Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Robby Candra
81c2c3ec11
Continuous filename scrolling ( #13609 )
2019-04-07 16:58:32 -05:00
Scott Lahteine
58bca67883
Unify status scrolling further
2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e
finishstatus => finish_status
2019-03-17 07:56:35 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
7eggert
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
2019-03-11 18:10:56 -05:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Jiri
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
2019-01-24 16:34:40 -06:00
lanserge
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
2019-01-19 23:43:32 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
Scott Lahteine
e6484d9dab
Return to status when SD card is removed
2019-01-10 15:43:31 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
Marcio Teixeira
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
2018-12-12 17:21:37 -06:00
Scott Lahteine
2224a4d61a
Remove AVR-only MARLIN_DEV_MODE code
2018-11-30 17:54:24 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
2018-11-28 19:28:31 -06:00
Scott Lahteine
4f9ec9ab45
Add heating progress bars ( #12543 )
2018-11-27 21:15:52 -06:00
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior ( #12508 )
2018-11-22 06:00:00 -06:00
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button ( #12493 )
2018-11-20 21:39:30 -06:00
Scott Lahteine
4def8b3b5e
Expanded options for _Statusscreen.h ( #12455 )
...
See the PR for full details. The updated system will be documented on the website in the near future.
2018-11-20 07:50:37 -06:00
Scott Lahteine
817a37169a
Apply/unapply const here and there
2018-11-20 06:44:21 -06:00
Marcio Teixeira
50ee747787
Fix compilation errors. Followup to #12439 ( #12481 )
2018-11-20 00:02:13 -06:00
Ludy
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
2018-11-18 20:39:49 -06:00
Scott Lahteine
7f225b9421
Fix MAX_MESSAGE_LENGTH
2018-11-18 01:11:26 -06:00
Scott Lahteine
06674a321a
Remove extra include
2018-11-18 00:34:07 -06:00
Marcio Teixeira
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
2018-11-17 22:21:44 -06:00
Ludy
93e958f695
Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS ( #12466 )
2018-11-17 21:21:30 -06:00
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code ( #12450 )
2018-11-16 21:44:48 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
2018-11-16 20:47:07 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering ( #12430 )
...
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
2018-11-14 13:13:51 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method ( #12429 )
2018-11-14 06:00:21 -06:00
Scott Lahteine
54ec5528a0
hasstatus => has_status
2018-11-14 01:34:28 -06:00
Marcio Teixeira
3ceab8474c
Add required "cardreader.h" include ( #12419 )
2018-11-13 17:12:44 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI ( #12414 )
...
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
2018-11-13 01:47:45 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
2018-11-10 18:07:38 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
2018-11-09 00:07:16 -06:00
Scott Lahteine
488a17b3f5
Use IS_SD_PRINTING() more
2018-11-06 20:55:17 -06:00
Scott Lahteine
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
2018-11-05 04:17:37 -06:00
Scott Lahteine
8014e1cc9d
Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)
2018-11-04 18:30:10 -06:00
Ludy
5ba6607181
Fix keypad-related compile error ( #12306 )
2018-11-02 22:29:32 -05:00
Ludy
9f77df2590
Followup to menu refactor. TMC warnings, sanity. ( #12288 )
...
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
2018-11-01 16:13:33 -05:00
Scott Lahteine
eb5600acd2
Add parentheses to LCD_CLICKED
2018-11-01 15:06:14 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor ( #12275 )
2018-10-30 16:34:45 -05:00
Scott Lahteine
b063b1b722
Reorganize includes and declarations
2018-10-28 15:46:45 -05:00
Scott Lahteine
a489c9fa52
Move Motion Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
c825c419d4
Convert DOGM / HD44780 impl to CPP files
2018-10-28 15:46:45 -05:00
Scott Lahteine
2bf18950ab
Refactor LCD menus
2018-10-28 15:46:45 -05:00
Scott Lahteine
3c9daf322a
MSG_CNG_SDCARD => MSG_CHANGE_SDCARD
2018-10-27 13:56:29 -05:00
Scott Lahteine
bf9dd4f4cf
Add helpers for custom text in menu items ( #12214 )
...
For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.
2018-10-25 15:17:53 -05:00
Roman Moravčík
55dec02ca1
Allow X, Y, Z manual move when cold. ( #12209 )
2018-10-25 09:13:52 -05:00
Scott Lahteine
2f873a119f
Revert some UBL strings
2018-10-23 15:39:59 -05:00
Ludy
a93e9e6e9b
Use preheat labels in place of PLA/ABS ( #12194 )
2018-10-23 15:38:17 -05:00
Scott Lahteine
a553ab82e0
Add e index to _lcd_move_distance_menu
2018-10-22 23:35:04 -05:00
Scott Lahteine
3a46212dd8
Better cold extrusion prevention in LCD menu ( #12189 )
2018-10-22 20:54:38 -05:00
Farkas Péter
427c80119a
Hide some menu items when busy: fix typo ( #12164 )
2018-10-20 15:55:31 -05:00
TheSFReader
1fb9b299d4
Add M524 to abort SD printing ( #12155 )
2018-10-19 14:25:07 -05:00
Scott Lahteine
c6a5c74208
Add parentheses to SD macros
2018-10-19 13:52:57 -05:00
Marcio Teixeira
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
...
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
2018-10-18 21:20:56 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) ( #12132 )
...
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 11:34:52 -05:00
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Scott Lahteine
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
2018-10-16 16:46:40 -05:00
Scott Lahteine
50cbca4c55
Hide some menu items when busy
2018-10-10 17:18:33 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage ( #12054 )
...
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
2018-10-10 09:45:20 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability ( #12043 )
...
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
2018-10-09 20:00:47 -05:00
Marcio Teixeira
d6d48e63fb
Allow #defined TYPE arg to ultralcd menu macros ( #12041 )
...
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
2018-10-08 20:01:00 -05:00
InsanityAutomation
74cd6cb4fc
Single nozzle filament change ( #11994 )
2018-10-07 17:06:14 -05:00
Giuliano Zaro
c0d9058e25
Shorten an Italian menu title ( #12034 )
...
…and change a multi-use "back" menu item.
2018-10-07 16:43:48 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds ( #12032 )
2018-10-07 15:34:41 -05:00
Scott Lahteine
3019713402
Reorganize some enums
2018-10-01 05:32:55 -05:00
dot-bob
b0fd8f2d74
Add option to move Z on double-click when idle
2018-10-01 01:41:11 -05:00
InsanityAutomation
8ae113ff36
Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled ( #11973 )
2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392
Clean up main menu ( #11972 )
2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916
Home before level corners, if needed ( #11976 )
...
…and add a consistent homing screen for all LCD pre-homing.
2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7
Add filament runout sensor menu item ( #11971 )
2018-09-30 21:33:46 -05:00
AnoNymous
b30ca652ae
Replace MIN# / MAX# with variadic MIN / MAX ( #11960 )
2018-09-30 04:59:14 -05:00
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
2018-09-28 16:52:56 -05:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine
a2b0260f0f
Update Sublime files
2018-09-23 19:59:08 -04:00
Scott Lahteine
c5e5cc5e9f
Fix some trailing whitespace, macros
2018-09-17 17:30:04 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development
...
Take it out of the menu until it is tested and working.
2018-09-17 10:26:44 -05:00
Roxy-3D
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Hannes Brandstätter-Müller
84ed9b5a63
Send "G33 S P1" for Delta Height Calibration ( #11831 )
2018-09-15 20:17:35 -05:00
Sam Lane
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
Marcio Teixeira
2ebfe90be9
Add custom preheat temp to filament change ( #11475 )
2018-09-10 02:51:46 -05:00
Scott Lahteine
72af8e0f02
Patch extruder_advance_K edit menu
...
Fix #11776
2018-09-09 03:21:08 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
2018-09-08 20:41:21 -05:00
Marcio Teixeira
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
2018-09-06 02:00:25 -05:00
Scott Lahteine
8b837dc3ad
No need for last \n in G-code items
2018-09-03 23:23:20 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
Roxy-3D
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
Marcio Teixeira
0966bdcbc4
Reorganized ultralcd menu (10317) ( #10360 )
...
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
2018-08-29 16:51:14 -05:00
Scott Lahteine
acf5ae3083
!ENABLED => DISABLED
2018-08-24 16:36:37 -05:00
InsanityAutomation
c2553f9888
2.0.x - Idex match119 ( #11556 )
...
* Update ubl_G29.cpp
* Update ultralcd.cpp
2018-08-15 13:26:11 -05:00
Scott Lahteine
f891416e70
No raise on G28 after power-loss
2018-08-07 13:51:36 -05:00
MikeLud
aadcf08913
[2.0.x] add Calibrate Z (M915) to Prepare Menu ( #11331 )
2018-07-26 05:09:49 -05:00
Scott Lahteine
065e9c3d66
Add card.longest_filename method
2018-07-17 18:18:52 -05:00
Roxy-3D
603e136e87
Resolve issue where user can't edit UBL's mesh
2018-07-08 14:41:38 -05:00
etagle
1367df2875
Replace double with float, optimize calculation
2018-07-04 22:28:56 -05:00
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
2018-07-02 23:21:28 -05:00
Scott Lahteine
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
2018-06-29 22:41:02 -05:00
Scott Lahteine
3349eb0020
Fix SKEW_CORRECTION compile error
2018-06-29 19:38:18 -05:00
Andy Shaw
3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
2018-06-26 22:38:31 -04:00
Scott Lahteine
383129728a
Edit Z fade as whole numbers
2018-06-21 11:52:29 -04:00
Scott Lahteine
1239e8eda2
Fix value editing with callback
2018-06-21 11:52:03 -04:00
Scott Lahteine
9d04f47d98
Improvements for junction_deviation_mm
...
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
2018-06-11 22:05:16 -05:00
Scott Lahteine
f2c3b0d476
Use bit flags for homed/known
2018-06-11 22:05:16 -05:00
Scott Lahteine
ae07a3e4aa
Multiplier edit large ranges
2018-06-10 18:22:12 -05:00
Scott Lahteine
20a5db03bb
Junction Deviation limit (0.01 to 0.3)
2018-06-10 18:22:08 -05:00
Scott Lahteine
a2f521d34b
Add Junction Deviation mm runtime setting ( #10990 )
2018-06-10 18:02:54 -05:00
Scott Lahteine
2fd9ba56da
LED menu item bool (like Case Lights)
2018-06-03 00:34:29 -05:00
Scott Lahteine
cf7d5a642a
Fix manual moves for switching tools ( #10868 )
2018-05-26 18:30:53 -05:00
Eduardo José Tagle
6f330f397e
[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup ( #10844 )
2018-05-25 23:32:37 -05:00
Scott Lahteine
c89649b46e
Suppress U8glib build warnings
2018-05-23 02:47:36 -05:00
Scott Lahteine
ee333f6be2
Followup to endstops tweaks
2018-05-22 20:41:03 -05:00
Scott Lahteine
68d7fcec83
Simplify and fix Z fade height edit
...
Fix #10761
2018-05-20 12:29:23 -05:00
etagle
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
2018-05-20 06:23:58 -05:00
GMagician
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
2018-05-19 17:05:15 -05:00
Scott Lahteine
c173a31060
Fix some compile warnings
2018-05-19 16:54:48 -05:00
Scott Lahteine
0ea60d506a
Clear up LCD-related compile issues
2018-05-15 00:06:59 -05:00
Scott Lahteine
f07260c33f
Don't babystep on long click unless printing
...
As pointed out in #10731
2018-05-13 08:11:35 -05:00
Scott Lahteine
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-13 04:52:56 -05:00
Scott Lahteine
083ec9963e
Tweaks to heater / lcd conditions
2018-05-13 04:52:56 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert ( #10693 )
...
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
2018-05-11 01:01:51 -05:00
Scott Lahteine
a1fab8336e
Fix abort of SD printing
2018-05-07 02:52:26 -05:00
Scott Lahteine
81b632c255
Additional temp-oriented improvements
2018-05-02 08:43:22 -05:00
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 07:13:56 -05:00
Scott Lahteine
a90d99c27c
Rename float32 => float52, etc.
2018-05-01 07:08:47 -05:00
Scott Lahteine
05fca752d6
Clean up autostart handling
2018-05-01 01:35:57 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
524cc392f4
Fix sd_status comparison
...
Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>
2018-04-30 21:09:50 -05:00
Scott Lahteine
9e0d99c0c6
Round all floats in string conversion functions ( #10566 )
2018-04-29 00:51:36 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
2018-04-23 17:13:01 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
2018-04-22 02:50:48 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
...
[2.0.x] Creality3D Power-Loss Recovery
2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks ( #10470 )
...
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
2018-04-22 00:16:30 -05:00
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
2018-04-21 21:56:50 -05:00
Scott Lahteine
78ea4871f9
Fix up enqueue now functions
...
…and apply to MALYAN_LCD.
2018-04-19 19:45:53 -05:00
Scott Lahteine
df2f24617b
Use 0 as the bed position (not Z_MIN_POS)
2018-04-17 20:32:56 -05:00
Scott Lahteine
e4acd2c40e
One fewer compare in _lcd_move_xyz
2018-04-17 16:03:15 -05:00
Scott Lahteine
6c7a17dba6
Abort SD printing more safely ( #10407 )
...
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
2018-04-15 18:27:54 -05:00
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
2018-04-13 00:24:09 -05:00
Scott Lahteine
0535ebc4d2
MESH_BED_LEVELING before PROBE_MANUALLY
2018-04-12 22:45:52 -05:00
Luc Van Daele
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT ( #10386 )
2018-04-12 20:22:29 -05:00