Bo Herrmannsen
a18b625534
Merge pull request #1261 from wgm4321/Development
...
Add Filament menu and add Filament/Retract settings to config store.
2015-01-02 15:35:29 +01:00
Scott Lahteine
e7db8ee9e5
ftostr32np > ftostr32sp
...
sp=space-padded, similar to: ns=no-sign
2014-12-30 07:26:25 -08:00
Scott Lahteine
10e1b6ef8b
Least stack-usage self-contained ftostr32np()
...
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:25 -08:00
Scott Lahteine
d1f21d1189
As it should be
2014-12-30 07:26:25 -08:00
Scott Lahteine
449dad71f2
Least stack-usage self-contained ftostr32np()
...
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:24 -08:00
Scott Lahteine
a2109cb492
Patch to make Z look more like X and Y on UltraLCD
2014-12-30 07:26:24 -08:00
Caleb Anderson
cb047e9070
Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently)
2014-12-29 10:19:25 -07:00
wgm4321
cb12161191
Add Filament menu and add Filament/Retract settings to config store.
2014-12-28 20:43:14 -05:00
fmalpartida
ec33df0554
Merge branch 'SAV-MkI_merge' into Development
...
Tested for SAV MKI and SAV 3D LCD on lewihe.
2014-12-28 19:54:06 +01:00
Bo Herrmannsen
c9f60183a9
Merge pull request #1233 from NarimaanV/Development
...
Fixed BABYSTEPPING feature
2014-12-28 10:13:21 +01:00
Scott Lahteine
2f467e2797
LCD Progress Bar
2014-12-27 22:26:14 -08:00
NarimaanV
7667949aca
Fixed BABYSTEPPING feature
...
Moved PSTR() macro to correct place which was causing the " initializer fails to determine size of '__c' " when attempting to compile with BABYSTEPPING enabled.
2014-12-23 12:49:54 -05:00
daid
17de96ace7
Merge branch 'Marlin_v1' into revert-1154-sd_sorting
...
Conflicts:
Marlin/cardreader.cpp
Marlin/cardreader.h
2014-12-18 23:13:50 +01:00
Bo Herrmannsen
a9c334e8bc
Merge pull request #1191 from thinkyhead/code_shrink
...
Shrink and Optimize
2014-12-18 17:23:11 +01:00
Scott Lahteine
1857e611d3
Other small tweaks
2014-12-18 07:49:16 -08:00
Scott Lahteine
63e1665fa9
Reduce ultralcd.cpp redundancies
2014-12-18 07:30:05 -08:00
Scott Lahteine
e4b98011cf
And one more...
2014-12-17 23:01:24 -08:00
Bo Herrmannsen
31ca3de72f
Merge pull request #819 from neildarlow/Marlin_v1
...
Activate LiquidTWI2 device detection and space-pad LCD status line.
2014-12-17 21:42:53 +01:00
Bo Herrmannsen
e83cfc0a62
Merge pull request #1163 from thinkyhead/lcd_abort_message
...
LCD "Abort" Message
2014-12-17 21:30:19 +01:00
Bo Herrmannsen
0b310ab6c5
Merge pull request #1153 from xinfab/negative_values_in_menu
...
Negative values in menu
2014-12-17 20:58:01 +01:00
Bo Herrmannsen
91d740e128
Merge pull request #1141 from filipmu/Filament-Sensor
...
Display filament sensor data on a 20x4 LCD or Graphical LCD
2014-12-17 20:38:30 +01:00
alexborro
ab355a90d3
Revert "SD Sort and Buffer"
2014-12-17 14:50:59 -02:00
Scott Lahteine
ae081d0fe0
Improvements, more SORT_USES_MORE_RAM
...
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
Scott Lahteine
0cbbba08bd
SD Card Alpha Sorting
...
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
Scott Lahteine
3ebfd29312
Print a message when printing is aborted
...
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-12-13 06:01:46 -08:00
Neil Darlow
64139f5e5a
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-12-04 21:09:03 +00:00
Scott Lahteine
3f54c9ba33
Relocate click ignore code into info screen
2014-11-26 21:05:10 -08:00
Scott Lahteine
92e21d3ee2
M0-M1 Enhancements
...
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
Lionello Lunesu
0d35b1d0b8
Allow negative values in menus
2014-11-25 18:34:02 +08:00
Filip Mulier
d84934d8c5
Display Filament Sensor data on 20x4 LCD
...
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD. The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed. The status message can be seen by
re-selecting the info screen in the menu.
2014-11-10 21:43:58 -06:00
Neil Darlow
b81021f475
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-10-21 12:06:56 +01:00
Christian Inci
110c5dcf23
Fixed typo.
...
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2014-10-11 00:25:36 +02:00
Matt Stultz
ca30aee903
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 00:16:27 -04:00
Erik van der Zalm
0f2e0525df
Merge pull request #1096 from thinkyhead/set-home
...
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
Matthew Schick
fb34265d75
Make hotend optional when compiling with lcd support
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-10-06 00:19:07 -04:00
Scott Lahteine
2f6c57eadc
Proposed feature: Set Home Offsets
...
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
2014-10-05 13:35:45 -07:00
Neil Darlow
1632e5e38a
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-09-04 12:21:35 +01:00
Erik van der Zalm
018b68a5c4
Merge pull request #976 from cocktailyogi/SCARA_by_Yogi
...
Implemented SCARA-Maths
2014-08-28 16:32:52 +02:00
Erik van der Zalm
dde61d8886
Merge pull request #977 from OskarLinde/Marlin_v1
...
Fix lcd itostr3() to handle negative numbers
2014-08-28 16:31:53 +02:00
Neil Darlow
3cd7dbcc45
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-30 13:01:52 +01:00
cocktailyogi
2f4a20257c
imported last Marlin changes
2014-07-20 13:49:26 +02:00
daid
aacff0d361
Merge pull request #948 from Dim3nsioneer/Marlin_v1
...
Implementation of FW extruder change retract
2014-07-18 16:10:15 +02:00
Neil Darlow
3f2c771d90
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-07 18:17:15 +01:00
Pablo Clemente
2242a84218
Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965
2014-07-01 16:45:03 +02:00
Neil Darlow
6e3406d228
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-01 10:27:39 +01:00
Pablo Clemente
d86c3cf43c
Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too.
2014-06-30 15:12:13 +02:00
Oskar Linde
269a068032
Fix lcd itostr3() to handle negative numbers
2014-06-24 14:31:15 +02:00
cocktailyogi
512f2a3136
restore Branch from Backup
...
sorry for that
2014-06-23 17:09:57 +02:00
Pablo Clemente
cd3220d055
Inverted state logic for forced_heating_stop variable
2014-06-13 08:39:58 +02:00
Pablo Clemente
86b4b805d2
Fixed stop print LCD function on M104
2014-06-12 18:43:16 +02:00
