Scott Lahteine
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
2016-06-22 02:45:25 -07:00
Scott Lahteine
88dc543584
Add a macro for XY_TRAVEL_FEEDRATE
2016-06-22 02:23:50 -07:00
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
2016-06-21 01:56:40 -07:00
Scott Lahteine
26a9cd0b08
Move run_z_probe to earlier block
2016-06-21 01:25:23 -07:00
Scott Lahteine
7f8a2025af
Move raise_z_after_probing into earlier block
2016-06-21 01:03:40 -07:00
Scott Lahteine
2530371516
Always disable probe at the end of G29
2016-06-20 16:40:44 -07:00
Scott Lahteine
6aba98e470
Comment on setup_for_endstop_move
2016-06-20 16:40:44 -07:00
Scott Lahteine
04e88d008e
Clear up ordering in G30
2016-06-20 16:40:44 -07:00
Scott Lahteine
ed75b0ea11
Make clean_up function available for probes
2016-06-20 16:28:45 -07:00
Scott Lahteine
51d52cb52a
Make run_z_probe available for any bed probe
2016-06-20 16:02:36 -07:00
Scott Lahteine
f6b09cf465
Always use deploy/stow for dock_sled
2016-06-20 15:51:01 -07:00
Scott Lahteine
3b457c2dd3
Use deploy/stow with FIX_MOUNTED_PROBE too
2016-06-20 15:25:01 -07:00
Scott Lahteine
7e9d4a68d4
Always raise Z (if needed) for servo deploy/stow
2016-06-19 20:17:13 -07:00
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
2fd2301928
FILRUNOUT => FIL_RUNOUT
2016-06-19 19:25:26 -07:00
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
2016-06-19 18:47:27 -07:00
Scott Lahteine
add0032820
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
2016-06-19 18:13:33 -07:00
Scott Lahteine
400e13d136
Output a message for SD read errors
2016-06-19 17:14:56 -07:00
Roxy-3D
96b8bcca84
Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks
...
Cleanup of M48
2016-06-18 22:21:16 -05:00
Scott Lahteine
b7e3c1bbc4
Tweak M48 output conditions
2016-06-18 16:17:53 -07:00
Scott Lahteine
1dad912b03
Adjust M48 raise / move handling
2016-06-18 15:38:24 -07:00
Scott Lahteine
46d3ef2223
Simplify sample_set probe_pt call in M48
2016-06-18 15:38:23 -07:00
Scott Lahteine
a647b05f82
Shrink some debug code in G28
2016-06-18 15:38:23 -07:00
Scott Lahteine
4edf813bde
Just-in-time declaration style in M48
2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya
c475291e19
Fix M851
...
Minor change missing in the process of standardize the gcode M851
2016-06-18 15:19:07 -07:00
Scott Lahteine
4e860babbc
Allow setting xy_travel_speed for delta leveling also
2016-06-18 01:40:49 -07:00
Scott Lahteine
d36d4edd80
Tweak partial homing code
2016-06-18 01:16:50 -07:00
Scott Lahteine
d3a05de96e
Save and restore feedrate in probe functions
2016-06-18 01:16:26 -07:00
Scott Lahteine
defcacc1a9
Delete some obsolete Z servo macros
2016-06-17 18:49:17 -07:00
Scott Lahteine
3a150f07c2
Merge pull request #4073 from thinkyhead/rc_temp_mystery
...
Minor tweaks to M109 / M190
2016-06-17 17:49:50 -07:00
Scott Lahteine
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
2016-06-17 17:32:55 -07:00
Scott Lahteine
692a6e7c91
Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos
...
Remove support for XY servo endstops
2016-06-17 17:32:08 -07:00
Scott Lahteine
de177ba6c9
Minor tweaks to M109 / M190
2016-06-17 17:26:21 -07:00
Scott Lahteine
1000563d80
Make M851 standard with a bed probe
2016-06-17 15:19:42 -07:00
Scott Lahteine
f66a194159
Merge pull request #4062 from jbrazio/bugfix/compiler-warnings
...
Fixes misc gcc warnings
2016-06-17 14:23:28 -07:00
Scott Lahteine
1bed392c68
HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP
2016-06-17 14:20:17 -07:00
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
2016-06-17 14:19:17 -07:00
João Brázio
d1e5dc6319
Fixes misc gcc warnings
2016-06-17 20:24:24 +01:00
Scott Lahteine
ef3bef6b9e
Fix feedrate in gcode_T (max_feedrate is mm/s)
2016-06-16 16:03:14 -07:00
MagoKimbra
008d0637dd
Fix gcode_T
2016-06-16 09:05:36 +02:00
Scott Lahteine
da90bbe0eb
Merge pull request #4010 from thinkyhead/rc_toolchange_adjust
...
Fixup position adjustment on toolchange
2016-06-15 21:10:33 -07:00
Scott Lahteine
4b93989a77
MBL Z adjustment on toolchange
2016-06-15 20:49:36 -07:00
Scott Lahteine
9c800d1f8c
Position adjustment for bed leveling
2016-06-15 20:49:36 -07:00
esenapaj
44f091a413
Fix for the PR #4023(Add macros to move servos)
...
・Add missing ')'
2016-06-15 22:34:55 +09:00
Scott Lahteine
52ac2a62ee
Merge pull request #4013 from thinkyhead/rc_toolchange_no_move
...
Use "Tn S1" to change tools without moving
2016-06-14 20:13:01 -07:00
Scott Lahteine
d2a00b74e3
Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T
...
Use linear feedrate in gcode_T, not volumetric
2016-06-14 20:10:08 -07:00
Scott Lahteine
8d8180e028
Parse M905 args in Marlin_main.cpp
2016-06-13 19:25:28 -07:00
Scott Lahteine
2b340f5acb
patch LIN_ADVANCE to use code_value_float
2016-06-13 18:54:25 -07:00
Scott Lahteine
b708196770
Merge pull request #4032 from AnHardt/bootscreen-delay
...
Show bootscreen later
2016-06-13 18:27:05 -07:00
Scott Lahteine
587de1b6b6
Merge pull request #3676 from thinkyhead/rc_lin_advance_feature
...
Advance extrusion algorithm – LIN_ADVANCE
2016-06-13 18:04:58 -07:00
AnHardt
b4fedec0d1
Show bootscreen later
...
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
2016-06-14 01:59:50 +02:00
Scott Lahteine
4fbe818163
Add macros to move servos
2016-06-12 15:38:30 -07:00
Scott Lahteine
7fb69e24fb
Use "Tn S1" to change tools without moving
2016-06-11 15:58:45 -07:00
Scott Lahteine
b75e648f2c
Clarify names of prepare_move functions
2016-06-11 15:32:49 -07:00
Scott Lahteine
0e2bfd0769
Use linear feedrate in gcode_T, not volumetric
2016-06-10 18:27:01 -07:00
Scott Lahteine
6d62a4ffc8
Patch LIN_ADVANCE for style and forward-compatibility
2016-06-09 21:03:27 -07:00
Sebastianv650
fb8e880734
Add LIN_ADVANCE
2016-06-09 21:03:27 -07:00
Scott Lahteine
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
2016-06-09 20:57:01 -07:00
João Brázio
5b5aa1572b
Non-blocking buzzer
2016-06-09 20:20:05 -07:00
Scott Lahteine
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
2016-06-09 17:04:51 -07:00
Scott Lahteine
cb4704e07a
Rename some planner acceleration vars
...
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
2016-06-09 17:04:50 -07:00
Scott Lahteine
4980ecc1f7
Smaller binary using inline gcode argument getters
2016-06-08 17:03:28 -07:00
Reid Rankin
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
2016-06-08 16:51:10 -07:00
Scott Lahteine
cca047424d
MBL: cel => cell
2016-06-07 19:10:39 -07:00
Scott Lahteine
43947072d5
Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2
...
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-04 15:23:17 -07:00
Scott Lahteine
d7e4e8e9be
Fix a typo in #3955
2016-06-04 02:09:58 -07:00
Scott Lahteine
c2362c1b3c
Apply Marlin coding standards to MBL class
2016-06-03 21:43:32 -07:00
Edward Patel
c06de0f097
MBL: Added keeping MBL active when homing single axises for #3750
2016-06-03 21:42:29 -07:00
Scott Lahteine
f2fb66c00d
With SINGLENOZZLE only set temperature for the active tool
2016-06-03 17:38:03 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
32f8300cc6
Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast
...
Improved LCD contrast handling
2016-06-03 17:08:41 -07:00
Scott Lahteine
4e13cd3f35
Merge pull request #3955 from MagoKimbra/RCBugFix
...
Fix M428 width DELTA & SCARA
2016-06-03 15:50:37 -07:00
Scott Lahteine
8529122af1
Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow
...
Raise the servo probe before stow outside ABL context
2016-06-03 15:45:36 -07:00
MagoKimbra
f499be084a
Fix M428 width DELTA & SCARA
2016-06-03 23:23:23 +02:00
Scott Lahteine
664b299a51
This fix is not DELTA compatible
2016-06-02 17:16:19 -07:00
Scott Lahteine
064efb20e0
Also call clear_command_queue for lcd_sdcard_stop
2016-06-02 17:16:19 -07:00
Scott Lahteine
6277395e1e
set_current_position_from_planner() after stepper.quick_stop()
2016-06-02 17:16:19 -07:00
Scott Lahteine
381bc6f0b0
set_position => set_position_mm
2016-06-02 17:16:19 -07:00
Scott Lahteine
9eecb4404b
Make raise_z_after_probing null sometimes
2016-06-02 16:56:49 -07:00
Scott Lahteine
b3a37b493d
Patch G28 servo stow to use Conditionals, raise_z_after_probing
2016-06-02 16:56:49 -07:00
Scott Lahteine
efa7209acf
Improved LCD contrast handling
...
Based on MarlinFirmware/MarlinDev#200 from @eboston
2016-06-02 16:17:34 -07:00
lrpirlet
3aefa04386
Raise the servo probe before stow outside ABL context
2016-06-01 21:53:45 +02:00
Scott Lahteine
d698c89971
Fix bad movement in gcode_T when switching
2016-05-31 19:14:33 -07:00
Scott Lahteine
1a01a44a94
Merge pull request #3936 from thinkyhead/rc_sav_mk1
...
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 18:46:25 -07:00
Scott Lahteine
bd97bbc52a
Make HAS_LCD_CONTRAST a boolean flag
2016-05-31 11:47:02 -07:00
Scott Lahteine
55ef04a566
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
...
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
2016-05-30 23:35:06 -07:00
Scott Lahteine
360adc6a3b
Small reduction in M421 code
2016-05-23 14:25:42 -07:00
Scott Lahteine
a4ed988c60
Two index finding functions for MBL
2016-05-23 14:25:42 -07:00
Scott Lahteine
cadf441059
Merge pull request #3798 from AnHardt/extend-M421
...
Extend M421 with I and J parameters
2016-05-20 16:17:23 -07:00
AnHardt
f5a036510f
Extend M421 with I and J parameters
...
Extend M421 with I and J parameters
2016-05-21 00:18:09 +02:00
Edward Patel
c7d90dc5ec
Add option to configure G28 all axis resting position for MBL
2016-05-20 11:52:27 -07:00
Scott Lahteine
8218558953
Update comments, rename next_ping_ms, followup to #3797
2016-05-19 16:44:57 -07:00
AnHardt
e761bdbb4b
Remove SF_ARC_FIX from G5 (Cubic B-spline)
...
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
2016-05-19 21:00:12 +02:00
AnHardt
2207001333
No compromises for the manage_heater()
...
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
2016-05-19 20:52:11 +02:00
João Brázio
e6effb8f35
Implements S1 argument in M999
2016-05-19 00:13:33 +01:00
Scott Lahteine
4041508ffb
Function decl. in headers don't need "extern"
2016-05-17 18:35:01 -07:00
Scott Lahteine
d66e53c42b
Merge pull request #3782 from thinkyhead/rc_home_z_before_g29
...
Require homing of Z before G29
2016-05-17 17:53:56 -07:00
Scott Lahteine
552516ddf5
Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup
...
Minor DELTA segmentation speedup
2016-05-17 17:17:38 -07:00
Scott Lahteine
a28970784c
XYZ unhomed
2016-05-17 17:02:53 -07:00
Scott Lahteine
a9926b71a4
Require homing of Z before G29
2016-05-17 16:57:12 -07:00
AnHardt
41e9569dbc
Minor DELTA segmentation speedup
...
Minor DELTA segmentation speedup by pulling calculations out of the loop.
2016-05-18 01:49:30 +02:00
Scott Lahteine
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
2016-05-17 13:57:38 -07:00
Scott Lahteine
d0ac4541d3
Merge pull request #3775 from jbrazio/bugfix/followup-3770
...
G29: Report final position back to host when using MBL
2016-05-17 13:55:26 -07:00
João Brázio
b6a3aef297
G29: Report final position back to host when using MBL
2016-05-17 01:27:59 +01:00
esenapaj
95f30529a6
Add stowing process for MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
esenapaj
e2b87f6c85
Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
Scott Lahteine
754b0152f5
Fix MBL zigzag calls
2016-05-15 12:35:01 -07:00
Scott Lahteine
13175ce7da
Fix error checking in M421
2016-05-14 17:12:44 -07:00
João Brázio
8a18c52002
Adds an option to disable print job timer auto start
2016-05-14 15:22:44 -07:00
João Brázio
a79267217b
M78 now allows stats reset using the S78 argument
2016-05-14 15:22:44 -07:00
Scott Lahteine
a713043acd
Merge pull request #3749 from esenapaj/patch-3
...
Enclose all #error strings by double-quotes
2016-05-14 15:01:56 -07:00
Scott Lahteine
3cfea3ff12
Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE
...
G29 missing FIX_MOUNTED_PROBE condition
2016-05-14 15:00:42 -07:00
Scott Lahteine
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
2016-05-14 14:52:08 -07:00
AnHardt
8a4376d51f
Idle during long arcs
...
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
2016-05-14 00:29:13 +02:00
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
2016-05-13 21:10:23 +09:00
AnHardt
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
2016-05-13 13:27:45 +02:00
AnHardt
aef2559bd8
fix-FIX_MOUNTED_PROBE
...
Add a forgotten condition
2016-05-13 12:07:17 +02:00
Scott Lahteine
aaeadf0cbd
If no "B" parameter given, get 1 byte
2016-05-11 15:30:08 -07:00
Scott Lahteine
a6d594665b
Print an error on bad i2c request
...
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
2016-05-11 15:30:02 -07:00
Scott Lahteine
56dd31ea3c
Use code_value_long for potentially large values
...
Addressing #3711
2016-05-10 09:15:31 -07:00
Scott Lahteine
96b71e62c0
Fix dipping on DELTA robots during G29
...
- Addressing #3689 , et. al.
2016-05-08 18:28:46 -07:00
Scott Lahteine
15fc93d742
Cleanup and consolidate probe conditionals for clarity
2016-05-08 12:59:43 -07:00
Scott Lahteine
084f6b5b44
Temperature singleton class
2016-05-04 19:42:12 -07:00
esenapaj
605808fe37
Additional follow-up the PR #3631(Encapsulate S...
...
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.
・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.
・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
2016-05-03 18:28:37 +09:00
esenapaj
a82cfcff2d
Follow-up the PR #3631(Encapsulate Stepper, ...
...
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).
movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
2016-05-02 22:04:26 +09:00
Scott Lahteine
462a8a951e
A little extra gcode_T spacing
2016-04-30 17:26:50 -07:00
Scott Lahteine
96f51f400f
Planner singleton class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5076d12344
Localize M119 in Endstops class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8
Stepper and Endstops as singleton objects
2016-04-30 17:26:50 -07:00
Scott Lahteine
6d3e4e1f8f
Prevent stuck M109/M190 when target is changed
2016-04-30 17:03:54 -07:00
Scott Lahteine
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
2016-04-29 15:31:14 -07:00
João Brázio
1491d682fb
Miscellaneous tweaks on PrintCounter
2016-04-29 23:13:59 +01:00
João Brázio
d6cfcc9c8b
Added new G-Code: M78
2016-04-29 23:13:58 +01:00
Scott Lahteine
f4706bb90e
Keepalive not needed while waiting for temperatures
2016-04-28 21:11:15 -07:00
Blue-Marlin
e58e281473
Fix feedrate after toolchange
...
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
2016-04-27 00:57:45 +02:00
Scott Lahteine
ec82e1e05d
Merge pull request #3616 from thinkyhead/rc_fixup_some_movement
...
General cleanup around high level move functions
2016-04-25 20:23:38 -07:00
Scott Lahteine
abeab792cb
General cleanup around high level move functions
...
- Use new `DEBUG_POS` macro for `DELTA` debug
- Neaten up `prepare_move` a smidgen
- Remove an old commented `prepare_move()` line
2016-04-25 20:02:24 -07:00
Scott Lahteine
68d0347e67
Call report_current_position after M206 / M428
2016-04-25 18:43:28 -07:00
Scott Lahteine
dcb4cdaa9e
Call report_current_position instead of gcode_M114 directly
2016-04-25 18:43:27 -07:00
gralco
840e13f664
Introduce M108 cancel heatup for the hotend and bed
...
This G-code is asynchronously handled in the get_serial_commands() parser.
2016-04-25 08:33:33 -06:00
João Brázio
a901555da4
Moved G29 debug output before matrix.set_to_identity()
2016-04-22 20:57:22 -07:00
Scott Lahteine
1caa2628da
Use sync_plan_position_e function elsewhere
2016-04-20 13:02:19 -07:00
Scott Lahteine
c7df961144
Fix G92 so it only sets the plan position once
2016-04-20 13:01:58 -07:00
Scott Lahteine
3db5a75f30
Merge pull request #3568 from thinkyhead/rc_various_fixes
...
General code cleanup, improved naming, etc.
2016-04-19 20:53:38 -07:00
Scott Lahteine
ac69fad96d
lowercase "stop" function
2016-04-19 19:43:54 -07:00
Scott Lahteine
39ee9c526b
setTargetedHotend => get_target_extruder_from_command
2016-04-19 19:43:54 -07:00
Scott Lahteine
cafa8b8ce3
Rename filament runout items
2016-04-19 19:43:39 -07:00
Scott Lahteine
27b2e2e786
Document some variables
2016-04-19 19:43:39 -07:00
Scott Lahteine
a4062a47ac
Rename baricuda variables
2016-04-19 19:43:38 -07:00
Scott Lahteine
78747b1328
min_pos/max_pos => sw_endstop_min/sw_endstop_max
2016-04-19 19:43:38 -07:00
Scott Lahteine
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
2016-04-19 18:09:29 -07:00
Scott Lahteine
a26d70e932
Apply indentation to gcode_M303, PID_autotune
2016-04-18 19:04:45 -07:00
Scott Lahteine
ba66336503
Output error for disabled M303
2016-04-18 19:03:45 -07:00
Scott Lahteine
5905ec5ba8
Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift
...
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 17:20:02 -07:00
Jeff K
90c49f5a14
Fixed invalid addressing (overflow) of position_shift / software endstops
...
Signed-off-by: Jeff K
2016-04-17 19:28:50 -04:00
Scott Lahteine
c242bee449
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 00:12:46 -07:00
Scott Lahteine
837df6108c
Fix borked set_bed_level_equation_lsq
2016-04-16 20:35:42 -07:00
Scott Lahteine
4b75b11a53
Wrap defines in parentheses in configs, M48
2016-04-16 18:21:09 -07:00
Scott Lahteine
234987ee2f
Fix MBL lift
2016-04-16 14:17:06 -07:00
Scott Lahteine
e0830bf8f1
Don't use LCD alert unless error or alert level is reset later
2016-04-15 18:48:49 -07:00
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
esenapaj
5ecd75eeb3
Fix for PR #3502(General cleanup of arc code)
2016-04-16 07:22:07 +09:00
gralco
8ec8d59df8
Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME
2016-04-15 11:20:32 -06:00
Scott Lahteine
6e52b0b723
Merge pull request #3504 from thinkyhead/rc_fix_debugging
...
Fix debugging of vector_3
2016-04-14 19:08:30 -07:00
Scott Lahteine
88367a37f7
Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits
...
Relating current_position, min_pos, max_pos, and home_offset
2016-04-14 18:50:43 -07:00
Scott Lahteine
b20bf1826d
Fix debugging of vector_3
2016-04-14 18:45:26 -07:00
Scott Lahteine
b243844690
Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs
...
General cleanup of arc code
2016-04-14 18:19:44 -07:00
Scott Lahteine
2129db581e
Simplify MBL movement, zigzag
2016-04-14 16:58:42 -07:00
Scott Lahteine
0493fccc0b
mbl.active is a bool now
2016-04-14 16:58:42 -07:00
Scott Lahteine
8e5099fa0c
Update software endstop positions with M206, M428, G92, etc.
2016-04-14 16:47:22 -07:00
Scott Lahteine
5cfb2533d6
Initial cleaning up of arc code
2016-04-14 16:43:49 -07:00
Scott Lahteine
9ce4264fda
Merge pull request #3490 from thinkyhead/rc_mbl_adjustments
...
Document some movement functions, rename a local
2016-04-13 20:55:20 -07:00
esenapaj
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:34:12 -07:00
Scott Lahteine
cfcd3d7b3e
Rename z_offset local to zoffset
2016-04-13 20:09:20 -07:00
Scott Lahteine
5fd20ecac3
Comments on some movement functions
2016-04-13 20:09:20 -07:00
Scott Lahteine
a781a6f955
Apply esenapaj 3479 and delta/scara position bugfix
2016-04-13 17:41:20 -07:00
Scott Lahteine
525d8256d4
Merge pull request #3481 from thinkyhead/rc_extruder_offset_array
...
Fix: gcode_T using non-existent Z offset
2016-04-12 18:23:08 -07:00
Scott Lahteine
46881c846c
Add comments for extruder offset options
2016-04-12 17:16:58 -07:00
Scott Lahteine
edf376ce0d
Fix: gcode_T using non-existent Z offset
...
As noted by @snowzach in #3461
2016-04-12 17:15:10 -07:00
gralco
178aeb79c8
Implementation of M190 bed temp hysteresis
2016-04-12 08:56:14 -06:00
Scott Lahteine
0439483bc8
Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t
...
Add DEBUG_LEVELING output for gcode_T
2016-04-11 21:03:15 -07:00
Scott Lahteine
63d8893f5d
Add DEBUG_LEVELING output for gcode_T
2016-04-11 20:45:10 -07:00
Scott Lahteine
f840c7de4d
Initialize stepper counts for Delta/SCARA
2016-04-11 19:02:35 -07:00
Scott Lahteine
56acaf3594
Merge pull request #3469 from thinkyhead/rc_aleph_cooldownfix
...
Fix for M109 and M190 cooldown
2016-04-11 18:01:01 -07:00
gralco
c218db136a
Fix for M109 and M190 cooldown
...
Also removes the re-definition of now inside M190's while loop
2016-04-11 17:12:23 -07:00
Scott Lahteine
c5a2ce4366
Merge pull request #3446 from thinkyhead/rc_fixup_M206_and_mesh
...
Fix home_offset handling and account for it in G29
2016-04-11 16:49:01 -07:00
Scott Lahteine
b1bb1c7989
Merge pull request #3466 from thinkyhead/rc_look_for_leveling_bug
...
Add CORE support to st_set_position and plan_set_position
2016-04-11 16:45:00 -07:00
Scott Lahteine
fdee2be49c
More logging of matrix behavior
2016-04-11 00:06:33 -07:00
Scott Lahteine
7f265db3ef
Move sync_plan_position after DEBUG_LEVELING
2016-04-10 23:40:11 -07:00
Scott Lahteine
02550af7c3
Merge pull request #3453 from thinkyhead/rc_jbrazio_m190
...
ELAPSED / PENDING for rollover-safe time checking
2016-04-10 20:25:02 -07:00
Scott Lahteine
803845ec18
Add a case for M113 to process_next_command
2016-04-10 18:53:03 -07:00
Scott Lahteine
386140f361
Test time difference in safe way
2016-04-10 18:09:31 -07:00
Scott Lahteine
1b7356b3a1
Account for home_offset in G29 handler
2016-04-10 15:35:02 -07:00
Scott Lahteine
f3562dd895
Have M206 alter current_position, M428 use new function
2016-04-10 15:35:01 -07:00
Scott Lahteine
6d465321b5
Adjust timeout code in host_keepalive
2016-04-09 16:58:17 -07:00
Scott Lahteine
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
2016-04-08 21:45:45 -07:00
Scott Lahteine
1acf901b63
Adjustments to residency_start_ms handling
2016-04-08 21:20:23 -07:00
gralco
907aed57db
Fix bug which can cause an infinite M109 loop
...
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.
Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
2016-04-08 21:20:23 -07:00
jbrazio
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
2016-04-08 20:14:37 -07:00
Scott Lahteine
843aa90b5a
Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
...
Additional debug leveling output
2016-04-08 18:57:18 -07:00
Scott Lahteine
a644ab1de4
Minor patch ups to G29
...
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
2016-04-08 17:53:15 -07:00
Scott Lahteine
cba2698871
Additional DEBUG_LEVELING output
2016-04-08 17:53:15 -07:00
Scott Lahteine
5e18d650c4
Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
...
No casting needed for SERIAL_ECHOPAIR
2016-04-07 19:29:18 -07:00
Scott Lahteine
e0b0d1eb6b
Add M113 to get/set Host Keepalive
2016-04-07 19:25:56 -07:00
Scott Lahteine
85883da90c
Implement basic HOST_KEEPALIVE_INTERVAL
2016-04-07 19:25:56 -07:00
Scott Lahteine
098fb8f8c9
Merge pull request #3413 from thinkyhead/rc_probe_G30_position
...
Report the probe position in G30
2016-04-07 19:25:33 -07:00
Scott Lahteine
c9c7c66b95
Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
...
M109: Protect against EXTRUDE_MINTEMP expansion
2016-04-07 19:18:34 -07:00
Scott Lahteine
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
2016-04-07 19:18:03 -07:00
Scott Lahteine
dc19b69697
No casting needed for SERIAL_ECHOPAIR
2016-04-07 16:33:21 -07:00
João Brázio
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion
2016-04-07 12:50:57 +01:00
João Brázio
7c7e30f4cc
Adherence to the new OOP coding standards
2016-04-07 12:41:09 +01:00
Scott Lahteine
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
2016-04-06 19:48:04 -07:00
Scott Lahteine
2f6c5fe2da
Report the probe position in G30
2016-04-06 16:55:21 -07:00
João Brázio
e48d0263bf
Bugfix: M32 was still using the old print timer
2016-04-06 04:41:36 +01:00
João Brázio
e8b80d8c20
Implemented M75, M76, M77 to control the print timer
2016-04-06 04:38:42 +01:00
João Brázio
eb61051556
Rework the print job timer to use the stopwatch class
2016-04-06 04:34:03 +01:00
Scott Lahteine
98f2e9fc83
Reduce string storage required for DEBUG_LEVELING
2016-04-05 19:04:42 -07:00
Scott Lahteine
1af5d7b35f
Add more leveling-debug output
2016-04-05 18:31:10 -07:00
Scott Lahteine
56e8e2b0eb
Final tweaks to M111 output
2016-04-04 15:36:07 -07:00
João Brázio
d819a4aff9
Fixes #3346 , followup #3343 : variables must defined with the static keyword to work with PROGMEM when defined inside functions
2016-04-04 15:02:18 +01:00
Scott Lahteine
de39056f68
Merge pull request #3343 from thinkyhead/rc_fix_m111_output
...
Fix M111 output using pgm_read_word, as required
2016-04-03 17:44:38 -07:00
Scott Lahteine
fd0ac371b0
Fix M111 output using pgm_read_word as required
...
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
2016-04-03 17:33:06 -07:00
Scott Lahteine
d771174797
Merge pull request #3337 from esenapaj/patch-2
...
suppress warnings
2016-04-03 17:01:22 -07:00
Scott Lahteine
d24f14a799
Add HAS_TEMP_HOTEND define
2016-04-03 16:18:49 -07:00
esenapaj
f9e1a0ee6c
suppress warnings
2016-04-04 06:48:53 +09:00
Scott Lahteine
80b8fd1cad
Add MSG_HOME_OFFSETS_APPLIED
2016-04-02 18:14:49 -07:00
Scott Lahteine
bc86ee0271
Simplify homeaxis
with some macros
2016-03-30 18:44:05 -07:00
Scott Lahteine
82ef101ed5
Deploy & Stow in G29 for Delta + Z Servo Endstop
2016-03-30 16:41:16 -07:00
Scott Lahteine
de333c4fea
Merge pull request #3279 from thinkyhead/rc_filament_width_sensor
...
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-30 12:16:27 -07:00
Scott Lahteine
8def2c31db
Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0
...
Fix temperature checking conditions (backwards!)
2016-03-30 12:10:39 -07:00
Scott Lahteine
8bf5f7c676
Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start
...
M104 not starting the print timer
2016-03-30 11:54:16 -07:00
Scott Lahteine
31450ad498
Fix temperature checking conditions (backwards!)
2016-03-30 11:52:03 -07:00
João Brázio
187c183c20
M104 was not starting the print timer
2016-03-30 11:33:24 +01:00
Scott Lahteine
507aef055f
Patch broken M404
2016-03-29 20:54:31 -07:00
Scott Lahteine
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-29 20:54:31 -07:00
Scott Lahteine
5f32184254
Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo
...
Echo all debug levels in M111, default to DEBUG_NONE
2016-03-29 20:34:31 -07:00
Scott Lahteine
05765fb570
Add DEBUGGING macro
2016-03-29 19:50:01 -07:00
Scott Lahteine
4402760739
Echo all debug levels in M111, default to DEBUG_NONE
...
Redo of #3268 by @jbrazio
2016-03-29 19:18:45 -07:00
Scott Lahteine
f0b96f5cae
Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth
...
Refinements, fixes, reduced stack usage in CardReader
2016-03-29 18:30:18 -07:00
Scott Lahteine
12c0bf9521
Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached
...
M190 bed temp is never reached
2016-03-29 18:28:51 -07:00
João Brázio
c6577aea60
M190 bed temp was never reached
2016-03-30 01:03:20 +01:00
Scott Lahteine
27d70599d4
Change openFile default to "not-push" instead of "do-replace"
2016-03-29 03:16:35 -07:00
Scott Lahteine
3252df7998
Minor cleanup to filament sensor code
2016-03-28 20:04:34 -07:00
Scott Lahteine
0b8ef5eba6
Split get_command into units, rename to get_available_commands
2016-03-28 06:00:04 -07:00
Scott Lahteine
545f7997ea
Continue on empty lines instead of returning
2016-03-28 05:37:36 -07:00
Scott Lahteine
3dcf6d42ff
Don't store escaped serial characters if comment_mode
2016-03-28 05:37:36 -07:00
Scott Lahteine
5f8e52aefb
Minor cleanup to command dispatcher
2016-03-28 05:37:36 -07:00
Scott Lahteine
f1ed310322
Add NUMERIC compare macros to simplify code
2016-03-28 03:52:49 -07:00
jbrazio
443e6d26fe
Formatted multi-line comments
2016-03-27 04:36:36 +01:00
Scott Lahteine
e4039a9b5b
Merge pull request #3250 from esenapaj/patch-1
...
Fix typo
2016-03-26 00:41:31 -07:00
Scott Lahteine
cd4c3e90bc
Send a busy signal every 10 seconds instead of every 2
2016-03-25 22:15:40 -07:00
Scott Lahteine
26168676e7
Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames
...
Fix: current_command_args skips digits at the front
2016-03-25 16:38:36 -07:00
esenapaj
f54315c728
Fix typo
...
These are salvaged from closed-PR #3216 .
2016-03-26 08:37:17 +09:00
Scott Lahteine
f423716c6a
Fix: current_command_args skips digits at the front
...
Closes #3245
2016-03-25 16:12:41 -07:00
Scott Lahteine
18de9f55ac
Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes
...
Updated Mesh Bed Leveling
2016-03-25 06:48:12 -07:00
Scott Lahteine
3a1e6b1752
Merge pull request #3243 from AnHardt/homed
...
axis_known_position -> axis_homed
2016-03-25 06:36:46 -07:00
AnHardt
94962ee678
axis_known_position -> axis_homed
...
In all these cases we want the axis to be homed. If we could have lost
some steps is secondary.
Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
2016-03-25 14:05:20 +01:00
Edward Patel
14afe1a017
Move to Z=0 for G28 when using Manual Bed Leveling
...
copy of 406992f9dd
2016-03-25 04:58:44 -07:00
Edward Patel
c606ed447a
Add "G29 S4" to fine tune Z level for Mesh Bed Leveling.
...
Also add mbl.z_offset to the EEPROM, bumping the version to V23.
2016-03-25 04:58:43 -07:00
Scott Lahteine
5d8036e554
Code cleanup around MOTOR_CURRENT_PWM options
2016-03-25 04:23:46 -07:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
Scott Lahteine
4823791eb0
Merge pull request #3228 from esenapaj/patch-1
...
Fix spelling
2016-03-25 00:40:51 -07:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
esenapaj
89a845659a
Fix spelling
...
PROBABLE ->PROBEABLE
This is follow-up to #3069 ?
2016-03-25 02:13:37 +09:00
Scott Lahteine
af32a7d5d6
M120/M121 also set endstops non-homing state
2016-03-24 03:24:23 -07:00
Scott Lahteine
04fa9d4f47
Make Autotune options into Menu Edit Items
2016-03-24 02:00:08 -07:00
WPBack
e3f583a3be
Fixes for PID AutoTune from menu
...
Fixes for #3189
Setting a temp is still missing
2016-03-24 01:47:30 -07:00
WPBack
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
...
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
2016-03-24 01:46:37 -07:00
Scott Lahteine
c5857f96c8
Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
...
Add support for Printrboard RevF
2016-03-24 00:12:06 -07:00
Scott Lahteine
f774420488
Merge pull request #3196 from thinkyhead/rc_controllerfan_bug
...
Make DISABLE_INACTIVE_X, etc., true if missing
2016-03-24 00:11:46 -07:00
AnHardt
1c6a16d5bb
Send position updates to RH
...
Send position updates to RH where RH can not know the end position.
For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
2016-03-23 13:30:50 +01:00
AnHardt
6486e8b74a
Call buzz() directly from M428
2016-03-22 15:05:04 +01:00
Scott Lahteine
b1a3a95ad4
Tweak controllerFan to save a cycle or two
2016-03-20 22:11:09 -07:00
Scott Lahteine
10caee2b7c
Merge pull request #3187 from AnHardt/target_extruder_number
...
Fix extrudernum in MSG_INVALID_EXTRUDER
2016-03-20 17:15:22 -07:00
Scott Lahteine
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
...
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
2016-03-20 17:10:38 -07:00
Scott Lahteine
7bf5d117e7
Merge pull request #3069 from thinkyhead/rc_delta_compat_m48
...
Delta-compatible extensions to M48
2016-03-20 17:09:18 -07:00
Scott Lahteine
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
...
Stop print timer with M105/M109
2016-03-20 17:05:07 -07:00
AnHardt
338b69c24b
Fix extrudernum in MSG_INVALID_EXTRUDER
...
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
2016-03-20 11:39:06 +01:00
AnHardt
b39b54031b
Fix KEEPALIVE_STATE
...
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER
Add Travis test for FILAMENTCHANGEENABLE
2016-03-20 10:41:56 +01:00
Scott Lahteine
41145e6e81
Patch drain_queued_commands_P
...
Fix a SNAFU that should have been caught in #3012
2016-03-19 20:10:41 -07:00
Scott Lahteine
59483221d5
Move stepper DAC to a separate file
2016-03-19 19:24:26 -07:00
Scott Lahteine
5d0570cea0
Make digitalPotWrite depend on HAS_DIGIPOTSS
2016-03-19 19:24:26 -07:00
Scott Lahteine
f96bc03081
Add M907-M910 g-codes support for Printrbot Rev. F
2016-03-19 19:24:26 -07:00
Scott Lahteine
cf7c444aff
Apply unknown_position_error elsewhere
2016-03-19 05:13:40 -07:00
Scott Lahteine
eda5190581
Check for known position in M48
2016-03-19 05:13:40 -07:00
Scott Lahteine
68085ca855
Updated M48 friendly for DELTA
...
Partial implementation with reference to MarlinFirmware/Marlin#3011
2016-03-19 05:13:40 -07:00
Scott Lahteine
38b0082bf2
Additional tweaks to M42 exit conditions
2016-03-19 03:10:18 -07:00
Scott Lahteine
4bbea5124d
Support for multiple PWM fans
2016-03-19 03:10:18 -07:00
Scott Lahteine
637cc03686
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
2016-03-19 03:00:58 -07:00
AnHardt
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
2016-03-19 02:00:08 -07:00
Scott Lahteine
4634feaeab
Merge pull request #3012 from thinkyhead/fix_command_injection
...
Use a serial line buffer to prevent queue corruption
2016-03-19 01:43:54 -07:00
Scott Lahteine
963a92ceda
Patch idle forevermore
2016-03-18 22:38:35 -07:00
Scott Lahteine
7ec7bb31c4
Send a Busy signal to hosts during long processes, wait for input, etc
...
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
2016-03-18 22:38:35 -07:00
Scott Lahteine
80277cc9c8
drain_queued_commands_P now returns true if there are more
2016-03-18 17:56:48 -07:00
Scott Lahteine
8fe7420310
Use a separate serial line buffer
2016-03-18 16:46:20 -07:00
Scott Lahteine
7d25c107a8
Merge pull request #3149 from esenapaj/patch-1
...
suppress warnings
2016-03-18 15:40:14 -07:00
Scott Lahteine
e8fa843c2d
Merge pull request #3164 from epatel/epatel/RCBugFix
...
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
2016-03-16 02:40:54 -07:00
Scott Lahteine
d7c6fd5c2f
Merge pull request #3146 from thinkyhead/rc_enabled_true_false
...
Support "true" and "false" in the ENABLED macro
2016-03-15 17:35:55 -07:00
Edward Patel
cb0dbfa3b5
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
2016-03-16 01:26:00 +01:00