3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-26 13:25:54 +00:00
Code Issues Releases Wiki Activity
10,167 Commits 20 Branches 80 Tags 1.9 GiB
7cb162ab3e
Commit Graph

1130 Commits

Author SHA1 Message Date
Paul
d8caa7ddf0 Fix hole to hole rod length for Plus model (#12157) 2018-10-19 13:47:27 -05:00
MrDiba
77d8befc6d Anycubic Kossel Z probe invert fix (#12101) 2018-10-16 01:56:36 -05:00
swilkens
82c5c85c0f [1.1.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12104) 
Homing on the Ender 3 with `HOMING_FEEDRATE_XY` set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
 2018-10-16 01:51:14 -05:00
Scott Lahteine
385c990d6f Fix Anycubic Kossel config 2018-10-04 20:26:07 -05:00
Scott Lahteine
5b8dc39506
[1.1] Fix mixing extruder g-codes (#11864) 2018-09-18 00:44:34 -05:00
Scott Lahteine
aeb959d4e4 AnyCubic LinearPlus delta configs 
Co-Authored-By: grbd <garlicbready@googlemail.com>
 2018-09-15 23:17:59 -05:00
Scott Lahteine
da5e69693d Update some config comments 2018-09-15 23:17:59 -05:00
tobbelobb
330c4bcbb9 [1.1.x] Hangprinter support (#9180) 2018-09-08 21:17:02 -05:00
Scott Lahteine
191bce3217 Bring some configs up to date 2018-09-05 04:34:09 -05:00
MaiTaiSui
f58168a6f5 Support for Anet A2 Plus (#11660) 2018-08-29 16:05:23 -05:00
teemuatlut
b4efefea8b [1.1.x] Fix TMC2208 SW serial communication (#11548) 
* New TMC2208 constructor
* Update default driver configuration
 2018-08-14 18:44:17 -05:00
Scott Lahteine
77625654f4 Reduce max accel in Creality configs 2018-08-11 22:57:44 -05:00
silentninja1
4c4fffc503 [1.1.x] Fix Dual X Carriage tool change crash (#11425) 2018-08-03 20:47:19 -05:00
Scott Lahteine
888d319145 Align some config options 2018-08-02 18:42:20 -05:00
vitekn
b5ed4a1a8c Fix thermistor type in Anet A6 config (#11346) 
I have Anet a6 and my thermistor is NTC 3950. If the default is 5 (ATC Semitec 104GT-2) it gives overheat upto 330 degrees (real) instead of 250 (displayed). I don't know for sure if all the A6 have such thermistor but I think it's safer to have underheat than overheat. And 3950 looks more spread among A6 searching on Internet. The same is true for the bed though it has small difference at the beginning of scale, actually +-2 degrees.
 2018-07-26 02:03:30 -05:00
Scott Lahteine
2af06b82b4 Specify some extra CR-10S pins 2018-07-25 18:18:33 -05:00
Giuliano
e5b928f574 [1.1.x] Typo fix (#11366) 
Typo fix
 2018-07-25 18:00:28 -05:00
Scott Lahteine
6d6bdc6517 Add *_DRIVER_TYPE to example configs 2018-07-25 02:39:16 -05:00
Scott Lahteine
ed0e72bf44 Fix spelling in configs 2018-07-24 21:02:22 -05:00
Scott Lahteine
d1590fec3e
Merge pull request #11308 from thinkyhead/bf1_manual_probe_start_z 
[1.1.x] Manual Z Start Height
 2018-07-19 18:26:51 -05:00
Roxy-3D
6c62b0e263
Change Max7219_idle_task() to use columns if Y-Axis has 16 LED's (#11317) 2018-07-19 16:59:38 -05:00
Scott Lahteine
221e8bbb05 Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:50:18 -05:00
Scott Lahteine
46b0e054b1 Add POWER_LOSS_PIN to example configs 2018-07-18 19:58:06 -05:00
kaimimue
256f76d35e Fix Vellemann K8400 Configuration (#11258) 
The maximum movement is 180mm for Velleman K8400.
An offset of `Y_MIN_POS` violates an assertion in `SanityCheck.h`.

Code tested on Vellemann K8400 with Dual Extruder.
 2018-07-13 23:15:00 -05:00
Scott Lahteine
8f110190eb Add Z_CLEARANCE_MULTI_PROBE to example configs 2018-07-12 22:27:06 -05:00
Roxy-3D
39b3e4c501
Support for multiple Max7219 units in a chain (#11226) 
* Support for multiple Max7219 units in a chain

I'll move this support over to bugfix_2.0.0 in the next few days.   And
then look at updating the Max7219_idle() routine to make use of multiple
units in a chain.

* spelling correction
 2018-07-08 17:35:58 -05:00
Scott Lahteine
fc9f4ce2c0 Fix missing quote in language list 
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
 2018-07-04 13:40:18 -05:00
Scott Lahteine
fae20983eb Add configurations for Tronxy X3A 2018-07-03 18:14:46 -05:00
Marcel Schulz
432da42dba Add thermistor 501 (100K Zonestar) 2018-07-03 18:10:55 -05:00
Scott Lahteine
84187dca5c Add "Marlin Dev Mode" option 2018-07-02 22:53:01 -05:00
Scott Lahteine
a294ec3836
Add delta feedrate scaling (#11152) 2018-06-30 13:44:37 -05:00
Scott Lahteine
654f0bed25
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11146) 2018-06-29 22:41:56 -05:00
Scott Lahteine
04fc715c91
Add minimum step dir delay option, A4988 pulse note (#11122) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-26 22:28:46 -04:00
Scott Lahteine
dc087b1132
[1.1.x] Tweaks and additions for MAX7219 (#11033) 2018-06-18 22:03:53 -05:00
Scott Lahteine
38f73d57bc Clean trailing whitespace 2018-06-10 18:42:39 -05:00
Scott Lahteine
6e49901104 Adaptive and max stepping followup 2018-06-10 16:00:38 -05:00
Scott Lahteine
b7ddfddf51 Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-10 01:56:00 -05:00
Scott Lahteine
1cdcc6adfa Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-10 01:56:00 -05:00
Scott Lahteine
aab9cb0bbe Update MINIMUM_STEPPER_PULSE description 2018-06-10 00:14:39 -05:00
João Brázio
7aa7ecbd0e Update BQ Hephestos 2 config, NTC-70 table (#10902) 2018-06-07 21:23:43 -05:00
Scott Lahteine
08090d10b6 Drop JUNCTION_ACCELERATION from example configs 2018-05-31 20:06:37 -05:00
Scott Lahteine
7445f30cbf Set deltas to park on the left 2018-05-29 11:45:17 -05:00
Scott Lahteine
a7561df3d7 Tweak configuration spacing 2018-05-26 18:31:57 -05:00
Scott Lahteine
0bfb10ffb6 Rename Junction Deviation options 2018-05-26 18:31:57 -05:00
Scott Lahteine
949ee7afe9 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:31:57 -05:00
Sebastianv650
815c4e7b3f Add missing config line for JUNCTION_DEVIATION (#10855) 2018-05-26 00:57:00 -05:00
Scott Lahteine
d1235033b2 Make sure FAN_ANIM_FRAMES is defined 2018-05-25 05:25:42 -05:00
Scott Lahteine
62d923a053 Fix K8400 Y min pos, M118 comment 2018-05-24 08:19:30 -05:00
Scott Lahteine
e63113e6ad Add ENDSTOP_NOISE_FILTER to example configs 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-21 15:29:14 -05:00
Scott Lahteine
9d36dfceda Add FAN_MAX_PWM to example configs 2018-05-15 21:17:34 -05:00