66 Commits

Author	SHA1	Message	Date
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) ... Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	2018-03-11 13:07:55 -05:00
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	2018-03-10 00:17:34 -06:00
Scott Lahteine	a2a672449a	Updated boot screen description	2018-03-03 20:04:17 -06:00
Scott Lahteine	5684beae90	Bring some configs up to speed	2018-02-24 21:56:27 -06:00
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) ... From #7314 by @MrAmericanMike	2018-02-23 20:24:02 -06:00
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	2018-02-23 13:38:54 -06:00
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	2018-02-21 00:46:25 -06:00
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	2018-02-19 07:02:50 -06:00
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) ... Implemented for LPC1768.	2018-02-18 19:26:23 -06:00
Scott Lahteine	08d685c97a	Followup to 21e60fd	2018-02-16 02:09:17 -06:00
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	2018-02-15 15:07:42 -06:00
Scott Lahteine	2ec65051fd	Fix serial comment sp.	2018-02-13 22:40:56 -06:00
Scott Lahteine	38c7d53bf7	Repair some spacing	2018-02-10 19:33:26 -06:00
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	2018-02-06 00:22:30 -06:00
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	2018-02-05 22:30:03 -06:00
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	2018-02-04 18:52:44 -06:00
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	2018-01-22 01:27:11 -06:00
Scott Lahteine	348b454401	Probe bounds based on bed size	2018-01-22 01:05:11 -06:00
Scott Lahteine	fa432508b0	Followup to Ender config	2018-01-15 06:00:21 -06:00
Thomas Moore	dabb75034c	Update example configurations	2018-01-10 00:01:20 -06:00
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) ... Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	2018-01-09 16:53:12 -06:00
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	2017-12-30 23:28:53 -06:00
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) ... * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	2017-12-25 01:38:06 -06:00
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	2017-12-24 19:54:11 -06:00
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	2017-12-24 19:00:23 -06:00
Scott Lahteine	f79026acc1	Apply MKS_12864OLED_SSD1306 to examples ... Followup to #8814	2017-12-16 20:15:36 -06:00
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	2017-12-15 19:11:02 -06:00
Scott Lahteine	69d49a2438	Shorter segments may be better	2017-12-09 06:29:14 -06:00
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	2017-12-07 16:44:12 -06:00
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	2017-12-05 19:59:59 -06:00
Scott Lahteine	aa7efb96bf	Bring configurations up to date	2017-12-02 21:50:51 -06:00
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	2017-12-01 19:22:27 -06:00
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	2017-11-29 16:57:31 -06:00
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	2017-11-24 15:53:25 -06:00
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	2017-11-23 21:43:23 -06:00
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	2017-11-13 21:05:57 -06:00
Scott Lahteine	b76e173205	Move test extrusion options under G26	2017-11-13 21:05:57 -06:00
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	2017-11-10 02:31:04 -06:00
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) ... - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	2017-11-07 17:13:53 -06:00
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	2017-11-07 15:46:44 -06:00
Scott Lahteine	d83a9a53e8	Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 ... [2.0] Add SERIAL_PORT -1 option for configurators	2017-11-03 15:25:12 -05:00
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	2017-11-03 15:22:45 -05:00
Scott Lahteine	7e43dd1d23	Fix probes configuration url ... Based on #8241 by @machaj	2017-11-03 13:35:40 -05:00
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	2017-10-31 15:27:26 -05:00
Scott Lahteine	34be5d33c0	The plural of 'axis' is 'axes'	2017-10-30 14:21:43 -05:00
Scott Lahteine	7fad26549b	Concise SD_REPRINT_LAST_SELECTED_FILE description	2017-10-26 23:33:02 -05:00
Scott Lahteine	46e9eae159	Tweak to M100 config comment	2017-10-26 17:25:44 -05:00
Scott Lahteine	7f55d82fd1	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	2017-10-24 18:26:43 -05:00
Scott Lahteine	580b6e9089	Apply physical limits to mesh bounds	2017-10-24 16:54:07 -05:00
Scott Lahteine	5f87324536	Fix some config verbiage	2017-10-24 14:53:42 -05:00