Scott Lahteine
56d5c5b97a
Misc. comments
2018-02-04 21:16:07 -06:00
Thomas Moore
5b4e39a429
Apply feedrate to nozzle movement for kinematic machines
2018-02-03 22:17:13 -06:00
Scott Lahteine
8bccd0ef5b
Fix up _Bootscreen.h and _Statusscreen.h
...
- Support for 3 and 4-frame fan animation
- Binary bitmap data for easier visualization
- Cleanup mystery numbers, etc.
2018-02-02 00:55:02 -06:00
Scott Lahteine
c970869d74
Add hotEnough methods
2018-01-22 05:46:19 -06:00
GMagician
2814103458
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
2018-01-19 19:41:45 +01:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 ( #9213 )
...
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4. It also broke G26's
ability to abort in several of its phases.
This is the first pass at fixing the problem. It has been tested for
correctness for several hours but more testing needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.
Some of these changes will need to be moved over to the bugfix-v2.0.0
branch. That will happen a few days from now.
2018-01-17 00:27:50 -06:00
Bob-the-Kuhn
4393c3ef7f
LCD_CONTRAST to uint16_t for 1.1.x parity ( #9148 )
2018-01-11 18:32:41 -06:00
Tannoo
2c3bdfe2ea
[1.1.x] UBL Mesh Storage Message ( #9094 )
2018-01-07 20:07:20 -06:00
Bob-the-Kuhn
0868907359
works
2018-01-05 19:12:34 -06:00
Scott Lahteine
fbda8a2e2b
UBL G29 works without settings.load
2018-01-05 15:47:52 -06:00
Scott Lahteine
3d34dddbc0
Squish lcd_advanced_pause_show_message
2018-01-05 15:47:52 -06:00
Scott Lahteine
e7bf7e6031
Make FWRetract class for 2.0.x parity
2018-01-04 17:54:24 -06:00
Thomas Moore
faf7dda9d3
Fix 'lcd_temp_menu_e0_filament_change' was not declared error
2018-01-03 19:18:34 +00:00
Tannoo
d3139e47f8
[1.1.x] EEPROM init fix ( #9002 )
2018-01-03 04:28:15 -06:00
Thomas Moore
586d50ff99
Fix UBL compilation warnings
2018-01-02 19:41:02 -06:00
Roxy-3D
949191215b
Z BabyStepping should not be dependent on a bed leveling system being active
2018-01-01 14:39:28 -06:00
houseofbugs
a66811a597
A specific option to SLIM_LCD_MENUS
2017-12-31 00:15:24 -06:00
Thomas Moore
81193e9338
Add M701 / M702 filament load / unload
2017-12-30 19:48:21 -06:00
Scott Lahteine
18e277d9d3
Enqueue commands properly in ultralcd.cpp
2017-12-30 04:16:50 -06:00
Marcio Teixeira
6195f7810a
Multi extruder support for M600 and LCD (FR #8672 )
2017-12-26 22:59:05 -06:00
Scott Lahteine
ecba9b6738
Merge pull request #8897 from thinkyhead/bf1_lcd_click_redraw
...
[1.1.x] Clear lcd_clicked on use
2017-12-26 20:54:31 -06:00
Timothy Hoogland
8ea3b29c17
Fix NO_VOLUMETRICS compile error
2017-12-26 19:32:09 -06:00
Scott Lahteine
81f1001b2c
Clear lcd_clicked immediately on use
2017-12-25 21:50:58 -06:00
Scott Lahteine
5f0026893f
Fix some compiler warnings
2017-12-25 08:51:35 -06:00
Scott Lahteine
3c7cdcdc22
General cleanup of config-store, reset_bed_level
2017-12-25 04:23:52 -06:00
Scott Lahteine
10d73155b0
Hide LEVELING item for probeless w/out LCD Leveling
2017-12-17 21:24:46 -06:00
Scott Lahteine
e1b998e40a
More externs and functions in Marlin.h
2017-12-15 18:18:26 -06:00
Scott Lahteine
a20eacaa48
UBL devel debugging flag
2017-12-11 00:20:29 -06:00
Scott Lahteine
574153a810
No lcd_map_control needed in quick_stop
2017-12-06 21:43:26 -06:00
Scott Lahteine
1063b3b2b8
Changes for parity with 2.0.x
2017-12-06 21:19:17 -06:00
Scott Lahteine
ff26b7446c
Standardize LCD interface code for UBL a little
2017-12-06 21:12:55 -06:00
Scott Lahteine
7b6ad28a5d
General UBL/G26 code cleanup
2017-12-06 21:12:55 -06:00
Scott Lahteine
d951ba83e6
Show "Level Bed Corners" item with UBL too
...
Addressing #8676
2017-12-05 21:56:04 -06:00
Scott Lahteine
68c1f05aeb
Cleanups/changes to led control menu
2017-11-30 00:04:43 -06:00
Tannoo
e25567a5dd
New feature: LED_CONTROL_MENU
2017-11-29 20:57:38 -06:00
Scott Lahteine
915c4b9ce2
Make MBL work more like PROBE_MANUALLY
2017-11-27 00:09:23 -06:00
Scott Lahteine
5a1f1305f0
SD Menu patches
2017-11-26 01:10:06 -06:00
Scott Lahteine
3cf31205bc
Tweaks to bed leveling menus
2017-11-26 00:06:10 -06:00
Scott Lahteine
59a699063a
Fix #8537
2017-11-24 15:54:03 -06:00
Scott Lahteine
c0190eff00
Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x
2017-11-24 15:54:02 -06:00
Scott Lahteine
3b431f2f72
Arrange G26 functions in dependency order
2017-11-23 22:30:22 -06:00
Roxy-3D
8282d732c1
Make G26 work with all mesh leveling.
...
Example Configuration.h files are not updated yet. You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory. (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
2017-11-23 21:41:27 -06:00
Scott Lahteine
99b71c1dde
Move lcd_map_control to UBL
...
For parity with bugfix-2.0.x
2017-11-22 18:45:55 -06:00
Scott Lahteine
73ddc762c8
Fix up LCD init / charset
2017-11-22 18:07:03 -06:00
Scott Lahteine
4f05a66ee1
Fixes #8472
2017-11-18 05:14:31 -06:00
Scott Lahteine
622d100c30
No retroactive changes with M851 Z
2017-11-18 03:37:07 -06:00
Scott Lahteine
a6ee4a0468
Apply SDCARD_SORT_ALPHA changes from 2.0.x
2017-11-15 01:09:13 -06:00
Scott Lahteine
3293823642
Add pre-calculated planner.e_factor
2017-11-10 20:09:59 -06:00
LVD-AC
8ce9306b27
PROBE_SELECTED etc.
2017-11-10 19:17:45 -06:00
Thomas Moore
658e1ebe5a
Add delta_height variable in lieu of using home_offset
2017-11-08 23:21:02 -06:00
