3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-13 14:01:52 +00:00
Code Issues Releases Wiki Activity
13,736 Commits 21 Branches 81 Tags 2 GiB
ceeba58dc9
Commit Graph

188 Commits

Author SHA1 Message Date
Eric Ptak
59e97e5e52 FYSETC Cheetah 1.2 (#14723) 2019-07-27 21:21:54 -05:00
thisiskeithb
d74efd9d46 MKS Robin Lite/Lite2 Board Support (#14729) 2019-07-27 04:43:37 -05:00
Msq001
6920b7fe91 BigTreeTech SKR E3 DIP (#14638) 2019-07-18 05:43:49 -05:00
Tanguy Pruvot
45bde333d5 Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support (#14597) 2019-07-14 18:05:24 -05:00
Jeonghwan Noh
475ccfad62 Oscar (by Thinknthings of Korea) board support (#14574) 2019-07-14 15:36:03 -05:00
Scott Lahteine
948c3f580b Clean up some LCD conditions 2019-07-11 06:11:19 -05:00
thisiskeithb
42be684e69 Wanhao Duplicator i3 Mini support (#14559) 2019-07-11 04:36:51 -05:00
Scott Lahteine
340d827dc1 Fix mega/ subfolder pins 
Followup to #14573
 2019-07-11 02:59:02 -05:00
Scott Lahteine
7de605c5c3
Move pins files to subfolders #14573 2019-07-11 02:32:24 -05:00
Ludy
a7bb1fc322 Fix Dual X,Y,Z UART pins in relation to TMC2208/9 (#14554) 2019-07-09 22:52:48 -05:00
gmarsh
ab99a80793 GMARSH X6 board support (#14550) 2019-07-09 00:30:08 -05:00
Msq001
439e28783b BigTree SKR Pro V1.1 board support (#14523) 2019-07-06 21:52:17 -05:00
thisiskeithb
10a71e332d Biqu SKR 1.1 => BigTree SKR 1.1 (#14514) 2019-07-05 20:57:08 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine
0f79fb9821 Generic stop pins (presume one endstop per axis end) 2019-07-02 20:30:26 -05:00
thisiskeithb
c6f74ba887 TH3D EZBoard v1.0 (#14473) 2019-07-02 03:12:32 -05:00
Msq001
c9be936d4a BigTreeTech SKR Mini E3 (#14457) 2019-07-01 07:06:25 -05:00
Scott Lahteine
4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
7e16835c83
Use LCD conditionals in pins files (#14428) 2019-06-27 22:14:43 -05:00
thisiskeithb
8b63e3701f MKS Robin Nano board support (#14363) 2019-06-27 21:33:41 -05:00
thisiskeithb
cd302f9464 Add MKS SGen-L Board (#14411) 2019-06-26 04:17:06 -05:00
Eric Ptak
8934b32f1b Fysetc AIO II / Cheetah STM32F1 (#14407) 2019-06-26 00:40:29 -05:00
thisiskeithb
a4aa3621c0 MKS Robin Mini Board Support (#14366) 2019-06-24 03:42:22 -05:00
thisiskeithb
71b2700c3c Anycubic Trigorilla 1.4 Rev. 1.1 (#14357) 2019-06-22 17:53:45 -05:00
pinchies
3021097888 Add JGAurora A5S and A1 (STM32F103ZET6) (#14291) 
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
 2019-06-15 14:28:22 -05:00
Aliaksei Kvitsinski
648a91bce8 Support for Z-Bold board (#14024) 2019-06-13 03:21:18 -05:00
yangwenxiong
b0a4ea79b8 BigTreeTech SKR Mini v1.1 (#14041) 2019-06-10 21:10:51 -05:00
Scott Lahteine
fa3b5fb059 Uppercase pins filename 2019-06-05 21:41:58 -05:00
InsanityAutomation
bbcb61e042 Initial Commit - Add board 2019-06-03 23:49:19 -04:00
Scott Lahteine
81cee05476 Update some env in pins.h 2019-05-25 23:17:50 -05:00
Laurent
df75a606ff Support MKS SGen board (#13694) 2019-04-15 17:03:10 -05:00
InsanityAutomation
ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Alexander Gavrilenko
3c47e1b4d1 Support Black STM32F407VET6 with RAMPS-like shield (#13524) 2019-04-05 15:30:19 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Anthony Rich
7640b328df Support for Tronxy X5S 2e (#13297) 2019-03-03 07:41:05 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Msq001
f8a39919fa Add Bigtree SKR 1.3 board (#13267) 
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
 2019-02-26 21:30:00 -06:00
Bob Kuhn
ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine
15aa932aa6
HAL for Linux (#13146) 2019-02-22 19:09:10 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Psycho
3c88cac2e9 Velleman Vertex Delta pins (#13072) 2019-02-04 00:15:08 -06:00
Scott Lahteine
159d7eefda New boards entry for the A20M 2019-01-28 21:08:20 -06:00
lanserge
c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 2019-01-19 23:43:32 -06:00
chrisly42
99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 2019-01-19 20:19:14 -06:00
Bob Kuhn
d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 2019-01-15 18:59:36 -06:00
Chris Barr
1d33784bf9 Add RUMBA32 Board (#12856) 2019-01-10 19:34:31 -06:00
Ludy
74c47803f7 Add VORON printer (#12705) 2019-01-03 06:27:03 -06:00
Scott Lahteine
371d9a1acf Fix line-endings, formatting, whitespace 
Followup to #12770
 2018-12-30 15:38:20 -06:00
Alain Martel
44ed34475b Add MKS BASE 1.4 pins (#12770) 2018-12-30 10:40:22 -06:00
Msq001
f8c5d31864 Bugfix 2.0.x add motherboard pins define (#12689) 
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
 2018-12-27 10:52:35 -06:00
Ludy
f7127c44f8 Wanhao Duplicator i3 Plus pins create (#12701) 2018-12-20 17:30:36 -06:00
jmz52
33abb86b7e Add support for MKS Robin board (#12650) 
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
 2018-12-20 17:23:27 -06:00
Ludy
97de9d54a5 Fix broken pins file include (#12617) 2018-12-09 19:06:03 -06:00
InsanityAutomation
dec721c52b Add Formbot Raptor2 and Raise3D pins (#12532) 
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
 2018-11-25 19:56:06 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Ryan
052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
InsanityAutomation
ad60f0691c Add Creality3D RAMPS pins definitions (#12229) 2018-10-26 16:09:04 -05:00
Karl Andersson
4eb798dbdc Add support for Arm'ed (STM32F4) board (#12147) 2018-10-19 14:50:52 -05:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Scott Lahteine
0fcdfdeed6 Followup to #12017 2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8 Add support for MeCreator2 (#12017) 2018-10-06 12:26:49 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Mitch Roote
d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
InsanityAutomation
cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation
1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Scott Lahteine
8584d3697d Fix servo count define conflict 
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
 2018-09-11 16:20:31 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3 2018-09-06 09:41:59 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Ilya Bukhonin
7ecb8b4af5 [2.0.x] Teensy 3.1 and 3.2 support (#11460) 2018-08-27 21:49:49 -05:00
Pablo Crespo
409a0632af [2.0.x] Add Morpheus Board support (#11651) 2018-08-27 21:28:03 -05:00
Chris Pepper
b71c2b8651 [2.0.x] Update LPC176x tests, fix clean script (#11617) 2018-08-24 18:53:24 -05:00
Michael Triffon
f8c52c9c29 Azteeg X5 Mini WiFi support (#11601) 2018-08-21 23:58:26 -05:00
Roxy-3D
62ce937540
Update pins.h to include the Formbot board 2018-08-20 16:44:54 -05:00
Greg Nutt
a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine
9bae413901
Add Bigtreetech/BIQU KFB 2.0 board (#11446) 2018-08-03 18:14:26 -05:00
Dave Johnson
8a24ff94d1 AT90USB1286 PIO cleanup and optimization (#11230) 
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
 2018-07-26 05:58:28 -05:00
Lee Olivares
094e6d81a5 Add Einstart-S support (#11219) 
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
 2018-07-26 05:52:22 -05:00
Bo Herrmannsen
67b205fd45 Add support for board RuRAMPS4D v1.3 (#11363) 2018-07-25 19:32:27 -05:00
Simon Jouet
e2aeda61ed HAL for Espressif ESP32 Wifi 2018-06-13 19:33:35 -05:00
Scott Lahteine
88314b8910 CREALITY_ENDER is long gone 
As noted in #10965
 2018-06-08 19:53:21 -05:00
Axel
ae322e0c54 [2.0.x] Add GTM32 Pro VB support (#10898) 2018-05-31 00:11:38 -05:00
Scott Lahteine
d259070980 Clean up trailing spaces from vim, etc. 2018-05-31 00:09:41 -05:00
Axel
bbd09a99f1 32 bit boards classification cleanup (#10818) 
- Ordering and match classification between `boards.h` and `pins.h`
- Check `pins.h` environments
 2018-05-22 21:20:24 -05:00
Bob Kuhn
62e2987488 add AT90USB support & add items to popup menu (#10779) 2018-05-19 17:39:26 -05:00
Bob-the-Kuhn
00dfaae8df [2.0.x] Platformio - automate build & environment selection (#10503) 2018-04-26 02:42:06 -05:00
Scott Lahteine
2be5fe5ddf Split TRIGORILLA into 1.3 and 1.4 2018-04-20 16:12:25 -05:00
Scott Lahteine
80e29492c6 TRIGORILLA => TRIGORILLA_13 2018-04-20 16:12:25 -05:00
Scott Lahteine
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454) 
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
 2018-04-18 22:58:43 -05:00
Karl Andersson
428c54f2ad [2.0.x] HAL for STM32F4 (#10434) 2018-04-17 17:33:29 -05:00
Chris Pepper
cc6d41e1d3 Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:06 -05:00
Marcio Teixeira
9356cf648f Added support for Einsy Retro 
http://reprap.org/wiki/EinsyRetro
 2018-04-06 19:48:46 -05:00
Scott Lahteine
4a23069de9 Fix Ender 4 / CR-8 compilation 
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
 2018-04-01 18:22:06 -05:00
Scott Lahteine
374ea49be9 Revert marlinAnalogInputToDigitalPin 2018-03-14 00:18:40 -05:00