Damien Martin-Guillerez
b1e3f4f42f
Add support for the V3 of the BlTouch ( #13596 )
...
V3 of the BLTouch has an [Alarm Release & Touch mode](https://docs.wixstatic.com/ugd/f5a1c8_77037f55e5d542309d9fc178165c9f3f.pdf ) to activate after the probe is deployed. If this mode isn't activated, the BLTouch keeps deploying, ends up detecting a collision and gets itself in error mode.
Tested on a Creality Ender-3.
2019-04-06 19:48:44 -05:00
Ondřej Nový
c0a6f013de
[1.1.x] Level bed corners Z-hop height option ( #12859 )
2019-01-10 19:25:02 -06:00
swilkens
feb2165feb
[1.1.x] Correct Ender 3 bed size ( #12768 )
2018-12-30 10:42:06 -06:00
swilkens
82c5c85c0f
[1.1.x] Reduce HOMING_FEEDRATE_XY for Ender 3 ( #12104 )
...
Homing on the Ender 3 with `HOMING_FEEDRATE_XY` set to 50*60 was shown (#12074 ) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
2018-10-16 01:51:14 -05:00
Scott Lahteine
5b8dc39506
[1.1] Fix mixing extruder g-codes ( #11864 )
2018-09-18 00:44:34 -05:00
Scott Lahteine
da5e69693d
Update some config comments
2018-09-15 23:17:59 -05:00
teemuatlut
b4efefea8b
[1.1.x] Fix TMC2208 SW serial communication ( #11548 )
...
* New TMC2208 constructor
* Update default driver configuration
2018-08-14 18:44:17 -05:00
Giuliano
e5b928f574
[1.1.x] Typo fix ( #11366 )
...
Typo fix
2018-07-25 18:00:28 -05:00
Scott Lahteine
6d6bdc6517
Add *_DRIVER_TYPE to example configs
2018-07-25 02:39:16 -05:00
Scott Lahteine
ed0e72bf44
Fix spelling in configs
2018-07-24 21:02:22 -05:00
Scott Lahteine
221e8bbb05
Add MANUAL_PROBE_START_Z to example configs
2018-07-18 21:50:18 -05:00
Scott Lahteine
8f110190eb
Add Z_CLEARANCE_MULTI_PROBE to example configs
2018-07-12 22:27:06 -05:00
Scott Lahteine
fc9f4ce2c0
Fix missing quote in language list
...
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
2018-07-04 13:40:18 -05:00
Marcel Schulz
432da42dba
Add thermistor 501 (100K Zonestar)
2018-07-03 18:10:55 -05:00
Scott Lahteine
b7ddfddf51
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-06-10 01:56:00 -05:00
Scott Lahteine
949ee7afe9
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
2018-05-26 18:31:57 -05:00
Scott Lahteine
e63113e6ad
Add ENDSTOP_NOISE_FILTER to example configs
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-21 15:29:14 -05:00
Scott Lahteine
f093ce35a0
Add BEZIER_JERK_CONTROL to example configs
2018-05-08 09:21:54 -05:00
Scott Lahteine
5735c8af5b
[1.1.x] Arrange LCD options by type ( #10631 )
...
* Bump configuration versions to 010109
* Arrange LCD options by type
2018-05-06 19:17:29 -05:00
Scott Lahteine
675be8db7c
Bring some example configs up to date
2018-05-06 03:06:13 -05:00
Scott Lahteine
b50afa9897
Add thermocouple with AD8495 support
...
Co-Authored-By: Dmitriy <demonx@demonx.ru>
2018-05-02 08:41:31 -05:00
Scott Lahteine
04183da302
Add Ender-3 configs ( #10588 )
...
Co-Authored-By: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
2018-05-01 06:20:35 -05:00
