Roxy-3D
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
2018-02-15 11:15:15 -06:00
Bob-the-Kuhn
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x
...
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
2018-02-14 22:43:17 -06:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201
Fix #9361
2018-02-14 07:48:20 -06:00
AnHardt
133b38b93b
Complete M48 description ( #9631 )
2018-02-14 05:17:58 -06:00
Scott Lahteine
93c0198b2d
Init LCD welcome message programmatically
2018-02-14 05:09:44 -06:00
Scott Lahteine
67a4cc610b
French update
...
Based on #9610
2018-02-14 04:15:47 -06:00
Scott Lahteine
e7b50c89b0
Fix #9201
...
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
2018-02-14 03:29:47 -06:00
Scott Lahteine
8d71ad37cb
flush comment to match 1.1.x
2018-02-14 02:56:18 -06:00
Scott Lahteine
272f132b82
Remove stray ` from STM32F1 HAL
...
As noted in #8585
2018-02-14 01:06:37 -06:00
Scott Lahteine
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:54:12 -06:00
Scott Lahteine
2ec65051fd
Fix serial comment sp.
2018-02-13 22:40:56 -06:00
Bob-the-Kuhn
9a423e9a89
tested
2018-02-13 21:59:18 -06:00
Scott Lahteine
d741bcf8a9
Tweak boards spacing
2018-02-13 03:49:28 -06:00
Scott Lahteine
f8912bb19f
French update
...
Based on #9590 by @studiodyne
2018-02-12 01:07:47 -06:00
Scott Lahteine
e6b8207b03
Restore welcome message
2018-02-12 01:02:30 -06:00
Scott Lahteine
89165326b4
Cleanup after vim and vigor
2018-02-11 06:07:30 -06:00
Scott Lahteine
423bf9955e
Set Megatronics baud rate to 115200
...
Fix #9092
2018-02-11 03:43:36 -06:00
Scott Lahteine
377108619b
Fix plan_arc clockwise (G2)
...
Fix #9482
2018-02-11 03:34:25 -06:00
Scott Lahteine
378867d894
Update PB Rev.F pins
2018-02-11 01:45:37 -06:00
Scott Lahteine
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP ( #9586 )
2018-02-11 01:41:40 -06:00
Scott Lahteine
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
2018-02-10 20:42:00 -06:00
Scott Lahteine
7a4029d1b1
Correct MOTHERBOARD for Geeetech i3 Pro X
2018-02-10 20:29:29 -06:00
Scott Lahteine
451fb16f9b
Fix CYCLES_PER_MICROSECOND conflict
2018-02-10 20:08:48 -06:00
Scott Lahteine
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN ( #9580 )
...
Fixes #8794
2018-02-10 20:04:09 -06:00
Scott Lahteine
33752de12d
Update some outdated configs
2018-02-10 19:48:16 -06:00
Scott Lahteine
38c7d53bf7
Repair some spacing
2018-02-10 19:33:26 -06:00
Scott Lahteine
e3043d7ac7
Fix #8744
2018-02-10 16:54:42 -06:00
Scott Lahteine
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests
...
[2.0.x] Fix Power class
2018-02-10 16:43:55 -06:00
Scott Lahteine
7280fa1e31
Patch Power class
2018-02-10 15:41:18 -06:00
Scott Lahteine
4aff6c1c32
Tronxy X5S pins and configuration
2018-02-10 15:07:04 -06:00
Scott Lahteine
05aa75cecf
Melzi boards use melzi pins
2018-02-10 14:44:14 -06:00
gege2b
5785bbb491
Updated french translation ( #9556 )
2018-02-10 14:15:41 -06:00
GMagician
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
2018-02-10 14:14:34 -06:00
teemuatlut
5990266724
Init CS pins before loading settings ( #9566 )
2018-02-10 14:08:53 -06:00
teemuatlut
d3fdb44ad8
Update TMC section with SW SPI pins ( #9554 )
2018-02-09 22:54:34 -06:00
Scott Lahteine
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting
...
[2.0.x] Prevent watchdog reset due to many comments
2018-02-09 07:13:26 -06:00
Scott Lahteine
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off
...
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
2018-02-09 07:12:29 -06:00
Scott Lahteine
c0dd9ef9f2
Support for AnyCubic TriGorilla board ( #9551 )
2018-02-09 05:41:52 -06:00
Scott Lahteine
da693a636e
Fix handling of escapes in serial input
2018-02-09 05:19:33 -06:00
Scott Lahteine
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
2018-02-09 05:19:33 -06:00
Scott Lahteine
112917cfef
No EXTRUDER_RUNOUT_PREVENT during print
2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab
Prevent watchdog reset due to many comments
...
Addressing #7449
2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe
Minor comment/condition cleanup
2018-02-09 01:53:35 -06:00
Scott Lahteine
f64d300cfd
Sanity check SERIAL_PORT
...
Addressing #7400
2018-02-09 00:44:15 -06:00
Scott Lahteine
5a70887467
Size lcd_status_message based on language ( #9545 )
2018-02-08 23:03:47 -06:00
Scott Lahteine
545cd8fa60
Tweak malyanlcd.cpp
2018-02-08 22:00:23 -06:00
Scott Lahteine
e698998343
More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
2018-02-08 21:10:11 -06:00
shaktee
27faeafc1b
[2.0.x] BIBO Cyclops ( #9541 )
2018-02-08 21:01:31 -06:00
Scott Lahteine
2014d38e10
NEOPIXEL_BRIGHTNESS parity
2018-02-08 18:55:19 -06:00
