Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
Scott Lahteine
b76344c080
More Trinamic cleanup
2018-05-10 00:12:10 -05:00
Scott Lahteine
62e7a9c671
Fix up fwretract handling
2018-05-06 01:24:14 -05:00
Scott Lahteine
bfe223e120
Adjust usage of stepper.synchronize
2018-05-06 01:24:14 -05:00
Roxy-3D
c2c02bdc67
Change Max7219 coordinates to traditional (X,Y)
2018-05-05 16:08:54 -05:00
Scott Lahteine
b337698f96
Additional patch for no heated bed
2018-05-04 00:15:37 -05:00
Scott Lahteine
d7b699ec34
Fewer includes of vector_3.h
2018-05-01 07:05:18 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
59fda986ea
Allow Z_AFTER_PROBING to be 0
2018-04-30 03:25:47 -05:00
Scott Lahteine
8db7fb226a
Fix M420 C for UBL
2018-04-28 08:14:20 -05:00
Scott Lahteine
f83361a814
Apply const to tmc_sensorless_homing
2018-04-27 02:23:10 -05:00
Scott Lahteine
212e52e485
Basic delay for Max7219 on ARM
2018-04-27 00:41:29 -05:00
Karl Andersson
58ca3be1ec
delayMicroseconds() cannot be called in critical section ( #10535 )
...
on the STM32 platform
2018-04-26 14:31:01 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports ( #10524 )
2018-04-25 20:58:00 -05:00
Scott Lahteine
8cc31d1b2e
Cleanup to emergency parser
...
Followup to #10516
2018-04-25 06:54:37 -05:00
Chris Pepper
2242b98248
[LPC176x] Emergency Parser Feature ( #10516 )
2018-04-25 06:44:26 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh ( #10522 )
2018-04-25 06:43:45 -05:00
Scott Lahteine
c82dd5129f
Revert potentially-not-redundant UBL test
...
Response to #10435
2018-04-24 08:04:13 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
2018-04-23 17:13:01 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
...
[2.0.x] Creality3D Power-Loss Recovery
2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks ( #10470 )
...
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
2018-04-22 00:16:30 -05:00
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
2018-04-21 21:56:50 -05:00
Roxy-3D
23635c2b64
Update ubl_motion.cpp
...
Restore necessary and needed loop termination logic.
2018-04-19 12:04:35 -05:00
Scott Lahteine
ad6baa5c9d
Fix for UBL set_bed_leveling_enabled
2018-04-18 00:14:48 -05:00
Scott Lahteine
f57a008c58
Merge pull request #10443 from thinkyhead/bf2_fix_and_improve
...
[2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…
2018-04-17 16:59:31 -05:00
Scott Lahteine
89b1580587
Fix compile error in tmc_status
2018-04-17 16:13:28 -05:00
Scott Lahteine
01b01f6dfd
Tweak fwretract.retract debug, comments
2018-04-17 16:05:25 -05:00
Scott Lahteine
e05c825a05
Update position for UBL non-segmented activate/deactivate
2018-04-17 16:02:02 -05:00
Scott Lahteine
0746aff595
Improve UBL mesh report. Add M420 T, M421 N
2018-04-17 15:52:56 -05:00
Scott Lahteine
3c826e5d05
Prevent delay when power is already on
...
Fix #10410
2018-04-17 04:34:31 -05:00
Scott Lahteine
0945674ba2
Use H0 by default with UBL_MESH_EDIT_MOVES_Z ( #10428 )
2018-04-15 20:49:14 -05:00
Roxy-3D
21f13f9e57
Stow Probe at end of G29 J3
2018-04-13 14:46:47 -05:00
Scott Lahteine
3bc179a16f
Compress/update comments ubl_motion
...
…to fit more code on the screen and correct outdated commentary contrasting ABL.
2018-04-12 18:07:19 -05:00
Luc Van Daele
646aa20b43
Overhaul of G33 Delta Calibration ( #8822 )
2018-04-11 21:14:48 -05:00
Sean
2d9b0a66fe
Add Filament Change accelerations
2018-04-09 23:57:27 -05:00
Roxy-3D
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
2018-04-08 21:26:36 -05:00
Sean
2fa0a73c2c
Implement filament change continuous purge
2018-04-04 20:57:51 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug
2018-04-02 19:33:45 -05:00
Scott Lahteine
9ec2c03c5b
Fix likely error in retract/recover
...
Addressing #10200
2018-03-31 23:01:13 -05:00
Scott Lahteine
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
2018-03-31 22:43:05 -05:00
Scott Lahteine
53f0c7522a
Symmetrical FWRETRACT Z Hop
...
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
2018-03-30 15:54:01 -05:00
Scott Lahteine
ea1a83ce41
Use pgm_read_ptr for tables of pointers
2018-03-23 02:16:35 -04:00
teemuatlut
daf643e1ce
[2.0.x] TMC: Match axis label order ( #10188 )
2018-03-23 01:04:12 -05:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
2018-03-21 19:30:06 -05:00
Roxy-3D
c3c264978f
correct truncated comment
2018-03-21 16:54:45 -05:00
Scott Lahteine
9fd1016bb1
Trust the bootloader to clear globals
2018-03-21 05:49:39 -05:00
Scott Lahteine
bc45fb6b13
Tweak use of move_z_after_probing
2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882
Allow no raise after run_z_probe in probe_pt
2018-03-21 01:24:51 -05:00
Scott Lahteine
ae39fbd646
Also suppress keepalive with suspend_auto_report
2018-03-21 00:29:09 -05:00
Scott Lahteine
8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
...
[2.0.x] More complete Trinamic driver options
2018-03-20 23:14:19 -05:00
teemuatlut
b5b39af531
[2.0.x] TMC: Fix CURRENT_STEP_DOWN ( #10170 )
2018-03-20 15:16:05 -05:00
Scott Lahteine
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
2018-03-19 22:05:16 -05:00
Scott Lahteine
c95450016b
Improve Trinamic support in the EEPROM
2018-03-19 22:05:16 -05:00
Scott Lahteine
48d7036874
Consolidate smart stepper driver initialization
2018-03-19 22:05:16 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 04:11:46 -05:00
Scott Lahteine
978f342392
Reduce some tmc_util strings
2018-03-18 18:58:10 -05:00
Scott Lahteine
c0d694d5d3
Squash UBL postscript comment
2018-03-18 18:58:10 -05:00
Scott Lahteine
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
2018-03-15 22:23:31 -05:00
teemuatlut
e6dcfa64b0
Cast SERIAL_CHAR to void in M122 ( #10086 )
2018-03-14 07:09:06 -05:00
Studiodyne
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
2018-03-14 01:35:30 -05:00
Scott Lahteine
34f656decd
Add TMC2208 include in tmc_util.h
2018-03-14 00:18:40 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
2018-03-11 10:20:50 -05:00
Scott Lahteine
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
2018-03-10 06:57:31 -06:00
Roxy-3D
26dc594ebb
prevent steppers from turning off during manual probes
2018-03-10 00:15:41 -06:00
Scott Lahteine
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
2018-03-09 06:10:11 -06:00
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
2018-03-08 18:56:47 -06:00
Scott Lahteine
ca577c1638
Fix up various spacing, comments, and typos
2018-03-07 21:09:08 -06:00
Scott Lahteine
9515e5aefb
Fix LA_active_extruder (static)
2018-03-07 05:49:20 -06:00
Scott Lahteine
1d604be671
Suspend auto-report during UBL map output
2018-03-07 02:00:19 -06:00
Scott Lahteine
2057177184
Make enums into implicit char
2018-03-06 23:39:56 -06:00
Scott Lahteine
e28e3bb532
Move extended_axis_codes to PROGMEM
2018-03-06 22:21:24 -06:00
Scott Lahteine
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output ( #9969 )
...
Fix #9966
2018-03-06 19:01:07 -06:00
Scott Lahteine
eb867817b5
Prevent filament runout false positives ( #9946 )
2018-03-05 01:49:30 -06:00
Scott Lahteine
beeed580b8
Implement digipots for MKS SBASE ( #9927 )
...
Fix #9477
2018-03-04 15:14:47 -06:00
Scott Lahteine
24b9c1923f
ubl G29 tweaks
2018-02-28 03:40:06 -06:00
Scott Lahteine
7bdb98c946
Fix #9826 . Solution by @gloomyandy
2018-02-26 15:02:19 -06:00
Roxy-3D
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
2018-02-25 23:50:44 -06:00
Scott Lahteine
966d9af98a
Mesh export in Bilinear + UBL M503
2018-02-25 23:25:39 -06:00
Scott Lahteine
2228dff3ea
ubl.h compile flags from 1.1.x
2018-02-25 23:03:08 -06:00
Scott Lahteine
f3dbe19669
Tweaks to HAL codestyle
2018-02-25 04:38:17 -06:00
teemuatlut
5968a3e60e
Add ADVANCED_PAUSE_FEATURE include
2018-02-22 20:28:46 +02:00
teemuatlut
93cc3a8492
Make used methods public
2018-02-22 20:26:14 +02:00
Roxy-3D
d504bbbfa4
Fix botched check for being off the mesh...
2018-02-21 14:28:58 -06:00
Studiodyne
d3ca82d8c2
Support for multiple filament runout sensors
2018-02-19 07:02:50 -06:00
Scott Lahteine
bd54ce830a
Include utility.h in neopixel.cpp
2018-02-16 22:19:34 -06:00
Scott Lahteine
241e55ef3b
Apply SERIAL_FLUSH macro
2018-02-16 17:32:12 -06:00
teemuatlut
749bc42aa9
TMC SGT is int8 ( #9651 )
2018-02-16 02:19:33 -06:00
Bob-the-Kuhn
2d749d490b
Fix / complete USE_CONTROLLER_FAN ( #9666 )
2018-02-16 02:18:50 -06:00
Scott Lahteine
c49844df66
!ENABLED => DISABLED
2018-02-16 01:51:34 -06:00
Scott Lahteine
304e0f8945
Followup to 21e60fd
...
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
2018-02-15 22:24:23 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
2018-02-15 15:07:42 -06:00
Scott Lahteine
8d71ad37cb
flush comment to match 1.1.x
2018-02-14 02:56:18 -06:00
Scott Lahteine
89165326b4
Cleanup after vim and vigor
2018-02-11 06:07:30 -06:00
Scott Lahteine
38c7d53bf7
Repair some spacing
2018-02-10 19:33:26 -06:00
Scott Lahteine
7280fa1e31
Patch Power class
2018-02-10 15:41:18 -06:00
teemuatlut
5990266724
Init CS pins before loading settings ( #9566 )
2018-02-10 14:08:53 -06:00
Scott Lahteine
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
2018-02-09 05:19:33 -06:00
Scott Lahteine
b639f1ad4b
Correct some retract() comments
2018-02-08 17:57:48 -06:00
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 03:57:11 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
2018-02-06 00:22:30 -06:00
Scott Lahteine
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
2018-02-05 19:08:27 -06:00
Scott Lahteine
e5ee0b6f6c
Implement MALYAN_LCD
2018-02-04 18:52:44 -06:00
Scott Lahteine
c46de340b7
Clean up trailing whitespace
2018-02-03 20:05:23 -06:00
Thomas Moore
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
2018-02-03 19:33:26 -06:00
Scott Lahteine
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause
...
[2.0.x] Pause resuming fix
2018-02-01 23:32:24 -06:00
Scott Lahteine
6339b506c0
Make sure binary.h is included as needed
2018-02-01 21:37:35 -06:00
studiodyne
51d080d2c1
Update Pause
2018-01-29 21:57:37 +01:00
Scott Lahteine
2bea1bda56
Move more strings to PROGMEM
2018-01-24 00:06:06 -06:00
Scott Lahteine
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire
...
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
2018-01-23 20:14:02 -06:00
Scott Lahteine
1dcfe193ac
Optimize some serial strings
2018-01-23 19:14:00 -06:00
Thomas Moore
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
2018-01-22 10:21:42 -06:00
Scott Lahteine
b1cd012aa6
Clean up and document load/unload/pause/resume
2018-01-22 05:45:46 -06:00
Scott Lahteine
266086670b
Better LCD message when heating needed
2018-01-22 04:38:37 -06:00
Scott Lahteine
61bf8478a2
Add hotEnough methods
2018-01-22 04:38:37 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:58:41 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
2018-01-18 19:57:18 -06:00
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
2018-01-16 18:00:57 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
2018-01-16 11:08:00 -06:00
Thomas Moore
6856eccc77
Master-only TwoWire class for LPC1768
2018-01-15 05:22:03 -06:00
Scott Lahteine
43d3d024ac
Update tmc_util.cpp
2018-01-15 04:51:59 -06:00
Panayiotis Savva
ad500b01e0
Fixes TMC compilation error
2018-01-15 12:43:22 +02:00
Scott Lahteine
6a043eee55
Various updates for TMC support
2018-01-10 23:04:48 -06:00
Thomas Moore
f7efac57b7
Multi-host support
2018-01-10 00:14:47 -06:00
teemuatlut
9d923c6c03
Fix TMC gcode commands
2018-01-08 18:45:05 +02:00
Scott Lahteine
60d07f20e7
Make mbl.has_mesh() a method
2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89
Move MBL functions into the class
2018-01-07 00:13:36 -06:00
Scott Lahteine
e89f1453ab
UBL G29 works without settings.load()
2018-01-05 15:48:34 -06:00
Scott Lahteine
7541316bb4
Add M701/M702 Filament Load/Unload, M603
2018-01-04 15:07:37 -06:00
studiodyne
31582caa07
2.0 Fix for bad Pause extruder position resuming ( #9029 )
2018-01-03 23:18:27 -06:00
Thomas Moore
8afc4f8d9d
Fix UBL compilation warnings
2018-01-02 21:00:06 -06:00
Scott Lahteine
9686ffedef
Single pause flag also indicates SD print pause
2017-12-30 04:44:59 -06:00
Scott Lahteine
b259bb4670
Fix tmc_util global vars
2017-12-25 09:05:31 -06:00
Scott Lahteine
4ef965cc40
Fix compiler warnings
2017-12-25 08:53:01 -06:00
Scott Lahteine
4b49ea1e92
General cleanup of config-store, reset_bed_level
2017-12-25 05:16:01 -06:00
Scott Lahteine
f704f405af
Add pause/resume actions on M600, M125
2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
705ea98fd3
Comment return false
in motion functions
2017-12-24 22:57:15 -06:00
Scott Lahteine
caa5093498
General DELTA_IK macro
2017-12-21 22:41:57 -06:00
Scott Lahteine
913d9e9a59
Matching sign across filwidth vars
2017-12-20 00:17:19 -06:00
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
Scott Lahteine
d568e586b7
Fix up ubl_motion indentation
2017-12-11 03:08:45 -06:00
Scott Lahteine
6d0678d963
Omit unused UBL motion code
2017-12-11 03:08:18 -06:00
Scott Lahteine
3255712343
Skew Correction for UBL
...
Also remove unused grid slicing function when using UBL segmented.
2017-12-11 03:08:15 -06:00
Scott Lahteine
3d796d8040
Move debug code
2017-12-11 00:27:06 -06:00
Scott Lahteine
3db5303bfe
_buffer_line => buffer_segment
2017-12-11 00:27:06 -06:00
Scott Lahteine
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
2017-12-11 00:27:06 -06:00