3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity
8,329 Commits 21 Branches 81 Tags 1.9 GiB
451c1fb5f9
Commit Graph

6886 Commits

Author SHA1 Message Date
Scott Lahteine
4e19ff75b6 XON/XOFF corrections, tweaks, formatting, etc. 2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a Add XON/XOFF options to example configs 2017-10-02 03:52:41 -05:00
etagle
2864ef8c7f Slight improvement to the line parsing logic, saving 8 cycles per character 2017-08-08 02:57:55 -03:00
etagle
534bbb81ff Adding XON/XOFF and STATISTICS implementation 2017-08-08 02:46:37 -03:00
etagle
3e5485de92 Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed 2017-08-08 02:30:04 -03:00
etagle
9e147e9ac4 Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port 2017-08-08 02:22:33 -03:00
etagle
8ab2e420f6 Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage 2017-08-08 02:18:42 -03:00
etagle
b4c53af07d Adding a new macro to be able to determine if a given integer value is a power of 2 2017-08-08 02:09:50 -03:00
Jozsef Kiraly
97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9 Add a sanity check for valid bed size 2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19 Use float to init TMC2133 steps-per-mm 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749 Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check 
As proposed in #7429
 2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031 Example config for Geeetech I3 Pro X with GT2560 controller 2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9 Bring configs up to date 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675 Merge pull request #7410 from benlye/user-script-feedback 
Make audible user script feedback optional
 2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) 
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT

* Fix Identation

* Make use of IS_SD_PRINTING macro

as per @MagoKimbra
 2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4 Make audible user script feedback optional 
Add a parameter to enable/disable audible user script feedback
 2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb Update language_de.h 
Add
MSG_BLTOUCH                    
MSG_DELTA_SETTINGS            
MSG_UBL_MESH_EDIT                
MSG_UBL_OUTPUT_MAP_BACKUP        
MSG_UBL_STEP_BY_STEP_MENU       
MSG_Z_FADE_HEIGHT
 2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1 Followup cleanup patch 
Fix regression in #7428
 2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a Merge pull request #7409 from FHeilmann/bf_update_ru_translation 
Update Russian Translation
 2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0 Clean up whitespace, trailing space, bad tab conversion, etc. 2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6 Fix large Z corrections when nozzle moves off of UBL mesh (#7415) 2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4 Update Russian Translation 2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97 Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements 
Clarify LCD_BED_LEVELING requirements
 2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c Clarify LCD_BED_LEVELING requirements 
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled.  See #7396
 2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5 Fix for #7395 
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
 2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9 Fix DUAL_X_CARRIAGE not moving at all 
Axis would only move when homing.
Bug introduced in 91841d75c9.
Fixes #6956, fixes #7050 and fixes #7291
 2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91 Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor 
Manual Bed Leveling: Goto previous Z height at each probe point
 2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0 Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv 
Fixes for FWRETRACT
 2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3 Manual Bed Leveling: Goto previous Z height at each probe point 2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030 Merge pull request #7372 from tcm0116/delta_calib_menu 
Move Delta Calibration menu to the Prepare menu
 2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca Move Delta Calibration menu to the Prepare menu 2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a Patch to fix some compiler warnings 2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf Tweak kill action #ifdef 2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5 Don't reset grid with G29 Q + PROBE_MANUALLY 2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d Merge pull request #7363 from marcio-ao/bugfix-1.1.x 
Makefile fixes and U8G support.
 2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8 Added support for U8G. 2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo 2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4 Don't let the flow multiplier affect retract/recover length 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b Remove @ section fwretract 2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48 Remove extraneous USBCON defines for AT90USB boards 
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
 2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip. 
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
 2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463 Bring Infitary i3 config up to date 2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548 Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin 
MKS 1.3+: Add pin mapping for PS_ON
 2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399 Update Russian translation - Part 1 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 19:32:37 -05:00