3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-29 14:57:05 +00:00
Code Issues Releases Wiki Activity

🔧 Clarify WIFISUPPORT (#26097)

Browse Source
This commit is contained in:
Scott Lahteine 2023-08-07 04:24:04 -05:00 committed by GitHub
parent 709def5e7b
commit fecadaca82
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 33 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Marlin/Configuration_adv.h
View File

@ -4222,13 +4222,17 @@
#endif
/**
* WiFi Support (Espressif ESP32 WiFi)
* Native ESP32 board with WiFi or add-on ESP32 WiFi-101 module
*/
//#define WIFISUPPORT // Marlin embedded WiFi management
//#define WIFISUPPORT // Marlin embedded WiFi management. Not needed for simple WiFi serial port.
//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT)
//#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
/**
* Extras for an ESP32-based motherboard with WIFISUPPORT
* These options don't apply to add-on WiFi modules based on ESP32 WiFi101.
*/
#if ENABLED(WIFISUPPORT)
//#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS
//#define OTASUPPORT // Support over-the-air firmware updates
//#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host

20
Marlin/src/inc/SanityCheck.h
View File

@ -3810,12 +3810,20 @@ static_assert(_PLUS_TEST(3), "DEFAULT_MAX_ACCELERATION values must be positive."
/**
* Sanity check WiFi options
*/
#if ENABLED(ESP3D_WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
#error "ESP3D_WIFISUPPORT requires an ESP32 MOTHERBOARD."
#elif ENABLED(WEBSUPPORT) && NONE(ARDUINO_ARCH_ESP32, WIFISUPPORT)
#error "WEBSUPPORT requires WIFISUPPORT and an ESP32 MOTHERBOARD."
#elif ALL(ESP3D_WIFISUPPORT, WIFISUPPORT)
#error "Enable only one of ESP3D_WIFISUPPORT or WIFISUPPORT."
#if ALL(WIFISUPPORT, ESP3D_WIFISUPPORT)
#error "Enable only one of WIFISUPPORT or ESP3D_WIFISUPPORT."
#elif ENABLED(ESP3D_WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
#error "ESP3D_WIFISUPPORT requires an ESP32 motherboard."
#elif ALL(ARDUINO_ARCH_ESP32, WIFISUPPORT)
#if !(defined(WIFI_SSID) && defined(WIFI_PWD))
#error "ESP32 motherboard with WIFISUPPORT requires WIFI_SSID and WIFI_PWD."
#endif
#elif ENABLED(WIFI_CUSTOM_COMMAND)
#error "WIFI_CUSTOM_COMMAND requires an ESP32 motherboard and WIFISUPPORT."
#elif ENABLED(OTASUPPORT)
#error "OTASUPPORT requires an ESP32 motherboard and WIFISUPPORT."
#elif defined(WIFI_SSID) || defined(WIFI_PWD)
#error "WIFI_SSID and WIFI_PWD only apply to ESP32 motherboard with WIFISUPPORT."
#endif
/**

4
Marlin/src/module/temperature.cpp
View File

@ -3080,7 +3080,9 @@ void Temperature::init() {
#if HAS_THERMAL_PROTECTION
#pragma GCC diagnostic push
#if __has_cpp_attribute(fallthrough)
#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
#endif
Temperature::tr_state_machine_t Temperature::tr_state_machine[NR_HEATER_RUNAWAY]; // = { { TRInactive, 0 } };
@ -3978,7 +3980,9 @@ void Temperature::isr() {
switch (adc_sensor_state) {
#pragma GCC diagnostic push
#if __has_cpp_attribute(fallthrough)
#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
#endif
case SensorsReady: {
// All sensors have been read. Stay in this state for a few

4
buildroot/tests/esp32
View File

@ -12,8 +12,8 @@ set -e
restore_configs
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 TX_BUFFER_SIZE 64 \
WIFI_SSID '"ssid"' WIFI_PWD '"password"'
opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REPORT REPETIER_GCODE_M360
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3"
opt_enable WIFISUPPORT WEBSUPPORT OTASUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REPORT REPETIER_GCODE_M360
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT and OTASUPPORT" "$3"
#
# Build with TMC drivers using hardware serial

8
buildroot/tests/mks_tinybee
View File

@ -10,11 +10,9 @@ set -e
# Build with ESP3D WiFi, OTA and custom WIFI commands support
#
restore_configs
opt_set MOTHERBOARD BOARD_MKS_TINYBEE TX_BUFFER_SIZE 64 \
WIFI_SSID '"ssid"' WIFI_PWD '"password"' \
SERIAL_PORT_2 -1 BAUDRATE_2 250000
opt_enable ESP3D_WIFISUPPORT WEBSUPPORT OTASUPPORT WIFI_CUSTOM_COMMAND
exec_test $1 "$2" "MKS TinyBee with ESP3D_WIFISUPPORT" "$3"
opt_set MOTHERBOARD BOARD_MKS_TINYBEE TX_BUFFER_SIZE 64 SERIAL_PORT_2 -1 BAUDRATE_2 250000
opt_enable ESP3D_WIFISUPPORT
exec_test $1 $2 "MKS TinyBee with ESP3D_WIFISUPPORT" "$3"
#
# Build with LCD, SD support and Speaker support