Scott Lahteine
6453b82a5e
Clean up trailing whitespace
2019-01-23 15:57:01 -06:00
Marcio Teixeira
54fdf57b8c
ExtUI: Fix fan wrapping around from 0 to 100 ( #12987 )
2019-01-22 23:33:10 -06:00
InsanityAutomation
dbe4126e07
Update language_en.h ( #12988 )
2019-01-22 23:32:01 -06:00
teemuatlut
e5801b75f8
Fix TMC-related compile issues. ( #12971 )
...
- `STEALTHOP_[XYZE]` configuration options now set the default state.
2019-01-20 23:54:57 -06:00
InsanityAutomation
a1cf49935d
Add laser control menu ( #12883 )
2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e
LCD SD Card items near top when not using wheel ( #12926 )
2019-01-20 23:24:53 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
lanserge
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
2019-01-19 23:43:32 -06:00
Ludy
c6991109b7
Update German language ( #12953 )
2019-01-19 18:50:24 -06:00
Giuliano Zaro
ca9eb14f6a
Update Italian language ( #12951 )
2019-01-19 18:48:13 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Marcio Teixeira
f4c16e683b
Follow up fixes to #12884 ( #12940 )
2019-01-17 18:48:29 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
InsanityAutomation
59b18aaeef
Allow resume from pause with parking enabled ( #12893 )
...
Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people.
I understand more work needs to be done to resolve some of the concerns...
2019-01-15 07:58:54 -07:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf
Tweak SD section of Main Menu
2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-12 18:07:28 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types ( #12892 )
2019-01-12 16:01:04 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
InsanityAutomation
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
2019-01-10 19:15:17 -06:00
Scott Lahteine
e6484d9dab
Return to status when SD card is removed
2019-01-10 15:43:31 -06:00
Scott Lahteine
da42f27c9e
Use maths macros for ceil/floor
2019-01-05 21:21:02 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
kAdonis
637fb20c75
Allow 4 fan animation frames ( #12772 )
2019-01-03 06:03:06 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
14ddda285c
Confirmation on Abort SD print ( #12717 )
2018-12-27 11:36:39 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Ondřej Nový
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
2018-12-20 15:28:46 -06:00
Luc Van Daele
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
Marcio Teixeira
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
2018-12-12 17:21:37 -06:00
Scott Lahteine
daf07e4200
Align classic bed icon consistently
2018-12-09 12:00:10 -06:00
Scott Lahteine
18fedafbc5
Refresh screen on SD Init
2018-12-08 15:31:59 -06:00
Scott Lahteine
ef81b5f03e
Link to font docs in ultralcd_DOGM.cpp
2018-12-07 19:10:55 -06:00
Scott Lahteine
64389acdf1
Print a space after scrolling status
2018-12-03 06:17:09 -06:00
Scott Lahteine
7a361ad36a
Alternative fan image option ( #12579 )
...
* Alternative fan bitmap
* Move bed over by 3px
2018-12-03 05:55:33 -06:00
Scott Lahteine
261c6f4b96
Fix pause/resume SD print
...
Followup to #12551 , addressing #12566
2018-11-30 19:23:08 -06:00
Scott Lahteine
2224a4d61a
Remove AVR-only MARLIN_DEV_MODE code
2018-11-30 17:54:24 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
Scott Lahteine
69d869c3d9
Tweak FR icon. Update font data.
2018-11-29 12:59:30 -06:00
Scott Lahteine
0c1cd9f590
Fix "No SD Card" indicator
2018-11-29 12:35:31 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
2018-11-28 19:28:31 -06:00
Scott Lahteine
61db0b65b6
Followup to heating progress
2018-11-28 14:47:43 -06:00
Scott Lahteine
4f9ec9ab45
Add heating progress bars ( #12543 )
2018-11-27 21:15:52 -06:00
Scott Lahteine
01b5c810d5
Space out multiple edit lines a bit
2018-11-27 18:10:19 -06:00
Scott Lahteine
cecc238f68
Save recovery info on SD pause
2018-11-27 14:42:19 -06:00
Ludy
e5019a0481
Fix English special symbols ( #12529 )
2018-11-25 18:19:12 -06:00
