Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
2018-03-21 19:30:06 -05:00
Roxy-3D
c3c264978f
correct truncated comment
2018-03-21 16:54:45 -05:00
Scott Lahteine
bc45fb6b13
Tweak use of move_z_after_probing
2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882
Allow no raise after run_z_probe in probe_pt
2018-03-21 01:24:51 -05:00
Scott Lahteine
ae39fbd646
Also suppress keepalive with suspend_auto_report
2018-03-21 00:29:09 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 04:11:46 -05:00
Scott Lahteine
c0d694d5d3
Squash UBL postscript comment
2018-03-18 18:58:10 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
2018-03-11 10:20:50 -05:00
Scott Lahteine
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
2018-03-10 06:57:31 -06:00
Roxy-3D
26dc594ebb
prevent steppers from turning off during manual probes
2018-03-10 00:15:41 -06:00
Scott Lahteine
ca577c1638
Fix up various spacing, comments, and typos
2018-03-07 21:09:08 -06:00
Scott Lahteine
9515e5aefb
Fix LA_active_extruder (static)
2018-03-07 05:49:20 -06:00
Scott Lahteine
1d604be671
Suspend auto-report during UBL map output
2018-03-07 02:00:19 -06:00
Scott Lahteine
2057177184
Make enums into implicit char
2018-03-06 23:39:56 -06:00
Scott Lahteine
24b9c1923f
ubl G29 tweaks
2018-02-28 03:40:06 -06:00
Scott Lahteine
7bdb98c946
Fix #9826 . Solution by @gloomyandy
2018-02-26 15:02:19 -06:00
Roxy-3D
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
2018-02-25 23:50:44 -06:00
Scott Lahteine
966d9af98a
Mesh export in Bilinear + UBL M503
2018-02-25 23:25:39 -06:00
Scott Lahteine
2228dff3ea
ubl.h compile flags from 1.1.x
2018-02-25 23:03:08 -06:00
Scott Lahteine
f3dbe19669
Tweaks to HAL codestyle
2018-02-25 04:38:17 -06:00
Roxy-3D
d504bbbfa4
Fix botched check for being off the mesh...
2018-02-21 14:28:58 -06:00
Scott Lahteine
241e55ef3b
Apply SERIAL_FLUSH macro
2018-02-16 17:32:12 -06:00
Scott Lahteine
304e0f8945
Followup to 21e60fd
...
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
2018-02-15 22:24:23 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
2018-02-15 15:07:42 -06:00
Scott Lahteine
8d71ad37cb
flush comment to match 1.1.x
2018-02-14 02:56:18 -06:00
Scott Lahteine
89165326b4
Cleanup after vim and vigor
2018-02-11 06:07:30 -06:00
Scott Lahteine
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
2018-02-05 19:08:27 -06:00
Scott Lahteine
e5ee0b6f6c
Implement MALYAN_LCD
2018-02-04 18:52:44 -06:00
Scott Lahteine
2bea1bda56
Move more strings to PROGMEM
2018-01-24 00:06:06 -06:00
Scott Lahteine
1dcfe193ac
Optimize some serial strings
2018-01-23 19:14:00 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
2018-01-18 19:57:18 -06:00
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
2018-01-16 18:00:57 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
2018-01-16 11:08:00 -06:00
Thomas Moore
f7efac57b7
Multi-host support
2018-01-10 00:14:47 -06:00
Scott Lahteine
60d07f20e7
Make mbl.has_mesh() a method
2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89
Move MBL functions into the class
2018-01-07 00:13:36 -06:00
Scott Lahteine
e89f1453ab
UBL G29 works without settings.load()
2018-01-05 15:48:34 -06:00
Scott Lahteine
4ef965cc40
Fix compiler warnings
2017-12-25 08:53:01 -06:00
Scott Lahteine
4b49ea1e92
General cleanup of config-store, reset_bed_level
2017-12-25 05:16:01 -06:00
Scott Lahteine
705ea98fd3
Comment return false in motion functions
2017-12-24 22:57:15 -06:00
Scott Lahteine
caa5093498
General DELTA_IK macro
2017-12-21 22:41:57 -06:00
Scott Lahteine
d568e586b7
Fix up ubl_motion indentation
2017-12-11 03:08:45 -06:00
Scott Lahteine
6d0678d963
Omit unused UBL motion code
2017-12-11 03:08:18 -06:00
Scott Lahteine
3255712343
Skew Correction for UBL
...
Also remove unused grid slicing function when using UBL segmented.
2017-12-11 03:08:15 -06:00
Scott Lahteine
3d796d8040
Move debug code
2017-12-11 00:27:06 -06:00
Scott Lahteine
3db5303bfe
_buffer_line => buffer_segment
2017-12-11 00:27:06 -06:00
Scott Lahteine
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
2017-12-11 00:27:06 -06:00
