paclema
013a09dbe6
Added configurable script for filrunout form configuration.h
2015-04-29 21:38:40 +02:00
Scott Lahteine
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
2015-04-27 22:35:41 -07:00
Scott Lahteine
31516e2a3b
Merge pull request #1985 from Arengorn/Development
...
Update of servo.h
2015-04-27 22:10:02 -07:00
Scott Lahteine
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
2015-04-27 21:47:47 -07:00
Scott Lahteine
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
2015-04-27 21:41:14 -07:00
Scott Lahteine
71a0b1a5bb
Disable endstops between homing bumps
2015-04-27 21:14:30 -07:00
Scott Lahteine
c36226c4dc
Fix homing Z position
...
Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the
planner position in sync when homing.
2015-04-27 20:55:19 -07:00
Scott Lahteine
ff178d8cf7
Change M421 to take coordinates
...
This makes `M421` more amenable for irregular matrices
2015-04-27 19:48:34 -07:00
Bernardo
ff67ee73fc
Update Marlin_main.cpp
...
Corrected "servo.h" to "Servo.h" because of the updated filename.
2015-04-27 23:29:16 -03:00
Steve Kelly
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
2015-04-27 16:17:30 -04:00
Scott Lahteine
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
2015-04-26 20:56:33 -07:00
Scott Lahteine
d43cc2dd5f
M111 - Debug Level
...
- Add `M111` as a standard option to set the debug level
- Implement `DEBUG_ECHO` in `process_commands`
- Other debug levels (e.g., `DEBUG_DRYRUN`) need more work
2015-04-26 20:08:45 -07:00
Scott Lahteine
a22a228bcc
Rename files to move them in the IDE
2015-04-25 21:04:54 -07:00
Scott Lahteine
0438f0d835
Merge pull request #1924 from thinkyhead/raise_z_for_m401_m402
...
Raise Z for M401 and M402
2015-04-24 22:41:12 -07:00
Scott Lahteine
b275946a52
Merge pull request #1966 from thinkyhead/g4_dwell_message
...
G4 shows status message only if no message is set already
2015-04-24 22:02:37 -07:00
Scott Lahteine
182f2cda35
Minor cleanup of M48
2015-04-24 21:26:36 -07:00
Scott Lahteine
3a6fd912cd
Latest upstream commits, merged
2015-04-24 21:14:13 -07:00
Scott Lahteine
3c9e94e035
Merge pull request #1964 from AnHardt/Max6675again
...
Add variant for MAX6675 in M104
2015-04-24 20:44:45 -07:00
Scott Lahteine
56ff46eb8b
Improve code_has_value test
2015-04-24 20:43:16 -07:00
Scott Lahteine
ce142afdda
G4 shows status message only if no message is set already
...
- Address issue raised in #1961
2015-04-24 20:13:01 -07:00
Scott Lahteine
35e79d56a5
Remove set-coordinate extension of G28
2015-04-24 19:23:12 -07:00
Scott Lahteine
3a74bb5039
Merge pull request #1945 from Wurstnase/max_endstopp
...
Max endstopp
2015-04-24 19:17:38 -07:00
AnHardt
0fed46360c
Add variant for MAX6675 in M104
...
Else will throw error:
@:0 B@:0
Error:No thermistors - no temperature
[ERROR] Error:No thermistors - no temperature
when no bed is defined
2015-04-24 16:43:19 +02:00
Scott Lahteine
588ed70d4a
Latest upstream commits, merged
2015-04-23 21:18:48 -07:00
Scott Lahteine
0165560333
Apply zprobe_zoffset in axis_is_at_home
...
Ensure the probe offset will always be included when homing Z.
2015-04-23 21:12:38 -07:00
Scott Lahteine
075386e7fe
Merge pull request #1959 from thinkyhead/lcd_move_rate
...
Include axis parameter to ultralcd's line_to_current
2015-04-23 21:06:57 -07:00
Scott Lahteine
2558c10c6c
Use the slower feedrate for XY axes
2015-04-23 20:06:17 -07:00
Scott Lahteine
64268f3312
Fixup axis_is_at_home a little
2015-04-23 18:16:44 -07:00
Scott Lahteine
996d0a9185
Squish the code down a little
2015-04-23 18:06:36 -07:00
Scott Lahteine
8534bc376c
Fix homing of YZ with DUAL_X_CARRIAGE
2015-04-23 17:56:37 -07:00
Scott Lahteine
3b97a7d446
Merge pull request #1944 from AnHardt/beep2
...
More Beeper clean up
2015-04-23 17:50:02 -07:00
Wurstnase
be9e4ceddc
fix typo
...
c'n'p ftw :/
2015-04-23 10:35:14 +02:00
unknown
c26d816839
filter any 0
2015-04-22 12:09:57 +02:00
Wurstnase
61ae43f35e
v <-> code_value
2015-04-20 23:31:10 +02:00
Wurstnase
da0d91a79b
max endstopp
...
no user will home to 0 with a max endstopp
2015-04-20 23:28:46 +02:00
AnHardt
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
2015-04-20 11:11:13 +02:00
AnHardt
671aaf2dc9
Minor fix for M300
...
Corrected wrong order of parameters.
2015-04-19 13:25:20 +02:00
Scott Lahteine
d931220a65
Tweak comments
2015-04-18 23:12:29 -07:00
Scott Lahteine
47847765e2
Add M410 QuickStop command
2015-04-18 23:07:48 -07:00
Scott Lahteine
63b98b8280
Raise Z for M401 and M402
2015-04-16 07:24:33 -07:00
paclema
cde5eee2a5
Removed unnecessary comments
2015-04-15 19:01:09 +02:00
paclema
e1b69db6d1
Fixed M48 mismatch between n and P parameter on documentation
2015-04-15 18:17:58 +02:00
Scott Lahteine
e0e68c5cbc
Rename servos[] array in Marlin to servo[]
2015-04-14 03:13:25 -07:00
Scott Lahteine
642f6a92bc
fix type of code_has_value
2015-04-13 18:02:17 -07:00
Scott Lahteine
17ad80c1e1
Spacing in XYZ_CONSTS
2015-04-13 17:58:47 -07:00
Scott Lahteine
09d60e0128
Naming and code comments
2015-04-13 17:17:36 -07:00
Mehmet Sutas
5a9e45cc4a
Fix Syntax Error Filament Runout Statement
2015-04-13 22:37:18 +03:00
Scott Lahteine
ccddc280be
Apply three more commits
2015-04-12 22:47:44 -07:00
Scott Lahteine
ac2b23f574
Homing fixes
...
- Prevent `Z_SAFE_HOMING` from homing Z twice in some cases
- Allow `G28` with XYZ values of 0 to explicitly set the position
- Don’t add `home_offset` when setting XYZ explicitly in `G28`
- Add `code_has_value` function to check for the presence of a numeric
value (could just test for space or nul to allow other types of values)
2015-04-11 20:06:48 -07:00
Scott Lahteine
5fe382949b
Some G-Codes comment cleanup
2015-04-10 16:16:13 -07:00
