Scott Lahteine
05fc3d7891
Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs
2018-04-04 20:53:00 -05:00
Scott Lahteine
be098cd42f
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:47 -05:00
Scott Lahteine
68b9503b96
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 02:17:45 -05:00
Scott Lahteine
cf4e2e507f
Consolidate 3-point leveling point options
2018-03-19 01:55:51 -05:00
Scott Lahteine
f7de05e50c
General spacing cleanup
2018-03-17 16:51:34 -05:00
Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10100 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:41 -05:00
Scott Lahteine
738a8495ad
Improve TMC config organization, naming
2018-03-13 21:43:43 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10068 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:29 -05:00
Scott Lahteine
33b18dc801
Add Z_AFTER_PROBING to example configs
2018-03-11 09:48:03 -05:00
Scott Lahteine
cce80fd41c
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-09 23:11:35 -06:00
Scott Lahteine
a9392c6b27
Set a safe default MINIMUM_STEPPER_PULSE of 2
2018-03-09 03:59:18 -06:00
Scott Lahteine
2d0d5eccd8
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:58:31 -06:00
Scott Lahteine
dc733192be
Add AUTO_REPORT_SD_STATUS to example configs
2018-03-07 00:06:17 -06:00
Scott Lahteine
3cdd2591ed
Update custom boot screen description
2018-03-03 20:10:35 -06:00
Scott Lahteine
8488d64062
Standardize encoder defaults
2018-02-24 22:37:55 -06:00
Scott Lahteine
8c22f9fd4f
Bring some example configs up to speed
2018-02-24 22:00:15 -06:00
Roxy-3D
9e3025e07b
Change Folger Tech i3-2020 defaults...
2018-02-24 10:28:08 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language ( #9785 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:23:35 -06:00
Scott Lahteine
6845f17fb2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:13:03 -06:00
Scott Lahteine
03da273ea6
Fix LCD_PROGRESS bar
...
Fix #9208
2018-02-23 13:59:55 -06:00
Scott Lahteine
235d024505
Add RESTORE_LEVELING_AFTER_G28 to example configs
2018-02-23 12:42:21 -06:00
Sebastianv650
9c65890644
[1.1.x] LIN_ADVANCE v1.5 ( #9700 )
2018-02-23 00:53:41 -06:00
Scott Lahteine
967076b080
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all ( #9756 )
2018-02-21 22:26:56 -06:00
Scott Lahteine
18881e6725
Add 20x4 option for Sainsmart LCD
2018-02-20 20:09:49 -06:00
Scott Lahteine
cc8711419e
Add NUM_RUNOUT_SENSORS to example configs
2018-02-19 06:25:36 -06:00
Scott Lahteine
4813938a87
Update configs for 2.0.x parity
2018-02-18 19:42:20 -06:00
Scott Lahteine
28e7562e7a
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 01:09:51 -06:00
Scott Lahteine
3a1fedaee6
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 15:41:20 -06:00
Bob-the-Kuhn
1647db8fad
Set CONTROLLER_FAN_PIN example to -1
2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements ( #9663 )
...
* UBL - Allow user to control Z-Height correction for off mesh movements
* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
2018-02-15 19:23:01 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... ( #9638 )
...
Will get this duplicated in bugfix_2.0.0 tomorrow...
2018-02-14 17:31:25 -06:00
Scott Lahteine
d89a61bd51
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:56:03 -06:00
Scott Lahteine
4f04f4e6b8
Followup to #9532
2018-02-08 03:39:20 -06:00
jaysonkelly
f8a8711075
I2C position encoders update
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 02:46:12 -06:00
Scott Lahteine
8438a57910
Followup to #9532
2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1
[1.1.x] Enable Z axis and delta sensorless homing ( #9532 )
2018-02-08 02:02:48 -06:00
Scott Lahteine
80946a17ee
Add AUTO_POWER_CONTROL to example configs
2018-02-06 00:20:26 -06:00
Scott Lahteine
527d260581
Add ULTI_CONTROLLER to example configs
2018-02-05 22:24:08 -06:00
Scott Lahteine
ca58084020
Add MALYAN_LCD to configurations
2018-02-04 21:18:42 -06:00
Manuel Valentino
652162777b
[1.1.x] Fixed wrong information about TMC2208 wiring ( #9334 )
2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f
Add TMC software SPI ( #9362 )
2018-02-02 03:56:08 -06:00
Scott Lahteine
3d9f360b5a
Better probe boundaries for linear/grid
2018-01-22 01:10:34 -06:00
Scott Lahteine
957bb3124a
Add thermistor 15 tuned for JGAurora A5
2018-01-21 16:57:47 -06:00
Scott Lahteine
428fbe8228
Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:27:30 -06:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around ( #9227 )
...
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).
This causes the printer to say "Click to resume..."
This is a temporary fix until we figure out the correct way to resolve the issue.
More work needed for G26.
2018-01-17 22:51:19 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 ( #9213 )
...
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4. It also broke G26's
ability to abort in several of its phases.
This is the first pass at fixing the problem. It has been tested for
correctness for several hours but more testing needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.
Some of these changes will need to be moved over to the bugfix-v2.0.0
branch. That will happen a few days from now.
2018-01-17 00:27:50 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE
2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b
Followup to Ender config
2018-01-15 05:48:50 -06:00
Scott Lahteine
8f08e029d8
More up-front option to show SD percentage
2018-01-14 23:30:59 -06:00
