Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
0554b65d22
Merge pull request #4284 from thinkyhead/rc_serial_ln_macros
...
Sled-probe sanity fix, conditionals for remaining types of leveling
2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f
Move delta ABL sanity checks up
2016-07-12 16:10:16 -07:00
Scott Lahteine
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
2016-07-11 10:22:19 -07:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
Petr Zahradnik
a2159cfbc3
Error message change in SanityCheck.h
2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153
Runout sensor without SD Card
2016-07-09 17:57:53 -07:00
AnHardt
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
2016-07-07 16:37:22 -07:00
Scott Lahteine
d7e9647505
Sanity Check for probe raises
2016-07-06 13:46:06 -07:00
AnHardt
16c83d203b
Make use of the good features of a sled probe for all probes.
...
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().
Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.
Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
2016-07-06 04:11:04 +02:00
Petr Zahradnik
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
2016-07-02 15:34:33 -07:00
Scott Lahteine
dbfc87cdcf
Squish sanity check for build info
2016-07-02 15:22:33 -07:00
Scott Lahteine
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
2016-06-23 14:33:29 -07:00
Scott Lahteine
bd01592816
Goodbye MECHANICAL_PROBE
2016-06-22 17:13:33 -07:00
Scott Lahteine
42ce60c5cc
Make sure NUM_SERVOS is set for Z servo endstop
2016-06-22 14:01:19 -07:00
Scott Lahteine
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
2016-06-22 02:45:25 -07:00
esenapaj
14b661b9e5
Enclose #error string by double-quotes
2016-06-21 21:06:14 +09:00
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
2016-06-21 01:56:40 -07:00
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
2fd2301928
FILRUNOUT => FIL_RUNOUT
2016-06-19 19:25:26 -07:00
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
2016-06-19 18:47:27 -07:00
Scott Lahteine
add0032820
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
2016-06-19 18:13:33 -07:00
Scott Lahteine
1bed392c68
HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP
2016-06-17 14:20:17 -07:00
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
2016-06-17 14:19:17 -07:00
Scott Lahteine
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
2016-06-15 22:09:47 -07:00
João Brázio
8ccd97e7cc
Updated all example configuration files
2016-06-12 00:36:15 +01:00
João Brázio
de8108648f
Added a versioning system to the config files
2016-06-11 23:48:10 +01:00
Scott Lahteine
6d62a4ffc8
Patch LIN_ADVANCE for style and forward-compatibility
2016-06-09 21:03:27 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
32f8300cc6
Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast
...
Improved LCD contrast handling
2016-06-03 17:08:41 -07:00
Scott Lahteine
b3a37b493d
Patch G28 servo stow to use Conditionals, raise_z_after_probing
2016-06-02 16:56:49 -07:00
Scott Lahteine
b703fa9538
Add sanity check for SAV_3DGLCD display types
2016-06-02 15:21:17 -07:00
Scott Lahteine
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
2016-05-26 18:50:43 -07:00
Scott Lahteine
6c7f4909b1
COREYZ Conditionals, SanityCheck for only a single kinematic
2016-05-23 13:58:40 -07:00
Scott Lahteine
92ac133f2b
Conditionals and Sanity Check for SINGLENOZZLE
2016-05-20 15:48:27 -07:00
Scott Lahteine
2a7b1a85f7
Improve DUAL_X_CARRIAGE sanity check errors
2016-05-18 15:59:28 -07:00
esenapaj
e2b87f6c85
Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
Scott Lahteine
ddf3e1e22d
Tweaks to some verbiage
2016-05-14 15:06:09 -07:00
Scott Lahteine
a713043acd
Merge pull request #3749 from esenapaj/patch-3
...
Enclose all #error strings by double-quotes
2016-05-14 15:01:56 -07:00
João Brázio
d7522152e1
Warn user about useless of individual axis homing and DELTA kinematics
2016-05-14 01:35:05 +01:00
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
2016-05-13 21:10:23 +09:00
Scott Lahteine
c827671299
Mention Z_PROBE_ALLEN_KEY in probe sanity checks
2016-05-10 13:50:20 -07:00
Scott Lahteine
ea1dd31851
Enclose #error strings with apostrophes in quotes
2016-05-08 18:08:39 -07:00
Scott Lahteine
15fc93d742
Cleanup and consolidate probe conditionals for clarity
2016-05-08 12:59:43 -07:00
Scott Lahteine
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
2016-04-27 20:06:40 -07:00
Scott Lahteine
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
2016-04-27 20:06:40 -07:00
João Brázio
170f7e8a45
Rework Marlin's versioning system
2016-04-24 05:21:17 +01:00
Scott Lahteine
aaf9d19954
Allow Z_SAFE_HOMING to compile without a probe
2016-04-21 15:55:49 -07:00
Scott Lahteine
1cc622b167
Fix minor spelling in comments
2016-04-14 20:06:59 -07:00
