daid303
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
2013-01-10 11:08:45 +01:00
Kevin O'Connor
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
...
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
2013-01-08 18:50:15 -05:00
Kevin O'Connor
3f2f94ef28
Be consistent in setting of the fan PWM.
...
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
2013-01-08 18:49:18 -05:00
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
2012-12-16 01:36:57 +01:00
daid303
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
2012-12-03 12:52:00 +01:00
daid303
94ea26ff46
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
2012-12-03 12:13:20 +01:00
Erik vd Zalm
b98fb17fe9
Small FREQUENCY_LIMIT changes
2012-11-21 20:17:44 +01:00
daid303
8f20562f49
Fix some of the crowded code style. And fixed the conditional. #300
2012-11-12 15:49:40 +01:00
daid303
72586eb30a
Solved few warnings.
2012-11-12 09:29:12 +01:00
daid303
06b58a9c4f
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
2012-11-06 12:06:41 +01:00
stohn
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
2012-08-21 14:48:29 +02:00
Erik van der Zalm
b67dacdc8f
Fixed AD595 define
2012-06-11 17:33:42 +02:00
Daid
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2012-05-19 17:38:46 +02:00
Erik van der Zalm
ba96059203
add additional dropsegments test
2012-05-16 19:21:44 +02:00
zittix
fbd91ab0b5
Fixes #153 for bad call to abs()
2012-05-16 18:17:34 +02:00
Erik de Bruijn
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
2012-05-08 17:44:08 +02:00
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
2012-04-15 19:17:33 +02:00
Erik van der Zalm
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
...
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
2012-04-01 16:23:40 +02:00
Erik van der Zalm
61e09e6be2
Added FAN_PIN -1 checks
2012-03-08 22:09:49 +01:00
Erik van der Zalm
116dc86b8a
Fixed type in e-jerk
2012-03-04 23:09:13 +01:00
Erik van der Zalm
e056bf8081
Added E-Jerk
2012-03-04 16:34:58 +01:00
Erik van der Zalm
aac7aa3bf0
Queued fan control. Issue #90
2012-03-04 13:05:26 +01:00
Erik van der Zalm
cb0c84e075
Merge remote-tracking branch 'justblair/master' into Marlin_v1
2012-03-03 20:20:55 +01:00
Blair Thompson
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
2012-03-03 15:51:47 +00:00
Daid
88d289caa1
Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.
2012-02-29 11:38:12 +01:00
Erik van der Zalm
b48d67ce10
Fixed homing
2012-02-27 18:31:40 +01:00
Erik van der Zalm
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
2012-02-26 16:23:47 +01:00
Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
2012-02-24 23:34:41 +01:00
Erik van der Zalm
5aa9c41ab1
Changed comment mode for detection.
...
Added M221 extuder multiply factor.
2012-02-24 20:42:07 +01:00
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
2012-02-22 18:07:56 +01:00
Erik van der Zalm
a0a1f81913
various changes
2012-02-21 20:17:28 +01:00
Erik van der Zalm
b58eae7657
Corrected e-length calculation in planner
2012-02-11 18:36:42 +01:00
Erik van der Zalm
6ef8459494
Corrected distance calculation. (thanks jv4779)
2012-02-09 19:53:06 +01:00
Erik van der Zalm
abb7e63906
fixed z-disable bug.
2012-02-05 21:14:55 +01:00
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
2012-02-05 12:42:15 +01:00
Bernhard
3c1a4aac2b
header file simplification
2011-12-22 12:38:50 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
2011-12-09 15:09:52 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
2011-12-04 19:54:43 +01:00
Erik van der Zalm
af22e9cd38
Some advance modifications
2011-12-04 19:54:07 +01:00
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
2011-12-04 09:48:53 +01:00
Erik van der Zalm
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
2011-12-02 17:45:05 +01:00
Bernhard
311627141b
Merge branch 'smallopt' into Marlin_v1
...
Conflicts:
Marlin/temperature.h
2011-11-28 21:36:01 +01:00
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
2011-11-27 21:12:55 +01:00
Bernhard
26a1de1e44
force inline
2011-11-27 16:04:58 +01:00
Bernhard
f8e170a44b
planner optimization by inline functions
2011-11-27 14:57:12 +01:00
Erik van der Zalm
aad4b75b94
First parts 2nd extruder
2011-11-26 17:33:25 +01:00
