Scott Lahteine
25e86a520d
Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again
...
[1.1.x] Cleanup for SD Print Again
2017-10-29 19:09:34 -05:00
Scott Lahteine
b0e282a74b
Cleanups for SD_REPRINT_LAST_SELECTED_FILE
2017-10-29 19:02:17 -05:00
Scott Lahteine
e792c2b234
Followup to #8123 - to match 2.0.x changes
2017-10-29 05:39:44 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops
...
[1.1.x] Dual endstops XYZ
2017-10-29 04:36:09 -05:00
Rowan Meara
9850ba0cbd
[1.1.x] Fix M303 thermal protection #8103 ( #8126 )
...
* Fixed M303 thermal protection
The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values. When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on. I changed this to look directly at the PWM amount
when pid is enabled.
* Turn off heaters on M303 error
Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out. I added calls to disable the heaters in these scenarios.
* Removed unnecessary if statement.
Added changes suggested by GMagician.
* Update temperature.cpp
* Update temperature.cpp
* Update temperature.cpp
2017-10-29 04:34:47 -05:00
Scott Lahteine
318c419f77
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
Scott Lahteine
7e1232269a
Add Dual Steppers / Endstops to configs
2017-10-29 03:49:45 -05:00
Scott Lahteine
62d52d62dc
Cleanup for DIGIPOTS settings
2017-10-29 03:49:32 -05:00
LVD-AC
77cf42588f
(1.1.x) serious bug G33
2017-10-29 00:22:55 +02:00
Scott Lahteine
a979c428ee
Revert default BABYSTEP_MULTIPLICATOR to 1
2017-10-27 19:42:51 -05:00
jmdearras
6920769a9a
Added MKS GEN L board ( #8088 )
...
[1.1.x] Add MKS GEN L board
2017-10-27 02:13:41 -05:00
Scott Lahteine
410aa0716d
Concise SD_REPRINT_LAST_SELECTED_FILE description
2017-10-27 00:10:04 -05:00
Scott Lahteine
445a7f65cd
Clean up trailing whitespace
2017-10-27 00:02:35 -05:00
Luc Van Daele
e64cfb13b8
(1.1.x) auto tune calibration parameters ( #8031 )
...
* auto tune calibration parameters
* solve warnings
* Tweaks to formatting
* review Thinkyhead
* Error
2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845
Tweak neopixel self-test
2017-10-26 22:46:11 -05:00
Scott Lahteine
9aac3d8773
Add some Polish translations
...
Thanks @SCiunczyk
2017-10-26 22:44:23 -05:00
Scott Lahteine
6569b9ba56
Fix FWRETRACT logic, apply common sense
2017-10-26 22:36:41 -05:00
Bob-the-Kuhn
7ab9abe4ef
Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix
...
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
2017-10-26 16:09:52 -05:00
Bob-the-Kuhn
3357170b18
give this language an unique name
2017-10-26 15:48:00 -05:00
Roxy-3D
2e746f2b8b
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE ( #8104 )
...
* Initial conflict resolution
All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines
* Resolve non-SD case in ultralcd.cpp
2017-10-26 11:44:55 -05:00
Bob-the-Kuhn
594c075377
1.1.x - save 1400 bytes of FLASH by using reduced font for some languages ( #8095 )
...
* use reduced sized font for some languages
* Fit Portuguese language files to existing scheme
* Rename language_pl-DOGM.h to language_pl_utf8.h
* Rename language_pl_utf8.h to language_pl-DOGM.h
* Update dogm_font_data_ISO10646_1.h
* Update dogm_font_data_ISO10646_1.h
2017-10-25 18:32:38 -05:00
Scott Lahteine
8bb1e91afd
More specific M100 description
2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5
Merge pull request #8048 from madmo/mks-mini-gt2560
...
[1.1.x] Add MKS MINI 12864 support to GT2560
2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a
Fix spacing, use single instances of similar pins
2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d
Encourage users to re-examine their configs
2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8
Apply physical limits to mesh bounds
2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d
Merge pull request #8073 from thinkyhead/bf1_fix_M600
...
[1.1.x] Fix position sync in M600 pause/resume
2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08
Merge pull request #8061 from thinkyhead/bf1_general_cleanup
...
[1.1.x] Patch up some verbiage in configs
2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d
Fix position sync in M600 pause/resume
2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff
lcd <20 disply Bed Temperature cast ty ( #8068 )
2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8
Patch up some verbiage in configs
2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4
change to better (more clear) names ( #8049 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f
Add MKS MINI 12864 support for GT2560
2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734
Add M290 babystepping ( #8014 )
...
* Add M290 babystepping
* Allow `Z` for `M290`
* fix spacing
* Support BABYSTEP_XY in M290
* Not just Z
* Extend M290 for BABYSTEP_ZPROBE_OFFSET
* tweak
2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 ( #8041 )
...
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a
Add SCROLL_LONG_FILENAMES advanced option
...
Based on #7637 by @marcio-ao
2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2
BQ enables this in the config. Remove here
2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270
Simplify Cartesian probing bounds
...
Followup to #8011
2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33
boolval revised ( #8017 )
2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8011 )
2017-10-18 10:03:00 -05:00
studiodyne
e04902f589
Add EXTRA_FAN_SPEED feature
2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b
Merge pull request #7948 from gallynero/patch-1
...
Enable change feedrate in delta
2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19
Add Capability BUILD_PERCENT
2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68
Unaccented French for Character Display
2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7
Add control board MAKEBOARD Mini
...
+Add French language without accent for japanese LCD
2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946
Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops
...
[1.1.x] Software endstop options by axis
2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 17:14:19 -05:00
