Scott Lahteine
1446b5f01d
Allow more avr variants with build_marlin*
2017-06-25 14:16:28 -05:00
Scott Lahteine
efc6a9c1b8
Merge pull request #7136 from thinkyhead/bf_digipot_save
...
Edit digipot currents via LCD, save to EEPROM
2017-06-25 04:01:54 -05:00
dot-bob
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d
Various cleanups ahead of digipot save
2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb
Config spacing & consistency, group custom LCDs
2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc
Apply #elif in LCD conditionals
2017-06-24 13:56:33 -05:00
Scott Lahteine
ece89bcf7a
Merge pull request #7119 from thinkyhead/bf_vref_MCP4018
...
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 13:27:17 -05:00
Scott Lahteine
afbc6e3e2f
Update DELTA/SCARA config comments
2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 12:35:34 -05:00
Scott Lahteine
ebe6719e12
Merge pull request #7128 from thinkyhead/bf_enhanced_arcs
...
Enhance G2/G3 with 'P' and G17/G18/G19 Plane Select
2017-06-23 15:12:15 -05:00
Scott Lahteine
80a232419d
CNC workspace planes and 'P' argument for G2/G3
2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb
Formatting tweaks
2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be
Label DualXMode enums
2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a
Fix pinsDebug compile errors
2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
a18324bc8d
Give a more detailed issue template
2017-06-22 18:17:02 -05:00
Scott Lahteine
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
...
Add link to F. Malpartida LiquidCrystal library
2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
...
French update
2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
...
* fix_planner_refresh_e_positioning
* Fix
2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7
French translation
2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729
added missing italian translation
2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
...
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
...
Apply maths macros and type changes ahead of HAL
2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
Scott Lahteine
d5368461f9
Merge pull request #7098 from thinkyhead/bf_ubl_steps
...
Step-by-Step Menu addition
2017-06-19 23:12:52 -05:00
Scott Lahteine
e907654d6a
Do two or three fewer test builds
2017-06-19 23:08:45 -05:00
Scott Lahteine
6c45d0fd81
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c
Improve the experience of editing steps_per_mm
2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56
Fix and improve LCD value editing display
...
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95
Clean up, put ubl menu itemization closer at hand
2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926
Step-by-Step Menu addition
2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
2017-06-19 17:46:41 -05:00
Scott Lahteine
7b79f443ef
Merge pull request #7096 from thinkyhead/redo_DSE
...
Support for two switching extruders
2017-06-19 17:32:24 -05:00
Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Scott Lahteine
17f69f8ca2
Merge pull request #7094 from thinkyhead/bf_fix_advance_rate
...
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
2017-06-19 16:38:41 -05:00
Ross Allan
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
...
Fix Italian language mapper
2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
...
I2C Position Encoders Example Configs
2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2
Fix Italian language mapper
2017-06-19 01:01:40 -05:00
Scott Lahteine
7e028ec429
Merge pull request #7089 from thinkyhead/bf_italian_update
...
Added missing Italian translations
2017-06-19 00:16:14 -05:00
Silvio Didonna
2e26a7c752
Added missing Italian translations
2017-06-18 23:37:48 -05:00
Scott Lahteine
2e1b7d3a22
Merge pull request #7079 from thinkyhead/bf_m600_fixes
...
M600 fixes
2017-06-18 23:32:07 -05:00
Scott Lahteine
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48
Formatting and spelling
2017-06-18 23:01:12 -05:00
