Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10100 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:41 -05:00
Scott Lahteine
738a8495ad
Improve TMC config organization, naming
2018-03-13 21:43:43 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10068 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:29 -05:00
Scott Lahteine
33b18dc801
Add Z_AFTER_PROBING to example configs
2018-03-11 09:48:03 -05:00
Scott Lahteine
cce80fd41c
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-09 23:11:35 -06:00
Scott Lahteine
a9392c6b27
Set a safe default MINIMUM_STEPPER_PULSE of 2
2018-03-09 03:59:18 -06:00
Scott Lahteine
2d0d5eccd8
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:58:31 -06:00
Scott Lahteine
dc733192be
Add AUTO_REPORT_SD_STATUS to example configs
2018-03-07 00:06:17 -06:00
Scott Lahteine
3cdd2591ed
Update custom boot screen description
2018-03-03 20:10:35 -06:00
Scott Lahteine
8488d64062
Standardize encoder defaults
2018-02-24 22:37:55 -06:00
Scott Lahteine
8c22f9fd4f
Bring some example configs up to speed
2018-02-24 22:00:15 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language ( #9785 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:23:35 -06:00
Scott Lahteine
6845f17fb2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:13:03 -06:00
Scott Lahteine
03da273ea6
Fix LCD_PROGRESS bar
...
Fix #9208
2018-02-23 13:59:55 -06:00
Scott Lahteine
235d024505
Add RESTORE_LEVELING_AFTER_G28 to example configs
2018-02-23 12:42:21 -06:00
Sebastianv650
9c65890644
[1.1.x] LIN_ADVANCE v1.5 ( #9700 )
2018-02-23 00:53:41 -06:00
Scott Lahteine
967076b080
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all ( #9756 )
2018-02-21 22:26:56 -06:00
Scott Lahteine
18881e6725
Add 20x4 option for Sainsmart LCD
2018-02-20 20:09:49 -06:00
Scott Lahteine
cc8711419e
Add NUM_RUNOUT_SENSORS to example configs
2018-02-19 06:25:36 -06:00
Scott Lahteine
4813938a87
Update configs for 2.0.x parity
2018-02-18 19:42:20 -06:00
Scott Lahteine
28e7562e7a
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 01:09:51 -06:00
Scott Lahteine
3a1fedaee6
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 15:41:20 -06:00
Bob-the-Kuhn
1647db8fad
Set CONTROLLER_FAN_PIN example to -1
2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements ( #9663 )
...
* UBL - Allow user to control Z-Height correction for off mesh movements
* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
2018-02-15 19:23:01 -06:00
Scott Lahteine
d89a61bd51
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:56:03 -06:00
Scott Lahteine
4f04f4e6b8
Followup to #9532
2018-02-08 03:39:20 -06:00
jaysonkelly
f8a8711075
I2C position encoders update
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 02:46:12 -06:00
Scott Lahteine
8438a57910
Followup to #9532
2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1
[1.1.x] Enable Z axis and delta sensorless homing ( #9532 )
2018-02-08 02:02:48 -06:00
Scott Lahteine
80946a17ee
Add AUTO_POWER_CONTROL to example configs
2018-02-06 00:20:26 -06:00
Scott Lahteine
527d260581
Add ULTI_CONTROLLER to example configs
2018-02-05 22:24:08 -06:00
Scott Lahteine
ca58084020
Add MALYAN_LCD to configurations
2018-02-04 21:18:42 -06:00
Manuel Valentino
652162777b
[1.1.x] Fixed wrong information about TMC2208 wiring ( #9334 )
2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f
Add TMC software SPI ( #9362 )
2018-02-02 03:56:08 -06:00
Scott Lahteine
3d9f360b5a
Better probe boundaries for linear/grid
2018-01-22 01:10:34 -06:00
Scott Lahteine
957bb3124a
Add thermistor 15 tuned for JGAurora A5
2018-01-21 16:57:47 -06:00
Scott Lahteine
428fbe8228
Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:27:30 -06:00
Scott Lahteine
69c993092b
Followup to Ender config
2018-01-15 05:48:50 -06:00
Scott Lahteine
8f08e029d8
More up-front option to show SD percentage
2018-01-14 23:30:59 -06:00
Scott Lahteine
734fa91e63
Misc config updates
2018-01-14 23:18:45 -06:00
Scott Lahteine
d1ce0bc071
M915 Z Axis Calibration
2018-01-09 18:55:08 -06:00
GMagician
5903b002ac
1.1.x semitec 104NT-4 added ( #9120 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:44 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x
...
[1.1.x] SLIM_LCD_MENUS option
2017-12-31 00:56:10 -06:00
Scott Lahteine
839dd66c3b
Synchronize configs with 2.0.x
2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9
Apply SLIM_LCD_MENUS to example configs
2017-12-30 23:52:53 -06:00
Scott Lahteine
d1cad5afa4
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
2017-12-30 18:22:31 -06:00
Scott Lahteine
00749d8ef0
Add pause/resume action to example configs
2017-12-25 01:28:16 -06:00
Thomas Moore
59d047c1d7
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8864 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-24 23:47:05 -06:00
Scott Lahteine
88c0688961
Reduce default jerk. XY by half. Z by 1/4
2017-12-24 19:49:51 -06:00
