AnHardt
6a6e863a47
Resolve #2581 by adding a missed ';' (PR#67)
2015-08-10 12:51:59 -05:00
RicardoGA
e09ff79635
Update pins_RAMPS_13.h (PR#64)
...
Now all ramps configuration can enable Filament sensor not only EEB
2015-08-10 05:53:01 -05:00
Fourmi
e6aed7bb4e
Update thermistortables for Hisens Thermistor (PR#2588)
2015-08-09 18:11:14 -05:00
Richard Wackerbarth
9d8cc24abf
Continue from the line following the M999 (PR#60)
...
If the printer is going to accept the M999,
then it should continue from that line number.
2015-08-08 08:08:02 -05:00
wurstnase
f3ab1dba54
Z babystepping for coreXY (PR#47)
...
only X and Y were not implemented
2015-08-04 20:10:09 -05:00
Richard Wackerbarth
35afea1c0e
Restore test
...
PR#2572 Changed this because of faulty Boolean Logic
NOT(A OR (NOT B) OR (NOT C)) !=
(NOT A) AND ((NOT B) OR C))
Besides, the compiler should be smart enough to
optimize this without help from the programmer
2015-08-04 15:22:56 -05:00
Richard Wackerbarth
3c7470dbc3
Windows doesn’t have AUTOMATIC VERSIONING yet
2015-08-03 19:34:47 -05:00
Richard Wackerbarth
c54076456b
Merge Overridable Options - Part 12 (PR#39)
2015-08-03 16:05:23 -05:00
Scott Lahteine
6af75f4b5d
Squish down deprecated tests in sanity check
2015-08-03 16:04:48 -05:00
Scott Lahteine
edeb58288e
Use PIN_EXISTS in sanity check
2015-08-03 16:04:48 -05:00
Scott Lahteine
c30b7693e0
Clean up RUMBA pins conditions
2015-08-03 16:04:48 -05:00
Scott Lahteine
46453905d6
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
Richard Wackerbarth
4a72d2ba9c
Merge Support PlatformIO (PR#34)
...
**** NOTE ****
This code is very EXPERIMENTAL and UNSUPPORTED
2015-08-03 15:55:23 -05:00
Richard Wackerbarth
8afd94ed3a
Version Generator for PlatformIO Builds
2015-08-03 10:33:26 -05:00
Richard Wackerbarth
4c2948a8e6
PlatformIO Build Configurations
...
See http://platformio.org/
2015-08-03 10:33:26 -05:00
AnHardt
e3acc84b99
Merge pull request #7 from Wackerbarth/DetailedBuildVersion
...
Provide both long and short version strings
2015-08-03 15:40:54 +02:00
Richard Wackerbarth
b227d8c128
Supply a VERSION in a short form for displays
...
The long descriptor will still be available in M115
2015-08-03 08:21:09 -05:00
Richard Wackerbarth
cd7828a928
This will be the 1.1.0 Release rather than 1.0.3
2015-08-03 08:08:38 -05:00
Richard Wackerbarth
4e2f5618c1
Pick up Default_version when needed
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
329acc852e
Canonize Option flag USE_AUTOMATIC_VERSION
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
a8db0aac32
Automatic Versioning was introduced in 1.6.3
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
5a11d32a85
Move deprecation test to SanityCheck.h
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
7bb7a52940
Bring config up-to-date
2015-08-03 07:35:33 -05:00
Richard Wackerbarth
e66ab97a3c
Merge Bootscreen Text (PR#24)
2015-08-03 07:15:32 -05:00
AnHardt
244ea2014a
Boot-screen for text-displays improvements
...
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
2015-08-03 07:13:00 -05:00
AnHardt
80f2a20842
Enable bootscreen in all Configurations
2015-08-03 07:13:00 -05:00
AnHardt
2684d061ed
Scroll too long strings on bootscreen
2015-08-03 07:13:00 -05:00
AnHardt
4f46df5dab
Make bootscreen configurable for the graphic displays
...
Saves about 473 byte of progmem and 28 bytes of RAM.
2015-08-03 07:13:00 -05:00
AnHardt
09571b7753
Boot-screen for the character displays
...
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
2015-08-03 07:13:00 -05:00
Richard Wackerbarth
866efc14fe
Add Danish translations
2015-08-03 07:06:17 -05:00
Scott Lahteine
267f3479d7
Adjust spacing in pins_RAMPS_13.h
2015-08-02 23:26:58 -05:00
Scott Lahteine
56702e7bb9
Define servo pins just like other pins
2015-08-02 23:26:58 -05:00
Richard Wackerbarth
4b9d5cd352
Use lowercase names for serial instances
2015-08-02 23:01:39 -05:00
Scott Lahteine
1e2deff4fd
Rename BTENABLED to BLUETOOTH
...
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
2015-08-02 22:56:50 -05:00
Scott Lahteine
68055a5959
Include RIGIDBOT_PANEL in Conditionals
2015-08-02 22:26:41 -05:00
Richard Wackerbarth
3cfe1dce1f
Merge Rigidbot Configuration (PR#2579)
2015-08-02 22:14:36 -05:00
George Djabarov
f8ed3a835d
Added comment with the RigidBot Big bed size
2015-08-02 22:13:37 -05:00
George Djabarov
7deae6b6be
Updated RigidBot example configuration
...
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
2015-08-02 22:13:37 -05:00
Richard Wackerbarth
eb65c57496
Merge SD_DETECT_PIN (PR#2569)
2015-08-02 22:11:47 -05:00
Scott Lahteine
5418faa1f9
Add sanity checks for old names
2015-08-02 22:09:08 -05:00
Scott Lahteine
f03e063750
Rename BEEPER to BEEPER_PIN
...
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
2015-08-02 22:09:08 -05:00
Scott Lahteine
270c766de2
SDCARDDETECT -> SD_DETECT, added docs
...
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
2015-08-02 21:59:41 -05:00
Scott Lahteine
496fc28dc3
Tweaks to pins comments
2015-08-02 21:34:13 -05:00
Scott Lahteine
8d3b74cc6e
Rename SDCARDDETECT to SDCARDDETECT_PIN
...
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
2015-08-02 21:34:13 -05:00
Richard Wackerbarth
aa1d38613a
Update README to reflect new repository
2015-08-01 19:34:33 -05:00
Scott Lahteine
0f5ada8cbd
Group the fail case in one negation (PR#2572)
2015-08-01 18:55:50 -05:00
AnHardt
7ddf1cda1d
Improve condition for SERVO_LEVELING (PR#2570)
2015-07-31 22:41:34 -05:00
Richard Wackerbarth
e309fb4bcb
Merge BEEPER_PIN (PR#2564)
2015-07-31 17:14:40 -05:00
Richard Wackerbarth
f32048b8f5
In for a penny, in for a pound
2015-07-31 17:13:53 -05:00
Scott Lahteine
e944f960de
Add a sanity check for old name "BEEPER"
2015-07-31 17:13:53 -05:00
