0; - if (!forceUpdate && last_progress == percent_done) return; - last_progress = percent_done; + if (!forceUpdate && last_progress == progress_bar_percent) return; + last_progress = progress_bar_percent; - draw_progress_bar(percent_done); + draw_progress_bar(progress_bar_percent); } void ST7920_Lite_Status_Screen::update(const bool forceUpdate) { diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h index 5812e4751a..9ae4fc48c3 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h @@ -18,6 +18,7 @@ #define STATUS_SCREEN_LITE_ST7920_CLASS_H #include "../../core/macros.h" +#include "../../libs/duration_t.h" typedef const __FlashStringHelper *progmem_str; @@ -75,15 +76,17 @@ class ST7920_Lite_Status_Screen { static uint8_t string_checksum(const char *str); protected: + static void draw_degree_symbol(uint8_t x, uint8_t y, bool draw); static void draw_static_elements(); static void draw_progress_bar(const uint8_t value); static void draw_fan_icon(const bool whichIcon); static void draw_heat_icon(const bool whichIcon, const bool heating); - static void draw_extruder_1_temp(const int16_t temp, const int16_t target); - static void draw_extruder_2_temp(const int16_t temp, const int16_t target); - static void draw_bed_temp(const int16_t temp, const int16_t target); + static void draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange); + static void draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate = false); + static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate = false); + static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate = false); static void draw_fan_speed(const uint8_t value); - static void draw_print_time(const uint32_t elapsed); + static void draw_print_time(const duration_t &elapsed); static void draw_feedrate_percentage(const uint8_t percentage); static void draw_status_message(const char *str); static void draw_position(const float x, const float y, const float z, bool position_known = true);