Scott Lahteine
ece14af556
Improve LCD leveling value edits
2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c
Add HAS_MESH conditional
2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc
General cleanup, apply const
2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0
Move leveling_is_active to a macro
2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f
Remove obsolete UBL z_offset
2017-10-13 08:23:01 -05:00
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1
Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance
...
[1.1.x] Remove legacy ADVANCE feature
2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d
Segmented manual moves for kinematics
2017-10-09 23:10:17 -05:00
deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
...
Based on #7447 by @Bob-the-Kuhn
2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6
Apply some tweaks based on 2.0.x
2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1
Bring configs into parity with 2.0.x
2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa
Remove legacy ADVANCE feature
2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713
LCD filename already concatentated
2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2
LCD filename already concatenated
2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7878 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800
Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix
...
Addressing #7612
2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62
Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses
...
[1.1.x] Fixing ANET encoder pulses
2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553
Fixing #7833
2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01
Patch SD file draw bug
2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7
Fixes for G33
2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354
Tweak spacing in utf8_mapper.h
2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d
Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk
...
[1.1.x] Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
...
Addressing #7745
2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4
Updated all examples configurations
...
Forgot to update examples configurations. Done now
2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686
Remove some excess whitepsace
2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724
Show leveling status on character LCD
2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7
Add confirmation to Init EEPROM command
2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d
Add USER_SCRIPT_RETURN option
2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
...
Based on #7769
2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd
Fixed ST7920_DELAY typo
...
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
...
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
...
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
