Scott Lahteine
bd20bd5444
Merge pull request #2063 from chris-bo/autobed_sled
...
improve sled handling
2015-05-12 03:29:21 -07:00
Christian Bohn
f48599f172
add pin definition to some motherboards
2015-05-12 10:02:23 +02:00
Scott Lahteine
b5200e184c
Remove extra setup_for_endstop_move
2015-05-12 01:01:53 -07:00
Scott Lahteine
8d814de558
Return void in prevent_dangerous_extrude
2015-05-12 00:55:00 -07:00
Scott Lahteine
367e2eb9f4
Global setup_for_endstop_move
2015-05-12 00:51:22 -07:00
Scott Lahteine
fa951f8a0b
Always do st_synchronize() before G28
2015-05-12 00:31:51 -07:00
Christian Bohn
27a3b1d895
disable sled pin by default
2015-05-12 08:51:01 +02:00
Christian Bohn
fb44b53ae3
sled improvements
...
- create sled pin definition
- G28 Works with sled
2015-05-11 23:22:19 +02:00
Scott Lahteine
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
2015-05-10 23:10:25 -07:00
Wurstnase
526ad82d20
activate advanced_ok and no_timeout
2015-05-11 08:01:51 +02:00
Scott Lahteine
4097207c75
Merge pull request #2041 from thinkyhead/watch_temp
...
More thermal protection
2015-05-10 21:39:05 -07:00
Scott Lahteine
9b3d4380d3
Only watch the heater that was set
2015-05-10 20:26:45 -07:00
Scott Lahteine
f73f4ce555
Make some z probe and servo code tweaks
2015-05-09 19:11:19 -07:00
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
2015-05-08 22:36:02 -07:00
Wurstnase
0cb87795a3
advanced 'ok'
...
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.
Some pseudo code:
If (bufferremaining > 0) send command
## as long there is free buffer send command
Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
2015-05-08 22:28:51 +02:00
Wurstnase
182e0d99c9
Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait
2015-05-08 21:27:18 +02:00
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
2015-05-08 04:39:59 -07:00
Scott Lahteine
79633a74ab
Fix MBL compile error
2015-05-06 14:25:13 -07:00
Scott Lahteine
777f2d3820
Merge pull request #2018 from fmalpartida/bugFixing
...
Bug corrected: persistent HOMING message when HOME button pressed for homing.
2015-05-05 00:12:32 -07:00
Scott Lahteine
ecb46de349
Merge pull request #2013 from bq/Fix_lowercase
...
Fixed lowercase change missing on commit a22a228b
2015-05-04 23:50:56 -07:00
fmalpartida
150a35eff8
Bug corrected:
...
Persistent homing message.
Message was declared as an alert, therefore it was persistent.
Updated to message.
2015-05-04 19:48:49 +02:00
Gina Häußge
ab246ab032
Reverting changes to error messages on serial console
...
This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f
2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera
59529b755d
Fixed lowercase change missing on commit a22a228b.
...
Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.
2015-05-04 09:44:34 +02:00
Scott Lahteine
1f039cde61
Merge pull request #1992 from thinkyhead/too_many_probes
...
Stow Z probe on M402 without extra raise
2015-05-03 20:40:26 -07:00
Scott Lahteine
ca8cec8e8a
Merge pull request #1998 from paclema/Filament_runout_fix
...
Fixed sintaxis error of filament runout
2015-04-29 19:53:25 -07:00
Scott Lahteine
d4c74b8f8c
Don't apply M428 if an error occurs
...
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
2015-04-29 19:05:48 -07:00
Scott Lahteine
d065d37822
Add M428 to set home_offset logically
2015-04-29 18:26:16 -07:00
paclema
013a09dbe6
Added configurable script for filrunout form configuration.h
2015-04-29 21:38:40 +02:00
paclema
4dcc0fd55a
Fixed sintaxis error of filament runout
2015-04-29 21:32:27 +02:00
Scott Lahteine
ce3caf447b
Tweak how homeaxis deploys and stows
2015-04-28 19:17:48 -07:00
Scott Lahteine
a235dca79c
Stow z on M402 without extra raise
2015-04-28 19:10:07 -07:00
Scott Lahteine
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
2015-04-27 22:35:41 -07:00
Scott Lahteine
31516e2a3b
Merge pull request #1985 from Arengorn/Development
...
Update of servo.h
2015-04-27 22:10:02 -07:00
Scott Lahteine
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
2015-04-27 21:47:47 -07:00
Scott Lahteine
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
2015-04-27 21:41:14 -07:00
Scott Lahteine
71a0b1a5bb
Disable endstops between homing bumps
2015-04-27 21:14:30 -07:00
Scott Lahteine
c36226c4dc
Fix homing Z position
...
Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the
planner position in sync when homing.
2015-04-27 20:55:19 -07:00
Scott Lahteine
ff178d8cf7
Change M421 to take coordinates
...
This makes `M421` more amenable for irregular matrices
2015-04-27 19:48:34 -07:00
Bernardo
ff67ee73fc
Update Marlin_main.cpp
...
Corrected "servo.h" to "Servo.h" because of the updated filename.
2015-04-27 23:29:16 -03:00
Steve Kelly
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
2015-04-27 16:17:30 -04:00
Scott Lahteine
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
2015-04-26 20:56:33 -07:00
Scott Lahteine
d43cc2dd5f
M111 - Debug Level
...
- Add `M111` as a standard option to set the debug level
- Implement `DEBUG_ECHO` in `process_commands`
- Other debug levels (e.g., `DEBUG_DRYRUN`) need more work
2015-04-26 20:08:45 -07:00
Scott Lahteine
a22a228bcc
Rename files to move them in the IDE
2015-04-25 21:04:54 -07:00
Scott Lahteine
0438f0d835
Merge pull request #1924 from thinkyhead/raise_z_for_m401_m402
...
Raise Z for M401 and M402
2015-04-24 22:41:12 -07:00
Scott Lahteine
b275946a52
Merge pull request #1966 from thinkyhead/g4_dwell_message
...
G4 shows status message only if no message is set already
2015-04-24 22:02:37 -07:00
Scott Lahteine
182f2cda35
Minor cleanup of M48
2015-04-24 21:26:36 -07:00
Scott Lahteine
3a6fd912cd
Latest upstream commits, merged
2015-04-24 21:14:13 -07:00
Scott Lahteine
3c9e94e035
Merge pull request #1964 from AnHardt/Max6675again
...
Add variant for MAX6675 in M104
2015-04-24 20:44:45 -07:00
Scott Lahteine
56ff46eb8b
Improve code_has_value test
2015-04-24 20:43:16 -07:00
Scott Lahteine
ce142afdda
G4 shows status message only if no message is set already
...
- Address issue raised in #1961
2015-04-24 20:13:01 -07:00
