gregor
2739c26c4f
changes:
...
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
2013-05-10 22:20:02 +02:00
gregor
6fb9573157
added support for the reprapworld keypad
2013-05-10 21:57:17 +02:00
Martin Renold
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
2013-05-01 08:30:24 +02:00
Lukasz Stefanowicz
d71f1e9bf6
Add (as an option) slower SD transfer mode
2013-04-24 10:50:57 +02:00
MaikStohn
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
2013-04-16 14:21:39 +02:00
daid303
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
2013-04-12 13:54:38 +02:00
ErikZalm
7a5c474d91
Update Configuration.h
2013-03-28 21:27:50 +01:00
ErikZalm
9fb8bd5685
Merge pull request #433 from whosawhatsis/bang-mode
...
Separate PID_MAX from BANG_MAX
2013-03-25 13:11:34 -07:00
whosawhatsis
fd5b7e0cec
Separate PID_MAX from BANG_MAX
...
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
2013-03-22 18:16:26 -07:00
blddk
72419f69a9
Added rumba
2013-03-22 18:41:54 +01:00
Dirk Eichel
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
2013-03-01 17:39:54 +01:00
Denis B
70871715e4
Added support for extruder offset handling
...
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
2013-02-04 23:05:45 -05:00
Daniele Sdei
9ecb267b63
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-01-14 15:47:40 +01:00
Daniele Sdei
3cf59f6f9a
add RepRapPro Huxley thermistor tables
2013-01-14 15:36:08 +01:00
daid303
bbe7d3d0fe
Fixed #312
2013-01-08 17:09:57 +01:00
daid303
8b88e3b386
Fixed #345 , Fixed #267 .
2013-01-08 12:14:55 +01:00
Nicolas Rossi
f3c1fc70a9
Power signal control definitions for ATX and others
2013-01-07 14:33:30 +01:00
daid303
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
2012-12-12 09:08:37 +01:00
daid303
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
2012-12-11 14:53:53 +01:00
Johann Rocholl
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
2012-12-11 01:54:40 -08:00
Johann Rocholl
42e21bb06e
Add support for Printrboard (from https://github.com/lincomatic/Marlin ) and Brainwave (from https://github.com/metrix/Sprinter ).
2012-12-08 10:49:01 -08:00
Erik vd Zalm
f934d0ef5b
Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
2012-11-21 20:36:30 +01:00
Martin Lukasik
2f771b3979
Added automatic build numbering.
2012-11-12 21:06:59 +00:00
daid303
a27fef8750
Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL.
2012-11-11 11:06:58 +01:00
daid303
ffc69537aa
Update on some comments, make the MOTHERBOARD list complete again.
2012-11-09 09:10:51 +01:00
Jonathan Bastien-Filiatrault
46b9988e26
Search and replace failure.
2012-11-07 16:09:30 -05:00
Jonathan Bastien-Filiatrault
36b452c7ac
Remove abbrs.
2012-11-07 15:42:18 -05:00
Jonathan Bastien-Filiatrault
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
2012-11-06 20:32:13 -05:00
Robert F-C
65c9a0728f
Set default serial port back to 0.
2012-11-05 22:15:07 +11:00
Robert F-C
ab9d183024
Make serial port configurable.
...
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
2012-11-05 21:34:27 +11:00
brupje
326423719f
Add support for Megatronics
2012-10-14 14:05:57 +03:00
ErikZalm
36a746d7d5
Merge pull request #244 from markfinn/pidbed
...
PID for heated bed
2012-10-08 11:15:16 -07:00
Mark Finn
04631d2250
cleanup for pull
2012-09-17 14:17:24 -05:00
ZetaPhoenix
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
2012-09-15 15:25:49 -07:00
ZetaPhoenix
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
2012-09-14 21:48:49 -07:00
Mark Finn
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
2012-09-12 21:18:59 -05:00
Erik vd Zalm
e358a2d7af
Added fix for SF Arc Point fillet procedure
2012-09-02 01:12:49 +02:00
tonokip
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
...
motor current and microstepping pins.
2012-08-30 00:16:57 -07:00
Erik vd Zalm
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
2012-08-11 15:51:04 +02:00
Dabble63
6b45e9f167
Add Duty Cycling to the Heater Bed
2012-08-11 09:17:47 +03:00
Chris Palmer
538189cc19
Fixed soft limits when the origin is in the middle.
...
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
2012-07-14 22:24:26 +02:00
Erik van der Zalm
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
2012-07-14 14:21:53 +02:00
Erik van der Zalm
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
2012-07-14 13:43:19 +02:00
Bernhard
0c123950e9
__ header file replace
2012-06-02 20:44:17 +02:00
Bernhard
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
2012-06-02 13:47:50 +02:00
Bernhard Kubicek
6b14f95b3e
Merge pull request #170 from linagee/Marlin_v1
...
Marlin v1
2012-06-02 03:46:56 -07:00
linagee
fbd282b3ba
Update Marlin/Configuration.h
2012-05-20 13:19:28 -06:00
linagee
c4490f5f3d
Update Marlin/Configuration.h
2012-05-20 04:27:52 -06:00
Daid
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2012-05-19 17:38:46 +02:00
linagee
de2ca3b2e8
Grammar correction.
2012-05-19 07:40:35 -06:00
