Scott Lahteine
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-18 05:14:43 -06:00
Scott Lahteine
49d562d23d
Merge pull request #5855 from thinkyhead/rc_followup_5840
...
Apply DISTINCT_E_FACTORS to sync_from_steppers
2017-02-18 04:51:01 -06:00
Scott Lahteine
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08
Optimize M600 heater status LCD items
2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd
Commentary / style in gcode_M600
2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f
Tweak config ordering for M600
2017-02-18 00:01:31 -06:00
Scott Lahteine
7fdc620ef7
Merge pull request #5850 from thinkyhead/drop_some_comments
...
Remove some old code comments
2017-02-17 16:45:44 -06:00
Scott Lahteine
284d6de9da
Remove some old code comments
2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a
Fix steps_to_mm for active extruders
2017-02-15 21:45:39 +01:00
Scott Lahteine
babe1d211c
Merge pull request #5794 from thinkyhead/rc_m600_improve
...
M600 wait for heatup, prevent stepper timeout, etc.
2017-02-15 05:38:06 -06:00
Scott Lahteine
4578c573fe
Pause the print job timer while in M600
2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794
Simplify filament_change_beep function
2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316
Use a short name for the filament "endstop"
2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87
Spacing, coding standards
2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679
Apply M600 updates to all configs
2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
Scott Lahteine
58b8e0cae7
Merge pull request #5837 from thinkyhead/rc_fix_mbl_homing
...
Fix broken homing in MBL
2017-02-15 04:48:30 -06:00
Tannoo
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb
Parenthesize some menu defines for safety
2017-02-14 23:12:27 -06:00
Scott Lahteine
20ef0a6e27
Merge pull request #3152 from thinkyhead/sd_alpha_sort
...
SD files alphabetical sort in LCD menus
2017-02-14 21:48:57 -06:00
Scott Lahteine
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381
Reduce / optimize LIN_ADVANCE code
2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
2017-02-12 04:11:51 -06:00
jes
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8
Give encoder pulse/steps conditionals their own block
2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06
No space after X: or A: in M114 output
2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
2017-02-11 23:55:56 -06:00
Scott Lahteine
c64ecf95e2
Merge pull request #5808 from thinkyhead/rc_delta_float_radius
...
Cast DELTA_PRINTABLE_RADIUS to float in sq()
2017-02-11 23:43:46 -06:00
Scott Lahteine
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 22:54:22 -06:00
Scott Lahteine
6dac1fe07e
Merge pull request #5701 from tohara/RCBugFixCmake
...
Updated CMakeLists
2017-02-09 22:45:05 -06:00
Scott Lahteine
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a
Default DAC values for RigidBoard V2
2017-02-09 22:39:00 -06:00
Scott Lahteine
fb11e52cd2
Merge pull request #5787 from thinkyhead/rc_bob_pins_added
...
pinsDebug for 644/1284 & USB646/1286 families
2017-02-09 15:07:55 -06:00
