10294 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Scott Lahteine	f6cc89ec7c	LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD	2018-02-17 08:17:22 -06:00
blye	330437ad7c	Update LCD_SET_PROGRESS_MANUALLY in configs	2018-02-17 08:12:10 -06:00
blye	168af8bacb	Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT	2018-02-17 07:54:24 -06:00
Scott Lahteine	bf5df306e1	Fix compile error with SHOW_BOOTSCREEN disabled ... Fix #9530 Fix #9524	2018-02-17 00:52:08 -06:00
Scott Lahteine	3021058e6d	Fix non-UTF8 Czech language	2018-02-16 22:23:29 -06:00
Scott Lahteine	bd54ce830a	Include utility.h in neopixel.cpp	2018-02-16 22:19:34 -06:00
Scott Lahteine	ff90cb409e	No space for E2 with ReARM+RAMPS ... Addressing #9474	2018-02-16 21:37:26 -06:00
Scott Lahteine	d7f82c8ddf	Drop extra avr/pgmspace include in _Bootscreen.h ... Addressing #9441	2018-02-16 18:36:35 -06:00
Scott Lahteine	1bf2b1e475	Use serial macro in sd_mmc_spi_mem.cpp for Due	2018-02-16 17:57:24 -06:00
Scott Lahteine	241e55ef3b	Apply SERIAL_FLUSH macro	2018-02-16 17:32:12 -06:00
Scott Lahteine	1f8f8c9104	Merge pull request #9657 from petrzjunior/bugfix-2.0.x ... [2.0.x][Language] Update Czech (Advanced pause...)	2018-02-16 02:54:06 -06:00
Thomas Moore	cff62042ee	Fix LCD manual movement on kinematic machines (#9655)	2018-02-16 02:34:36 -06:00
teemuatlut	749bc42aa9	TMC SGT is int8 (#9651)	2018-02-16 02:19:33 -06:00
Bob-the-Kuhn	2d749d490b	Fix / complete USE_CONTROLLER_FAN (#9666)	2018-02-16 02:18:50 -06:00
Scott Lahteine	08d685c97a	Followup to 21e60fd	2018-02-16 02:09:17 -06:00
Scott Lahteine	c49844df66	!ENABLED => DISABLED	2018-02-16 01:51:34 -06:00
Scott Lahteine	304e0f8945	Followup to 21e60fd ... `ENABLED` only works for flag-type options. Floats must use `#ifdef`.	2018-02-15 22:24:23 -06:00
Scott Lahteine	6a70a4fbb3	Fix G26 circles (#9627) ... Easier to configure. Catch an odd divisor.	2018-02-15 22:11:26 -06:00
Bob-the-Kuhn	4ea7e723fe	Merge pull request #9667 from Bob-the-Kuhn/USE_CONTROLLER_FAN-config-2.0.x ... [2.0.x] Improved CONTROLLER_FAN_PIN example in Configuration_adv.h	2018-02-15 21:45:25 -06:00
Bob-the-Kuhn	349dafa728	config update (set to -1)	2018-02-15 21:42:54 -06:00
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	2018-02-15 15:07:42 -06:00
Petr Zahradník	d81e9ce7cb	Add CHARSIZE to ignorelist	2018-02-15 20:23:02 +01:00
Petr Zahradník	5d9e16ea49	Update Czech advanced pause	2018-02-15 20:22:22 +01:00
Roxy-3D	c78e1c0f23	Fix G26 Circles... (#9641) ... * Fix G26 Circles...	2018-02-15 11:15:15 -06:00
Bob-the-Kuhn	b648999528	Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x ... [2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller	2018-02-14 22:43:17 -06:00
Marcio Teixeira	8db67d1647	Fixed compilation when using avr-gcc ... - avr-gcc is more strict than the Arduino IDE, it seems.	2018-02-14 15:51:25 -07:00
Marcio Teixeira	f05bd7f082	Added files missing from earlier commit.	2018-02-14 14:51:35 -07:00
Marcio Teixeira	4880ac6533	Added a light-weight status screen for the ST7920 ... - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	2018-02-14 14:43:54 -07:00
Roxy-3D	3d74ff3c87	Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES ... There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by ``` void unified_bed_leveling::line_to_destination_cartesian() ``` not watching over the segments being queued up for movement.	2018-02-14 14:16:12 -06:00
Scott Lahteine	5dc04c5201	Fix #9361	2018-02-14 07:48:20 -06:00
AnHardt	133b38b93b	Complete M48 description (#9631)	2018-02-14 05:17:58 -06:00
Scott Lahteine	93c0198b2d	Init LCD welcome message programmatically	2018-02-14 05:09:44 -06:00
Scott Lahteine	f0debfd2fc	See if this passes Travis CI	2018-02-14 04:26:10 -06:00
Scott Lahteine	67a4cc610b	French update ... Based on #9610	2018-02-14 04:15:47 -06:00
Scott Lahteine	e7b50c89b0	Fix #9201 ... FILAMENT_LCD_DISPLAY can work with SDSUPPORT	2018-02-14 03:29:47 -06:00
Scott Lahteine	8d71ad37cb	flush comment to match 1.1.x	2018-02-14 02:56:18 -06:00
Scott Lahteine	272f132b82	Remove stray ` from STM32F1 HAL ... As noted in #8585	2018-02-14 01:06:37 -06:00
Scott Lahteine	5b70d3da1c	Update DIGIPOT_I2C_MOTOR_CURRENTS comments	2018-02-13 22:54:12 -06:00
Scott Lahteine	2ec65051fd	Fix serial comment sp.	2018-02-13 22:40:56 -06:00
Bob-the-Kuhn	9a423e9a89	tested	2018-02-13 21:59:18 -06:00
Scott Lahteine	d741bcf8a9	Tweak boards spacing	2018-02-13 03:49:28 -06:00
Scott Lahteine	f8912bb19f	French update ... Based on #9590 by @studiodyne	2018-02-12 01:07:47 -06:00
Scott Lahteine	e6b8207b03	Restore welcome message	2018-02-12 01:02:30 -06:00
Scott Lahteine	89165326b4	Cleanup after vim and vigor	2018-02-11 06:07:30 -06:00
Scott Lahteine	423bf9955e	Set Megatronics baud rate to 115200 ... Fix #9092	2018-02-11 03:43:36 -06:00
Scott Lahteine	377108619b	Fix plan_arc clockwise (G2) ... Fix #9482	2018-02-11 03:34:25 -06:00
Scott Lahteine	47e56afeeb	Add 'mffp' to quickly push upstream (#9587)	2018-02-11 02:16:29 -06:00
Scott Lahteine	378867d894	Update PB Rev.F pins	2018-02-11 01:45:37 -06:00
Scott Lahteine	8e0c107545	Have Kossel Pro use Z_MIN_PROBE_ENDSTOP (#9586)	2018-02-11 01:41:40 -06:00
Scott Lahteine	03d790451f	[2.0.x] HAL timer set/get count => set/get compare (#9581) ... To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.	2018-02-10 20:42:00 -06:00