Scott Lahteine
c373afbddd
Clean up and document load/unload/pause/resume
2018-01-22 05:46:19 -06:00
Scott Lahteine
c970869d74
Add hotEnough methods
2018-01-22 05:46:19 -06:00
Scott Lahteine
74873f377d
Merge pull request #9289 from thinkyhead/bf1_ms_cs_pins_fixup
...
[1.1.x] Patch MSn pins, sanity-check TMC CS pins
2018-01-22 02:27:27 -06:00
Scott Lahteine
e8687e5b9e
Update pins.h for parity, protect MS pins
2018-01-22 02:19:04 -06:00
Scott Lahteine
198498b1aa
Sanity check for TMC2130 having CS pins
2018-01-22 02:04:21 -06:00
cprund
0527090a31
Minor bugfix to the code that enables the 2nd X stepper. It needs to be enabled for X_DUAL_STEPPER_DRIVERS. ( #9286 )
2018-01-22 01:32:09 -06:00
Scott Lahteine
dff96a8952
Merge pull request #9288 from thinkyhead/bf1_grid_bounds
...
[1.1.x] Better probe boundaries for linear/grid
2018-01-22 01:23:42 -06:00
Scott Lahteine
3d9f360b5a
Better probe boundaries for linear/grid
2018-01-22 01:10:34 -06:00
Scott Lahteine
b0bfa65be7
Merge pull request #9282 from thinkyhead/bf1_jgaurora_configs
...
[1.1.x] Add JGAurora A5 support
2018-01-22 00:46:14 -06:00
Scott Lahteine
c8ac3a2a72
Add example configs for JGAurora A5
2018-01-21 22:23:31 -06:00
Scott Lahteine
957bb3124a
Add thermistor 15 tuned for JGAurora A5
2018-01-21 16:57:47 -06:00
Øystein Krog
1f37781bf1
Fix DUAL_X_CARRIAGE endstops
...
\#8170 fixed
(cherry picked from commit 441517bbe1
2018-01-21 16:32:29 +01:00
Scott Lahteine
7b62670987
Merge pull request #9272 from thinkyhead/bf1_creality_tuneup
...
[1.1.x] Fix and improve Creality configs
2018-01-21 02:53:08 -06:00
Scott Lahteine
7b5a4f71be
Fix toDigital length with days
...
From #9220
2018-01-21 02:50:54 -06:00
Scott Lahteine
94a9cd6477
CR-10S filament change length, enhanced status bitmap
2018-01-21 01:58:55 -06:00
Scott Lahteine
0cfcc7cbf5
Make "Ender" status screen dual-nozzle ready
2018-01-21 01:58:55 -06:00
Scott Lahteine
292755258a
Add a heating indicator X offset
2018-01-21 01:58:40 -06:00
Scott Lahteine
02e2ace199
Merge pull request #9199 from nhchiu/Case-Light-use-NEOPIXEL
...
[1.1.x] Use NEOPIXEL as case light
2018-01-21 01:52:31 -06:00
nhchiu
4a40cf268d
Use NEOPIXEL as case light
...
Add an option to use the NEOPIXEL LED as case light.
2018-01-20 16:57:04 -06:00
Scott Lahteine
428fbe8228
Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:27:30 -06:00
Scott Lahteine
81a12b2fac
Relative movements fix
2018-01-20 15:22:38 -06:00
Scott Lahteine
fb636db61a
Patch to restore broken Dual X Carriage
2018-01-20 15:07:40 -06:00
Scott Lahteine
369f1a64d8
Merge pull request #9262 from tcm0116/1.1.x-delta_softstops
...
[1.1.x] Allow DELTA to compile with soft endstops disabled
2018-01-20 14:16:14 -06:00
Scott Lahteine
6ed2840615
Use delay() in serial temp report
2018-01-20 14:12:30 -06:00
Scott Lahteine
eb3a05c437
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
2018-01-20 12:00:03 -06:00
Scott Lahteine
d29a0d64d5
Set FIL_RUNOUT_PIN for Creality CR10-S
...
Tested with M43 and found to be connected to DIO 2
2018-01-20 11:58:37 -06:00
Scott Lahteine
09ad00b2d1
Use standard encoder pulses/steps for CR-10S
2018-01-20 11:34:53 -06:00
Thomas Moore
f8192f6e46
Allow DELTA to compile with soft endstops disabled
2018-01-20 09:43:59 -06:00
Scott Lahteine
f360b3b849
Date refresh
2018-01-20 09:17:00 -06:00
Scott Lahteine
6253560ffa
Additional .gitignore entry for VS Code
2018-01-19 22:33:21 -06:00
Scott Lahteine
74c23bf80d
Merge pull request #9232 from GMagician/1.1.x-ramps-pins-fixup
...
[1.1.x] Expand RAMP case light possibilities
2018-01-19 22:29:09 -06:00
Scott Lahteine
8d14ff1446
Merge pull request #9248 from GMagician/1.1.x-bed-temp-limit-fix
...
[1.1.x] Standardized max temp values
2018-01-19 22:27:00 -06:00
GMagician
2814103458
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
2018-01-19 19:41:45 +01:00
Bob-the-Kuhn
21a631dd4e
Merge pull request #9237 from Bob-the-Kuhn/TMC2208-sanity-check-1.1.x
...
[bugfix-1.1.x] add TMC2208 sanity check & fix typo
2018-01-19 12:27:03 -06:00
Bob-the-Kuhn
d0e61d82c0
TMC2208 sanity check
2018-01-18 23:16:41 -06:00
Roxy-3D
0edf5a2ab5
Better handle serial over runs...
2018-01-18 16:51:27 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run
2018-01-18 16:48:12 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations
2018-01-18 14:38:18 -06:00
GMagician
3b53c5ada1
Expand RAMP case light possibilities
...
Pin 6 is only used by servos when 2 or more of them are used
2018-01-18 18:35:08 +01:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around ( #9227 )
...
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).
This causes the printer to say "Click to resume..."
This is a temporary fix until we figure out the correct way to resolve the issue.
More work needed for G26.
2018-01-17 22:51:19 -06:00
Roxy-3D
80c1afde0f
Fix mesh size...
2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 ( #9213 )
...
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4. It also broke G26's
ability to abort in several of its phases.
This is the first pass at fixing the problem. It has been tested for
correctness for several hours but more testing needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.
Some of these changes will need to be moved over to the bugfix-v2.0.0
branch. That will happen a few days from now.
2018-01-17 00:27:50 -06:00
Scott Lahteine
333bd8f394
Merge pull request #9203 from benlye/m73-bugfix-1.1.x
...
[1.1.x] Fix progress bar duration when time is exactly 86400s
2018-01-16 21:14:31 -06:00
Bob-the-Kuhn
e668e053c2
Merge pull request #9206 from MarlinFirmware/revert-9174-fix_missing_decel_steps
...
Revert "[1.1.x] Fix missing deceleration steps"
2018-01-16 11:33:39 -06:00
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps"
2018-01-16 11:31:27 -06:00
blye
deda3d3a3c
Fix duration when time is exactly 86400s
2018-01-16 08:16:42 +00:00
Bob-the-Kuhn
ec028faa1b
Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps
...
[1.1.x] Fix missing deceleration steps
2018-01-15 21:03:51 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE
2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b
Followup to Ender config
2018-01-15 05:48:50 -06:00
Scott Lahteine
d25487dfb9
Merge pull request #9160 from tommie/ender/bugfix-1.1.x
...
[1.1.x] Creality Ender support
2018-01-15 03:48:47 -06:00
