AnHardt
9d2a980bcf
Merge pull request #2170 from thinkyhead/beep_M600_elsewise
...
Slight size reduction by adding idle()
2015-05-30 12:42:32 +02:00
AnHardt
2728dc0606
Merge pull request #2194 from thinkyhead/reduce_strings
...
Redo "invalid extruder" to save 304 bytes
2015-05-30 11:05:08 +02:00
Scott Lahteine
be5236e839
Reduce setTargetedHotend by removing the switch
2015-05-29 18:03:58 -07:00
Scott Lahteine
06f401e7e5
Redo "invalid extruder" to save 264 bytes
...
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
2015-05-28 22:25:28 -07:00
Scott Lahteine
1a882bcc2e
Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands
...
Ignore unknown commands if they start with G, M, or T
2015-05-28 22:03:48 -07:00
Scott Lahteine
a672872717
Merge pull request #2187 from AnHardt/MAX6675M105
...
Print active extruder with M105 for MAX6675
2015-05-28 18:12:48 -07:00
Scott Lahteine
9beed830eb
Drop commented code_is_good lines
2015-05-28 17:53:47 -07:00
Scott Lahteine
068d4a1eb2
Ignore unknown commands if they start with G, M, or T
2015-05-28 17:44:09 -07:00
Scott Lahteine
c5c9d12630
Merge pull request #2183 from AnHardt/displayinit
...
Initialize the display earlier
2015-05-28 16:29:18 -07:00
Scott Lahteine
0564625757
Update M33 for new gcode parser
2015-05-28 14:17:39 -07:00
AnHardt
af7e3f5076
Print active extruder with M105 for MAX6675
...
Was omitted when T0 is a MAX6675.
2015-05-28 19:03:16 +02:00
AnHardt
f0523b5816
Initialize the display earlier
...
to have it ready to display errors during (temperature)-setup.
2015-05-28 16:08:17 +02:00
Scott Lahteine
03d5709b09
M110 is a known command
...
- The command parser now displays “unknown command” in more cases.
Known commands must be added to the `switch` inside `process_commands`
to suppress the error.
2015-05-26 20:31:18 -07:00
Scott Lahteine
d76a01194d
Slight size reduction by adding idle()
2015-05-26 20:08:21 -07:00
Scott Lahteine
68f6f149d0
Reduce code size with out_of_range_error function
...
- Affects code size when automatic bed leveling is enabled
2015-05-24 20:18:02 -07:00
Scott Lahteine
b55f8718c3
Indent G90/G91, G92
2015-05-22 17:34:08 -07:00
Scott Lahteine
b0d520b109
Indent G30, G31/G32
2015-05-22 17:33:17 -07:00
Scott Lahteine
ffe27a6225
Indent G29
2015-05-22 17:32:46 -07:00
Scott Lahteine
86083badc2
Indent G4, G10/G11, G28
2015-05-22 17:32:27 -07:00
Scott Lahteine
47d7a9cb5e
Indent G2/G3
2015-05-22 17:31:38 -07:00
Scott Lahteine
350f239d84
Indent G0/G1
2015-05-22 17:31:24 -07:00
Scott Lahteine
15a2351675
No need for +1 on initial seen_pointer
2015-05-22 15:31:30 -07:00
Scott Lahteine
550dd87b2a
Set seen_pointer before calling code_value
2015-05-22 15:11:48 -07:00
Scott Lahteine
04a1622172
Merge pull request #2127 from Wackerbarth/Kossel_Pro
...
Kossel Pro
2015-05-21 18:43:26 -07:00
Scott Lahteine
f919a2fed1
Merge pull request #2134 from AnHardt/preheat-all
...
Shift call of start_watching_heater() into setTargetHotend()
2015-05-21 18:36:28 -07:00
AnHardt
0c0ace2a04
Remove start_watching_heater() fom M104 and M109
2015-05-22 01:44:50 +02:00
Scott Lahteine
bde9c70d42
Suppress the line mismatch error after M303
2015-05-21 16:27:22 -07:00
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
2015-05-21 16:22:47 -07:00
Scott Lahteine
4d11b29959
Merge pull request #2113 from thinkyhead/command_sanitizer
...
Command sanitizer
2015-05-21 16:21:58 -07:00
Richard Wackerbarth
735bf2d35f
Describe Custom M Code
2015-05-21 08:06:33 -05:00
Scott Lahteine
f39658c822
M120 and M121 are reversed
2015-05-21 00:17:44 -07:00
AnHardt
89d2ee6f13
Make output on display dependant of ULTRA_LCD
2015-05-20 22:03:16 +02:00
AnHardt
f4a93ed997
Add a string parameter to kill()
...
Makes the output on the LCD adjustable.
2015-05-20 20:53:48 +02:00
Scott Lahteine
a0f362c735
Simplify & optimize with current_command_args
2015-05-18 07:08:04 -07:00
Scott Lahteine
adc8fcb77f
More parser comments, optimize code_seen, save with goto
2015-05-18 07:08:04 -07:00
Scott Lahteine
c6d8dd19d9
use fetched value
2015-05-18 07:08:04 -07:00
Scott Lahteine
1116e13f5a
Further optimization of command parser
2015-05-18 07:08:03 -07:00
Scott Lahteine
3a4c3ab76e
Pre-sanitize the command before handling
...
- Use a global pointer for the current sanitized command
- Pre-sanitize the current command to bypass `N` and nullify `*`,
removing the need for handlers to bypass, ignore, or nullify these
parts, and reducing overhead for `code_seen`, etc.
- Pre-skip leading whitespace.
- Only look for G, M, T codes at the start of the command.
- Verify that G, M, T codes are followed by command codes.
2015-05-18 07:06:51 -07:00
Scott Lahteine
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
2015-05-17 17:36:32 -07:00
Scott Lahteine
3feaef6526
Have G92 set the nozzle position on Delta and SCARA
2015-05-17 17:08:05 -07:00
Scott Lahteine
6c27eaf864
Merge pull request #2101 from thinkyhead/code_style
...
Code style and a dangling "else"
2015-05-17 03:39:08 -07:00
Scott Lahteine
d580a0d186
Use "+=" in plane rotation
2015-05-17 01:51:14 -07:00
Scott Lahteine
2f3a410cb0
Fix a potential hanging "else" bug
2015-05-17 01:50:30 -07:00
Scott Lahteine
b83e3f0905
Combine "Bed X: " strings
2015-05-17 01:49:52 -07:00
Scott Lahteine
7dfb8becdb
Adjust some names and types in Marlin_main.cpp
2015-05-17 01:48:51 -07:00
Scott Lahteine
c966aa26ff
Comments in Marlin_main.cpp
2015-05-17 01:47:53 -07:00
Scott Lahteine
c54a2ea042
Adjust spacing in Marlin_main.cpp and stepper.*
2015-05-17 01:47:02 -07:00
Scott Lahteine
072625ccad
Update headings in Marlin_main.cpp and stepper.cpp
2015-05-17 01:44:53 -07:00
Scott Lahteine
16032f149f
Rename to codenum as a consistency
2015-05-16 23:17:35 -07:00
Scott Lahteine
273a4a253f
Merge pull request #2096 from thinkyhead/cherry_picking3
...
Hide M117 with no LCD
2015-05-16 21:10:28 -07:00
