Victor Oliveira
cfad5cb435
Unify FYSETC F6 1.3 / 1.4 ( #20507 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-22 06:57:11 -06:00
Serhiy-K
0b3b4da7d0
STM32F1xx support for TFTGLCD ( #20515 )
2020-12-22 06:56:00 -06:00
Keith Bennett
a0c8d348a0
Anet ET4 / ET4P and Anet TFT28 / TFT35 ( #20280 )
2020-12-22 06:51:29 -06:00
Sean McGroty
08dcd1f680
Creality v4.3.1 (Ender 6) board ( #20512 )
2020-12-22 06:25:12 -06:00
X-Ryl669
91730d71ff
Improve Touch Calibration screen ( #20524 )
2020-12-22 06:17:06 -06:00
Jason Smith
5e3be83dbb
Overrides to prevent STM32 timer conflicts ( #20545 )
2020-12-22 06:02:25 -06:00
Chris Pepper
c1b900aae9
Fix UBL mesh inset Z position ( #20538 )
2020-12-22 05:59:25 -06:00
Jason Smith
094e822070
Improve STM32 timer conflict messages ( #20544 )
2020-12-22 05:49:34 -06:00
LinFor
82540be931
FTDI EVE custom user menus ( #20518 )
2020-12-22 00:31:14 -06:00
LinFor
36aff1e464
12-bit ADC resolution for STM32 ( #20519 )
2020-12-21 18:30:03 -06:00
thinkyhead
ba1176108a
[cron] Bump distribution date (2020-12-22)
2020-12-22 00:19:00 +00:00
LinFor
9b3e16cdd0
Add Tune -> Advanced Settings to FTDI EVE ( #20532 )
2020-12-21 18:06:27 -06:00
Scott Lahteine
34b6bca006
Tweak FTDI spacing
2020-12-21 17:48:03 -06:00
Scott Lahteine
6429be6efc
Robin pins followup
2020-12-21 17:47:22 -06:00
LinFor
ba16c53218
Fix some Russian ( #20529 )
2020-12-21 17:45:00 -06:00
cr20-123
0d95f67f2e
Fix G34 compile with bed leveling disabled ( #20537 )
2020-12-21 17:43:45 -06:00
Sebastiaan Dammann
3ec59b36eb
Add BTT SKR CR6 board ( #20522 )
2020-12-21 17:36:43 -06:00
Scott Lahteine
c7ecfe28e7
Clean up some pins
2020-12-21 17:36:43 -06:00
Dick Streefland
7afd274d0c
Apply HOME_AFTER_DEACTIVATE for 'G28 O' ( #20525 )
2020-12-21 01:49:00 -06:00
Dick Streefland
71bec0824c
Get E3V2 DWIN MACHINE_SIZE
from config ( #20526 )
2020-12-21 01:47:49 -06:00
thinkyhead
4764e2c544
[cron] Bump distribution date (2020-12-21)
2020-12-21 00:17:17 +00:00
Serhiy-K
d8687512b1
Update Russian and Ukrainian languages ( #20508 )
2020-12-20 00:33:23 -06:00
Scott Lahteine
62cc65cafe
Languages cleanup
2020-12-20 00:30:20 -06:00
Foxies
0a99f8feed
Migrate Hispeedv1 (QQS-Pro) to HAL/STM32 ( #20354 )
2020-12-20 00:17:24 -06:00
Jason Smith
6dfcd491d0
Fix Creality EEPROM watchdog freq. ( #20510 )
2020-12-19 23:55:57 -06:00
InsanityAutomation
2963229dfa
Probe Tare, Probe Activation Switch ( #20379 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-19 22:11:43 -06:00
InsanityAutomation
7a168205eb
Minimum temp options for Probing and G12 Nozzle Clean ( #20383 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-19 22:02:38 -06:00
Keith Bennett
9a8f8f8284
Let boards set Default TMC Slave Addresses ( #20498 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-19 21:48:31 -06:00
thinkyhead
57f4d0523e
[cron] Bump distribution date (2020-12-20)
2020-12-20 00:14:49 +00:00
Scott Lahteine
45b11553f4
Tweaks for pins_BTT_SKR_common.h
2020-12-18 21:15:48 -06:00
Scott Lahteine
e5d0b27aaf
Rename QUIET_PROBING
2020-12-18 21:13:50 -06:00
thinkyhead
a33ae10c56
[cron] Bump distribution date (2020-12-19)
2020-12-19 00:15:28 +00:00
Tanguy Pruvot
017d97fd0e
DOGM: Slow down touchscreen calibration ( #20454 )
2020-12-18 16:21:00 -06:00
Victor Oliveira
b167cd2427
MKS Robin Nano V3 and STM32F4x0Vx Variant ( #20430 )
2020-12-18 16:18:04 -06:00
thinkyhead
fae3c860a1
[cron] Bump distribution date (2020-12-18)
2020-12-18 00:15:25 +00:00
grauerfuchs
e9677594ea
Fix and optimize MightyBoard ( #20493 )
2020-12-17 17:22:59 -06:00
Jason Smith
7b9ff164cc
Balance CI tests ( #20485 )
2020-12-17 06:18:07 -06:00
nb-rapidia
978d93af88
Make M220 B / R a standard feature ( #20355 )
2020-12-17 06:13:07 -06:00
ellensp
31337826a3
Fix ZoneStar LCD 2004 buttons ( #20489 )
2020-12-17 06:05:25 -06:00
rafaljot
fbcc07261d
Homing feedrates as XYZ array ( #20426 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-17 06:02:05 -06:00
Scott Lahteine
20b3af1cc2
Use homing_feedrate function
2020-12-16 22:19:04 -06:00
thinkyhead
6d47baee5d
[cron] Bump distribution date (2020-12-17)
2020-12-17 00:15:48 +00:00
Tanguy Pruvot
c6dcf9d006
Update French language ( #20472 )
2020-12-16 00:46:10 -06:00
Scott Lahteine
f934b774a1
Update Hungarian language
...
Co-Authored-By: Zs.Antal <45710979+AntoszHUN@users.noreply.github.com>
2020-12-16 00:42:55 -06:00
Giuliano Zaro
e6fdf530b8
Update Italian language ( #20480 )
2020-12-16 00:35:13 -06:00
thinkyhead
1c4f125cb0
[cron] Bump distribution date (2020-12-16)
2020-12-16 00:14:09 +00:00
Scott Lahteine
3f93b8baed
Trust STM32 gcc versions
2020-12-15 01:06:32 -06:00
Scott Lahteine
637123f340
Update some LCD includes
2020-12-15 01:06:27 -06:00
Scott Lahteine
7243ea549d
Update some pins errors
2020-12-15 00:49:55 -06:00
Sebastiaan Dammann
686bb056a4
Creality v4.5.3 (CR-6 SE, CR-6 MAX) ( #20468 )
2020-12-15 00:33:01 -06:00
JoAnn Manges
1be16e3d8c
Fix RESTORE_LEVELING_AFTER_G28 ( #20471 )
2020-12-15 00:16:50 -06:00
Scott Lahteine
69999f962a
Please install the EditorConfig plugin
2020-12-14 21:27:12 -06:00
Scott Lahteine
5a6fc3e5b7
Auto-check followup
2020-12-14 21:08:09 -06:00
kisslorand
7be57ff9f0
Fix M1001 auto-check logic ( #20456 )
2020-12-14 21:04:45 -06:00
Scott Lahteine
80bde7b6b5
Always enable leveling after G28
2020-12-14 20:34:22 -06:00
Scott Lahteine
e349a44c60
Preheat before leveling
2020-12-14 20:34:22 -06:00
Scott Lahteine
fbefe55102
Fix formatting
2020-12-14 20:34:22 -06:00
thinkyhead
dee475cee1
[cron] Bump distribution date (2020-12-15)
2020-12-15 00:13:55 +00:00
Chris Pepper
9fd358f10c
LPC176x framework update ( #20469 )
2020-12-14 22:36:25 +00:00
thinkyhead
8c05053951
[cron] Bump distribution date (2020-12-14)
2020-12-14 00:14:07 +00:00
Scott Lahteine
b0392be4bf
SHORT_MANUAL_Z_MOVE => FINE_MANUAL_MOVE
2020-12-13 01:54:31 -06:00
Scott Lahteine
c824086825
Adjust planner debugging
2020-12-13 01:54:31 -06:00
FanDjango
1a9644cef9
Probe Offset Wizard followupBack to PROBE_PT_RAISE/separate STOW, make "PROBING" msg appear ( #20439 )
...
* Go back to always use PROBE_PT_RAISE with a discrete stow. This ensures a raise above the bed, while stowing prior to exiting the wizard.
* Fix issue preventing text while moving to X/Y position
Co-authored-by: FanDjango <FanDjango@users.noreply.github.com>
2020-12-12 17:18:33 -08:00
thinkyhead
8723440d1d
[cron] Bump distribution date (2020-12-13)
2020-12-13 00:14:25 +00:00
qwewer0
ea9b4dc82c
Improve ASSISTED_TRAMMING_WIZARD probe stowing ( #20437 )
...
* When BLTOUCH_HS_MODE enabled, stow pin before user interaction
* For all probes, ensure probe stows at end of wizard
2020-12-12 11:03:28 -08:00
ellensp
2eab920935
Add HAS_PIN_27_BOARD for CREALITY_V4 ( #20446 )
...
Co-authored-by: ellensp <ellensp@hotmsil.com>
2020-12-12 10:59:17 -08:00
leodoener
087a6fea13
Fix SDCARD_SORT_ALPHA on Ender 3 V2 ( #20443 )
2020-12-11 23:20:24 -03:00
Scott Lahteine
9c9113e225
Better animated boot screen
2020-12-11 18:24:27 -06:00
thinkyhead
8f008ac75d
[cron] Bump distribution date (2020-12-12)
2020-12-12 00:13:47 +00:00
FanDjango
43222d5879
Probe offset wizard fixes ( #20414 )
...
* STOW probe, reverting incorrect earlier change from #20344
* Adjust soft endstop disables, to ensure travel below bed functions properly
Co-authored-by: FanDjango <FanDjango@users.noreply.github.com>
2020-12-11 00:06:57 -08:00
elasticdotventures
04a3bd0d34
Z_SENSORLESS sanity checks ( #20421 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-10 23:33:29 -08:00
thinkyhead
af70e80816
[cron] Bump distribution date (2020-12-11)
2020-12-11 00:13:48 +00:00
ellensp
22de37ad50
Fix UBL Debug Messages ( #20423 )
...
Co-authored-by: ellensp <ellensp@hotmsil.com>
2020-12-10 15:30:58 -03:00
Keith Bennett
6cf4b888e1
Clarify "not Interrupt-capable" error message ( #20419 )
2020-12-10 15:27:02 -03:00
thinkyhead
6557751199
[cron] Bump distribution date (2020-12-10)
2020-12-10 00:13:42 +00:00
Victor Oliveira
6e4925e6b6
MKS Robin Pins fixes for STM32 and STM32F1 ( #20404 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-09 18:43:49 -03:00
InsanityAutomation
3404cb1fc4
Move ExtUI ABL mesh edit, limit to bilinear ( #20381 )
...
* Move ExtUI call
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Sebastiaan Dammann <sebastiaandammann@outlook.com>
2020-12-09 09:07:26 -08:00
Marcio T
f3bddc4e4e
Fixes and additions to FTDI EVE Touch UI ( #20393 )
...
- Fixed name conflict with "SUBSCRIPT_TWO"
- Fixed rendering bugs in "Leveling Menu"
- Only show "Bed Mesh Screen" when UBL is enabled
- Removed CocoaPress code from generic "Main Menu"
- Removed CocoaPress code from LulzBot Bio "Status" screen
- Moved generic "Move Axis" functionality into a base class
- Added CocoaPress custom screens:
- Status Screen
- Unload Cartridge
- Load Chocolate
- Main Menu
- Advanced Settings
- XYZ Move (based on "Move Axis" base class)
- Extrusion Move (based on "Move Axis" base class)
- CocoaPress tweaks to "Temperature" screen
- Fix FTDI EVE Touch UI compilation errors when not using leveling.
2020-12-09 05:09:31 -06:00
Mike La Spina
3e68e4b418
Fix Spindle/Laser Control menu ( #20347 )
2020-12-09 04:37:26 -06:00
swissnorp
edb2a83e71
Allow positive Z nozzle to probe offset ( #20344 )
...
* Allow a positive value for z offset from nozzle to probe without sanity checks
* Simplify menu_probe_offset.cpp (HOMING_Z_WITH_PROBE)
* Add some more explanation to Configuration Files
* Raise after probe_at_point as if homed
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-09 01:06:50 -08:00
Scott Lahteine
885b0d2ec5
Style, spacing, typo cleanup for recent changes
2020-12-08 20:18:29 -06:00
thinkyhead
66834cf324
[cron] Bump distribution date (2020-12-09)
2020-12-09 00:13:32 +00:00
Victor Oliveira
9ead6a30f2
SPI TFT for STM32F4 boards ( #20384 )
...
* fix pinsDebug for F1 boards
* add MKS Robin PRO V2 board - development board
* tft spi working with F4 boards
* pins formating
* sanity check for TFT on supported cores in STM32
* Fix tabs/spaces in pins file
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-07 21:26:39 -08:00
thinkyhead
af20db4512
[cron] Bump distribution date (2020-12-08)
2020-12-08 00:13:33 +00:00
ellensp
fee375f31f
Allow BTT EXP-MOT be used with Displays that needs only EXP 1 ( #20396 )
...
Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
2020-12-07 17:57:00 -03:00
ellensp
182fdd95c3
Shorten Filament Load/Unload Strings to Fit on Graphical Displays ( #20369 )
...
Co-authored-by: ellensp <ellensp@ellensp-HP-ProBook-6470b.fritz.box>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
2020-12-07 17:53:53 -03:00
Scott Lahteine
7f20184ebc
Fix auto#.g file handling, add NO_SD_AUTOSTART ( #20071 )
2020-12-07 05:53:15 -06:00
Scott Lahteine
b04914fb72
More LPC P-string macros
2020-12-07 05:06:24 -06:00
Scott Lahteine
2ecb4fad72
Watch idle() depth over 5
2020-12-07 04:38:14 -06:00
Scott Lahteine
ee4c2b36b8
Fix fileExists, use openFailed
2020-12-07 04:38:14 -06:00
thinkyhead
00143f77d0
[cron] Bump distribution date (2020-12-07)
2020-12-07 00:13:45 +00:00
Scott Lahteine
6f4589b375
G28 followup
2020-12-05 23:06:15 -06:00
Scott Lahteine
139a33c9fc
G28 tweaks
2020-12-05 20:14:44 -06:00
Scott Lahteine
a3f6e48eb6
Fix STM32F1 SERIAL_GET_TX_BUFFER_FREE
2020-12-05 20:05:39 -06:00
Scott Lahteine
a8dffdebd4
Move G29 3-point startup earlier
2020-12-05 20:05:39 -06:00
Scott Lahteine
889695b6ba
ExtUI homing / leveling additions
2020-12-05 18:29:03 -06:00
Scott Lahteine
bf4c08bce1
Use 'nearby' for 'near'
2020-12-05 18:27:18 -06:00
Scott Lahteine
9e68c9a214
Creality 4.5.2 format and fix
2020-12-05 18:27:18 -06:00
LinFor
7a6b742d12
Fix FYSETC S6 I2C EEPROM size ( #20340 )
...
Both V1.2 and V2.0 boards have a 24LC16, which is a 2kB EEPROM.
Co-authored-by: PingWin <kirill@shashlov.ru>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-05 16:19:17 -08:00
thinkyhead
2dbd2063f8
[cron] Bump distribution date (2020-12-06)
2020-12-06 00:13:51 +00:00