galexander1
d4880a9e60
Revert "Move Sd library out into library"
2015-01-15 18:52:10 -05:00
odewdney
cf50c0eff8
Arduino.h case sensitive include
2015-01-13 14:30:28 +00:00
odewdney
f84ff4ba7d
Move SD Fat library out of main src
2015-01-13 13:31:55 +00:00
odewdney
9d9c859ac1
First move of SdFat library
2015-01-13 08:04:32 +00:00
Bo Herrmannsen
b17b8583af
adding hardware files for OMC
...
for ide 1.0.6
2014-12-17 23:01:30 +01:00
Bo Herrmannsen
341c7d080d
Merge pull request #996 from cbane/arduino-1.5
...
Add Arduino add-ons for Arduino 1.5
2014-12-17 21:46:18 +01:00
Bo Herrmannsen
3ac8bd8de7
Merge pull request #1013 from mattrobbo10/Marlin_v1
...
Proposing adding gen7-dist from gen7 electronics repo - marlin now compiles for gen7
2014-12-17 21:21:18 +01:00
Bo Herrmannsen
1ba7c31395
Adding Melzi board
...
these are the files needed to support the Melzi board
2014-12-04 23:45:51 +01:00
mattrobbo10
89abf07faa
Added gen7-dist - marlin now compiles for gen7
2014-07-18 18:04:27 +10:00
Courtney Bane
253cf0f427
Add Arduino additions for Arduino 1.5.x.
2014-07-03 18:51:52 -05:00
Ronald
c2b3e88787
Changed 1284p fuse setting for Arduino_1.x.x
...
- Remove the two version of 16mHz. Crystal and resonator use the same
fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a
board option.
- Added 20Mhz board option.
Symptoms for incorrect fuse setting:
- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.
Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
2014-02-03 15:35:23 +00:00
Ronald
f303129fb6
Changed 1284p fuse setting for 8, 16 and 20 Mhz
...
Symtopns:
- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.
Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
2014-02-02 13:13:15 +00:00
whosawhatsis
28aca76c4d
Group hardware files for Arduino 1.x.x into hardware folder
2014-02-01 12:22:37 -08:00
hcker2000
ad588e8990
Added new board for those of us with sanguinololu boards with ceramic resonators
2013-11-18 15:49:36 -05:00
Steve Kelly
d7b1a8ba33
add rambo arduino addons
2013-08-03 12:42:34 -05:00
ellensp
e019197b32
renamed ArduinoAddons/Arduino_1.x.x/sanguino to Sanguino. Now make works for Arduino > 1.0 on linux
2013-07-27 00:13:49 +12:00
Scott Lahteine
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
...
Also cosmetic comment changes and spelling corrections in printed
messages
2013-05-02 09:22:58 -07:00
MaikStohn
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
2013-04-16 13:54:39 +02:00
MaikStohn
c83863d5d6
add U8glib library to Arduino1.x includes
2013-04-16 12:44:54 +02:00
Dirk Eichel
c28e71a1bf
Reduced u8glib SPI speed to fosc/8
...
Makes the lib compatible with most LCDs
2013-03-19 19:50:08 +01:00
Dirk Eichel
ee8feb9dee
Add Marlin (reprap) specific fonts 6x10, 6x9
...
Font size 6x10 with feedrate symbol & Font size 6x9.
2013-03-19 19:45:57 +01:00
Dirk Eichel
c8e2f44087
Add u8glib library supporting dot matrix displays
...
https://code.google.com/p/u8glib/
Universal Graphics Library for 8 Bit Embedded Systems
2013-03-19 19:41:23 +01:00
Dirk Eichel
f991bf23b2
Add bootloader files for ATmega1284/Sanguino
...
Added the optiboot bootloader, uses only 512kB of FLASH
Includes .hex file is for 20MHz µC Clock and serial speed of 57k6
2013-02-27 22:34:36 +01:00
Dirk Eichel
5bfba7720e
Switched to Sanguino 0023r4
...
This is the actual Sanguino release for Arduino 023.
It has full ATmega1284p support.
Reference:
https://code.google.com/p/sanguino/downloads/detail?name=Sanguino-0023r4.zip&can=2&q=
2013-02-27 22:29:46 +01:00
Dirk Eichel
a069d30a4b
Add additional Sanguino bard versions to boards.txt
...
ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
2013-02-27 22:17:42 +01:00
daid
7ce509b9a7
Merge pull request #361 from yuroller/MakefileSanguino
...
Makefile sanguino
2013-01-08 06:22:27 -08:00
daid303
442ade15a6
Move Gen6 stuff into a proper location.
2013-01-08 12:31:28 +01:00
Yuri Valentini
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
2013-01-07 17:26:50 +01:00
Yuri Valentini
69582042d7
Definitions for Sanguino SPI
2013-01-04 18:32:08 +01:00
daid303
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
2012-12-10 12:02:29 +01:00
