Christian Thalhammer
b5fae1104b
fixed sUICIDE_PIN disable
2012-02-07 08:50:26 +01:00
Bernhard
157aa7f2fd
m115 eol fix
2012-01-15 20:51:49 +01:00
Bernhard
7aeb45303d
small mistake
2012-01-15 18:31:21 +01:00
Bernhard
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
2012-01-15 17:06:10 +01:00
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b
header file simplification
2011-12-22 12:38:50 +01:00
Bernhard
212515148e
added m240 photography support. default off
2011-12-22 12:11:39 +01:00
Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
2011-12-15 11:59:07 +01:00
Erik van der Zalm
617968ab76
G92 fix
2011-12-12 20:43:47 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
2011-12-11 22:18:50 +01:00
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
2011-12-11 15:42:56 +01:00
Bernhard Kubicek
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-09 06:37:42 -08:00
Bernhard
dde4b40fa9
disable steppers in runout prevention
2011-12-09 15:37:24 +01:00
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
2011-12-09 15:09:52 +01:00
Bernhard
aa4f9a6474
better values.
2011-12-09 14:09:34 +01:00
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
2011-12-09 13:56:28 +01:00
Bernhard
1ec0c3b68a
extruder runout prevention.
2011-12-09 13:39:00 +01:00
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
2011-12-09 12:51:08 +01:00
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-08 12:25:32 +02:00
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
2011-12-07 20:56:47 +01:00
Bernhard
460b788d78
repaired homing position setting.
2011-12-07 20:54:34 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Bernhard
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2011-12-04 22:27:37 +01:00
Bernhard
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
2011-12-04 22:26:42 +01:00
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
2011-12-04 20:17:21 +01:00
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
2011-12-04 09:48:53 +01:00
Bernhard
4f909963e4
make QUICKHOME configureable
2011-12-04 09:02:09 +01:00
Bernhard
b0c3871750
more fixing of the sanguino math round problem
2011-11-30 09:07:56 +01:00
Bernhard
716e89b87c
first homing move diagonal towards home switches.
2011-11-29 22:11:45 +01:00
Bernhard
e4ab0e5982
more inlines
2011-11-28 22:11:17 +01:00
Bernhard
8cb29921a0
possible stepper release after sd printing
2011-11-28 22:09:17 +01:00
Bernhard
044886b4a0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2011-11-28 21:52:16 +01:00
Erik van der Zalm
6d95644c0d
Moved M88 into M84. (M84 E)
2011-11-28 21:49:54 +01:00
Bernhard
311627141b
Merge branch 'smallopt' into Marlin_v1
...
Conflicts:
Marlin/temperature.h
2011-11-28 21:36:01 +01:00
Erik van der Zalm
7216a12856
Disabled M88 for boards that don't have seperate enable pins.
2011-11-28 21:17:06 +01:00
Erik van der Zalm
98805c9228
Added M88 command. (Request from Action68)
2011-11-28 20:51:01 +01:00
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
2011-11-27 21:12:55 +01:00
Bernhard
2d9a715655
first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.
2011-11-27 17:27:17 +01:00
Bernhard
d2f034ba84
lcd message from gcode, m117
2011-11-27 16:53:11 +01:00
Erik van der Zalm
aad4b75b94
First parts 2nd extruder
2011-11-26 17:33:25 +01:00
Bernhard
a0dc66f7bf
Home retract distance configureable per axis.
2011-11-26 12:04:06 +01:00
Bernhard
4d6a5c29df
disable steppers as routine in stepper.cpp
2011-11-26 11:50:23 +01:00
Bernhard
74d0032e25
cooldown blocking selectable by #define.
2011-11-26 09:03:12 +01:00
Bernhard
57e163e989
typo
2011-11-25 22:34:12 +01:00
Bernhard
b58787a367
now velocities are also set in mm/sec in gcode.
2011-11-25 22:32:26 +01:00
Erik van der Zalm
6ac9b2e761
Fixed residency time bug. (Thanks to Sound :-) )
2011-11-25 19:34:36 +01:00
Erik van der Zalm
0e0e4945d8
Removed ISR overtaken message from ISR routine
2011-11-25 13:59:58 +01:00
