Andrew
1b091ecb87
✏️ Minor style and typo fixups ( #26947 )
...
* tweaks from PR, whitespace, wording in pause.h
* Update Marlin/src/feature/pause.h
2024-04-10 23:13:54 -07:00
thinkyhead
a75a5f8b2a
[cron] Bump distribution date (2024-04-10)
2024-04-10 06:13:36 +00:00
ellensp
80dd02fbdb
📝 Update RGB565 color picker url ( #26951 )
2024-04-09 23:02:32 -07:00
Keith Bennett
e6755450df
🩹 Fix ESP3D WiFi Support ( #26822 )
2024-04-09 22:58:13 -07:00
thinkyhead
311bfc99f3
[cron] Bump distribution date (2024-04-08)
2024-04-08 00:21:49 +00:00
Keith Bennett
a3434de2e6
🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1 ( #26831 )
...
* 🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1
Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>
* Update Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h
---------
Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>
2024-04-07 12:05:35 -07:00
Keith Bennett
2bf56b00d4
🔧 Improve BIQU BX pins, allow Z swap ( #26871 )
...
* Add a swap Z & E1 option for BIQU BX
Users can add #define BX_SWAP_ZM_E1M to their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory.
* Add BOARD URL, DIAG pin info, update pin comments
* Add WIFISUPPORT defines for documentation purposes
WIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT*, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality.
* Sanity check TOUCH_SCREEN_CALIBRATION on GT911 TFTs (BIQU BX TFT70)
Use a sanity check so it's clear which options are valid for TFT_TOUCH_DEVICE_GT911 / BIQU_BX_TFT70.
2024-04-07 10:49:36 -07:00
Andrew Bortz
c31d9e717b
🩹 Fix ProUI Z probe offset text ( #26832 )
2024-04-07 09:37:37 -07:00
narno2202
d9d7820b0d
🩹 Set correct LCD serial port for MKS_MONSTER8_V1 ( #26879 )
2024-04-07 08:52:35 -07:00
sargonphin
9343247e07
🩹 Increase range of G34 accuracy target ( #26771 )
...
* Allow G34 accuracy down to 0.001mm, previous minimum was 0.01mm.
2024-04-07 08:48:13 -07:00
thinkyhead
7e9868d762
[cron] Bump distribution date (2024-04-07)
2024-04-07 06:05:53 +00:00
ellensp
d1cf817660
🐛 Fix CREALITY_ENDER2P_V24S4 pins ( #26908 )
2024-04-06 22:57:42 -07:00
Vovodroid
c91771a51e
🩹 Disable nonlinear extrusion on unretract ( #26824 )
...
* Fixes disable NLE on unretract #26808 , which reported blobs at the start of lines during unretract.
2024-04-06 22:41:01 -07:00
ellensp
a337a43bfd
🩹 Fix type mismatch when SEGMENT_LEVELED_MOVES disabled ( #26819 )
2024-04-06 21:47:40 -07:00
Keith Bennett
77f93e0b8c
🩹 Fix Mini 12864 on BTT Kraken ( #26918 )
...
Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>
2024-04-06 21:22:25 -07:00
Keith Bennett
7dc7195696
🩹 Fix active extruder indicator ( #26834 )
...
* 🩹 No active extruder when any of several incompatible features are enabled
2024-04-06 21:17:00 -07:00
ellensp
56773bd80e
🩹 add onSetMinExtrusionTemp to anycubic_viper ( #26933 )
2024-04-06 21:11:32 -07:00
thinkyhead
1dec9831d3
[cron] Bump distribution date (2024-04-06)
2024-04-06 06:06:36 +00:00
Jason Smith
390f1f7c69
🐛 Don't apply settings during validation ( #26935 )
...
Check the `validating` variable before applying settings for several features.
This specifically avoids settings corruption for BACKLASH_PREVENTION, which has side-effects when first applied using incorrect values.
2024-04-05 17:27:30 -07:00
Jason Smith
d30fcb8fff
🐛 Fix bool evalution of XYval and similar types ( #26936 )
...
Require explicit cast to get T* pointers from XYval and similar types. This prevents the pointer from being implicitly returned and checked for nullptr when trying to evaluate these structs in boolean expressions.
2024-04-05 17:24:58 -07:00
thinkyhead
17dfe8edc9
[cron] Bump distribution date (2024-04-03)
2024-04-03 00:20:46 +00:00
Scott Lahteine
7b6b6e1c3e
🩹 Revert motion change
2024-04-01 22:20:28 -05:00
Sophist
60f2837a98
🔧 Minor INPUT_SHAPING config fixes ( #26882 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2024-04-01 21:30:04 -05:00
thinkyhead
ef5fb390ec
[cron] Bump distribution date (2024-04-02)
2024-04-02 00:20:47 +00:00
Andrew
87e94f4563
🚸 Update ProUI Plot graph - part 2 ( #26563 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2024-04-01 15:05:11 -05:00
thinkyhead
017a9032f1
[cron] Bump distribution date (2024-04-01)
2024-04-01 00:23:48 +00:00
Scott Lahteine
466282f322
🩹 Misc. changes from ProUI / ExtUI updates ( #26928 )
2024-03-31 18:20:37 -05:00
thinkyhead
17594298e1
[cron] Bump distribution date (2024-03-28)
2024-03-28 00:20:53 +00:00
Chris
d3e1a92b84
🔨 Fix HC32 preflight ( #26912 )
2024-03-27 14:39:54 -05:00
Holger Mößinger
cd357b0278
🔧 🚸 Tweaks for (MiniRambo) CNC ( #26892 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2024-03-27 14:38:08 -05:00
thinkyhead
d0d229e380
[cron] Bump distribution date (2024-03-25)
2024-03-25 00:21:58 +00:00
thinkyhead
825ebfd5fe
[cron] Bump distribution date (2024-03-24)
2024-03-24 00:23:21 +00:00
John Robertson
3ee3964bec
🐛 Fix ESP32 laser M4 exception ( #26884 )
2024-03-22 19:57:23 -05:00
Sophist
aecfb257e9
🚸 Hide auto-run as needed ( #26853 )
2024-03-22 19:29:06 -05:00
thinkyhead
896a6a93af
[cron] Bump distribution date (2024-03-23)
2024-03-23 00:20:15 +00:00
Holger Mößinger
075f96d2bf
✏️ Fix stepper MS pin typos ( #26891 )
2024-03-22 16:36:42 -05:00
thinkyhead
05896551f1
[cron] Bump distribution date (2024-03-18)
2024-03-18 00:21:39 +00:00
Manuel McLure
ea6a891038
✨ MAX7219_REINIT_ON_POWERUP ( #26163 )
2024-03-17 14:23:12 -05:00
Giuliano Zaro
983aee5718
🌐 Update Italian language ( #26837 )
2024-03-16 19:46:22 -05:00
thinkyhead
c913020dc2
[cron] Bump distribution date (2024-03-17)
2024-03-17 00:22:34 +00:00
Sophist
4b01c901bc
📝 Fix M201 typos ( #26854 )
2024-03-16 15:00:16 -05:00
Keith Bennett
c1be36bc66
🎨 Add MKS TinyBee silkscreen labels ( #26777 )
2024-03-16 14:58:53 -05:00
Keith Bennett
e0222d3e01
🩹 Fix G35 "Probing Failed" output ( #26780 )
2024-03-16 14:56:33 -05:00
janenen
c0264ae787
🐛 Fix DETECT_BROKEN_ENDSTOP on IDEX ( #26790 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2024-03-16 14:52:14 -05:00
Sophist
3a2c50c199
🩹 Thermistor name fixes ( #26857 )
2024-03-16 14:09:50 -05:00
Scott Lahteine
3b4adac579
🎨 Trailing ws
2024-03-16 13:55:35 -05:00
thinkyhead
9a1c993719
[cron] Bump distribution date (2024-03-10)
2024-03-10 06:05:40 +00:00
InsanityAutomation
504219817c
✨ Redundant PSU Control with EDM ( #26751 )
2024-03-09 21:22:23 -06:00
thinkyhead
4f2b7271bd
[cron] Bump distribution date (2024-03-04)
2024-03-04 00:21:13 +00:00
fredycpu
ec6f9dd5c8
🔧 MKS_ROBIN_PRO : I2C EEPROM + MKS Wifi ( #26823 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2024-03-03 12:39:50 -06:00
thinkyhead
e6cda9932b
[cron] Bump distribution date (2024-03-02)
2024-03-02 06:06:49 +00:00
ellensp
3fd175af8e
🚸 M115 "KINEMATICS:…" ( #26806 )
2024-03-01 22:31:42 -06:00
Keith Bennett
a9e72b2a2c
🔧 Simpler CREALITY_V422 warning ( #26826 )
2024-03-01 22:09:12 -06:00
ellensp
ecde3a3158
🩹 Fix AVR bootscreen RLE decode ( #26827 )
2024-03-01 21:58:56 -06:00
DerAndere
c8d51c2723
🚸 Enable G92.9 with rotational axes ( #26174 )
...
- Supporting axes that can rotate forever.
2024-03-01 21:16:39 -06:00
thinkyhead
d609bb4671
[cron] Bump distribution date (2024-02-28)
2024-02-28 06:06:10 +00:00
Scott Lahteine
982b425792
🔥 Drop TMC26X support ( #26770 )
2024-02-27 20:45:34 -06:00
thinkyhead
9e879a5b1f
[cron] Bump distribution date (2024-02-11)
2024-02-11 00:22:45 +00:00
ellensp
9974327d33
extend uart checks
2024-02-11 03:28:37 +13:00
thinkyhead
4eba643ae1
[cron] Bump distribution date (2024-02-10)
2024-02-10 06:17:34 +00:00
Scott Lahteine
76b5688304
🚸 Optional encoder multipliers
2024-02-09 19:14:15 -06:00
thinkyhead
1e8fbb7bbb
[cron] Bump distribution date (2024-02-09)
2024-02-09 00:20:11 +00:00
Scott Lahteine
20c6a6233b
🧑💻 HC32 endstop interrupts for X2/Y2/Z4
2024-02-08 16:49:13 -06:00
Scott Lahteine
1d295f7983
🔥 Clean up SCARA/TPARA
2024-02-07 23:45:51 -06:00
Scott Lahteine
669814d0d4
✨ MARLIN_SMALL_BUILD option ( #26775 )
2024-02-07 23:40:54 -06:00
Scott Lahteine
4aa48beb37
🚸 Adjust encoder multiplier
2024-02-07 19:48:36 -06:00
thinkyhead
371fb5a256
[cron] Bump distribution date (2024-02-08)
2024-02-08 00:20:32 +00:00
Scott Lahteine
0829a511f0
🧑💻 "static_warning"
2024-02-07 18:09:36 -06:00
Scott Lahteine
a3c78c4510
🎨 Delete old FTDI Eve bootscreen
2024-02-07 14:01:25 -06:00
Scott Lahteine
a3211253a0
🩹 Fix FTDI Eve Touch UI M84
2024-02-07 13:58:49 -06:00
thinkyhead
2c8e7bd5a5
[cron] Bump distribution date (2024-02-07)
2024-02-07 12:07:15 +00:00
ellensp
005d6879d9
🔧 Restore probe XY edit defaults, remove arbitrary Z limit ( #26774 )
2024-02-07 00:33:54 -06:00
thinkyhead
3dd22349a9
[cron] Bump distribution date (2024-02-06)
2024-02-06 06:06:16 +00:00
Scott Mikutsky
e61a84a717
🚸 Keep Filament Change near the top ( #26172 )
2024-02-05 23:37:29 -06:00
thinkyhead
d8e73d3036
[cron] Bump distribution date (2024-02-05)
2024-02-05 00:21:40 +00:00
Robherc
b12340b1d5
🔧 Fix extraneous DIAG warnings ( #26694 )
2024-02-04 16:10:11 -06:00
Keith Bennett
5003681414
🩹 Fix HOTEND_IDLE_TIMEOUT with no heated bed ( #26746 )
2024-02-04 12:14:49 -06:00
Keith Bennett
d9396929aa
🩹 Update BTT GTR v1.0 DIAG jumper/pin ( #26764 )
2024-02-04 12:13:03 -06:00
Scott Lahteine
1dee4d92c6
🔧 TOUCH_IDLE_SLEEP_MINS => DISPLAY_SLEEP_MINUTES
...
Follow up to #26517
2024-02-04 12:09:48 -06:00
Smokey Pell
9364cbb4b5
🚸 Tronxy V10 w/ TFT_TRONXY_X5SA + MKS_ROBIN_TFT43 ( #26747 )
2024-02-04 09:37:32 -06:00
Taylor Talkington
755b661c2d
🔧 Fix USE_Z_MIN conditions ( #26762 )
2024-02-04 09:03:08 -06:00
thinkyhead
7f4792e47c
[cron] Bump distribution date (2024-02-04)
2024-02-04 00:22:42 +00:00
Keith Bennett
e6837b2b8d
🩹 Fix STM32 HW Serial 6 ( #26763 )
...
Followup to #26328
2024-02-03 17:19:19 -06:00
thinkyhead
9e21330d7a
[cron] Bump distribution date (2024-02-03)
2024-02-03 00:20:49 +00:00
Davide Rombolà
c476e62a6f
🩹 Fix STM32 HW Serial ( #26531 )
...
Followup to #26328
2024-02-01 19:31:39 -06:00
thinkyhead
4c5d7831c1
[cron] Bump distribution date (2024-02-02)
2024-02-02 00:20:22 +00:00
Abdullah YILMAZ
9a5cfb3f26
🌐 Turkish language update ( #26739 )
2024-01-31 20:11:08 -06:00
InsanityAutomation
5a87bea762
🚸 Fix repeating "Power Off" message ( #26755 )
2024-01-31 19:24:08 -06:00
thinkyhead
d62f45bdc1
[cron] Bump distribution date (2024-02-01)
2024-02-01 00:21:39 +00:00
ellensp
f9d5ee04b4
🩹 Patch STM32 serial UUID ( #26737 )
...
Followup to #26715
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2024-01-31 12:33:42 -06:00
thinkyhead
ef04680cc5
[cron] Bump distribution date (2024-01-31)
2024-01-31 06:06:35 +00:00
Keith Bennett
1c6cfc3ffe
🐛 Fix I/J/K chopper timing ( #26736 )
...
Followup to #19112
2024-01-30 23:00:02 -06:00
Keith Bennett
0266e7fe53
📝 Biqu => BIQU ( #26735 )
2024-01-30 22:58:06 -06:00
thinkyhead
70d942a184
[cron] Bump distribution date (2024-01-30)
2024-01-30 06:06:23 +00:00
Scott Lahteine
5639237e2b
🎨 Misc. cleanup 29-01
2024-01-29 23:10:12 -06:00
thinkyhead
541bd26cd7
[cron] Bump distribution date (2024-01-29)
2024-01-29 00:21:02 +00:00
Keith Bennett
7a4d601f4d
🩹 Temp constraints followup ( #26744 )
...
Followup to cb291e8d
2024-01-28 16:13:23 -06:00
thinkyhead
bf8675b44a
[cron] Bump distribution date (2024-01-28)
2024-01-28 00:22:35 +00:00
Scott Lahteine
ebea672240
🐛 Protect EEPROM bytes 916-926
...
Followup to #26729
Ender-3S1 STM32F401 Bootloader
2024-01-27 11:49:57 -06:00
Scott Lahteine
ce8535f01c
🧑💻 Fix warning, adjust tests
2024-01-27 11:49:57 -06:00
