Christian Thalhammer
fde51084f3
set SD file delete to M30; switch printime output to M31
2012-03-03 21:58:12 +01:00
Christian Thalhammer
5f3a422e68
added M31 - delete file from sd card
2012-03-02 21:49:05 +01:00
Christian Thalhammer
fa2e3a40e9
fixed LCD manual z axis move Feedrate to 70 (was 1700)
2012-03-01 14:38:50 +01:00
Christian Thalhammer
a92b3afe64
added german translation;Menue should be in english.. sounds better
2012-03-01 14:24:20 +01:00
Christian Thalhammer
9fa586bbed
fixed languages; Preheat_PLA and Preheat_ABS was not defined for non
...
english
2012-03-01 14:05:40 +01:00
Christian Thalhammer
cb02914687
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2012-02-29 14:51:35 +01:00
Christian Thalhammer
10bf2bb8e1
-
2012-02-29 14:51:15 +01:00
Erik van der Zalm
b4833d55c2
Fixed HOME_POS in combination with G28 X0 or G28 Y0
2012-02-28 18:20:03 +01:00
Erik van der Zalm
c6f2ec3c82
remove stop_heating_wait
2012-02-27 18:45:45 +01:00
Erik van der Zalm
b48d67ce10
Fixed homing
2012-02-27 18:31:40 +01:00
ErikZalm
071eec7aa7
Merge pull request #81 from phord/09469add5560ca8a676c42e4bcd499868c33f0dd
...
Clean up and add some trace info
2012-02-27 08:38:36 -08:00
ErikZalm
1ebe7d1ab6
Merge pull request #83 from phord/tempfix
...
Add explicit #define for bogus temp override
2012-02-27 08:36:45 -08:00
ErikZalm
de37b2264a
Merge pull request #82 from phord/fix-gen7-build
...
pins.h: Define Z_MAX_PIN for Gen7 board
2012-02-27 08:36:06 -08:00
Phil Hord
b65ef8d66c
Add support for upcoming Gen7 v1.4
...
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
2012-02-26 20:39:49 -05:00
Phil Hord
740f0c7690
Add explicit #define for bogus temp override
...
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature. But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
2012-02-26 20:26:16 -05:00
Phil Hord
ba8500a236
pins.h: Define Z_MAX_PIN for Gen7 board
...
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail. Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
2012-02-26 20:18:39 -05:00
Phil Hord
09469add55
Add board reset reporting (from Repetier-Firmware)
2012-02-26 18:26:56 -05:00
Phil Hord
f3101e96d9
Add suitable .gitignore to avoid build noise
2012-02-26 18:26:56 -05:00
Phil Hord
245dca4bee
Makefile: generic pde=>cpp rule
...
This adds flexibility to the makefile by allowing different pde
targets to be specified for different needs.
2012-02-26 18:26:55 -05:00
Erik van der Zalm
97d42ca2b2
SDSUPPORT default disabled
2012-02-26 22:05:38 +01:00
ErikZalm
2faa0852b9
Merge pull request #79 from changwoo/Marlin_v1
...
Fix build on Sanguino based boards with ATmega1284P
2012-02-26 13:03:15 -08:00
Changwoo Ryu
7b14953c99
Fix build on Sanguino based boards with ATmega1284P
2012-02-27 04:12:55 +09:00
Daid
286d5003fa
Fixed compiler warning for Sanguino compile
2012-02-26 17:35:01 +01:00
ErikZalm
66d50562b6
Merge pull request #76 from iXce/Marlin_v1
...
Fix Makefile
2012-02-26 07:30:51 -08:00
Erik van der Zalm
27f595a444
Changed version => RC2
2012-02-26 16:26:40 +01:00
Erik van der Zalm
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
2012-02-26 16:23:47 +01:00
Erik van der Zalm
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
2012-02-26 16:10:59 +01:00
Erik van der Zalm
ce714fe306
Fixes in pins.h
2012-02-25 22:55:17 +01:00
Erik van der Zalm
35e57bf149
Added gen6 deluxe.
2012-02-25 17:44:45 +01:00
Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
2012-02-24 23:34:41 +01:00
Guillaume Seguin
adc108d79e
Correctly build the produced applet/Marlin.cpp source
2012-02-24 21:21:19 +01:00
Erik van der Zalm
5aa9c41ab1
Changed comment mode for detection.
...
Added M221 extuder multiply factor.
2012-02-24 20:42:07 +01:00
Erik van der Zalm
00690f7ffd
Fix cast warning in Gen7
2012-02-23 18:50:05 +01:00
Erik van der Zalm
01d28c18ab
Fixed casting warning in sanguino
2012-02-23 18:45:37 +01:00
Blair Thompson
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
2012-02-22 23:05:52 +00:00
Blair Thompson
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
2012-02-22 22:51:04 +00:00
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
2012-02-22 18:07:56 +01:00
Erik van der Zalm
df1437bd86
Changed display format for some numbers.
2012-02-21 23:05:43 +01:00
Erik van der Zalm
8816ef1c64
Small fixes after merge
2012-02-21 20:36:43 +01:00
Erik van der Zalm
d298dd121f
merged SBUBA82 and Justblair
2012-02-21 20:26:59 +01:00
Erik van der Zalm
2cc9a89830
Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1
2012-02-21 20:17:35 +01:00
Erik van der Zalm
a0a1f81913
various changes
2012-02-21 20:17:28 +01:00
Christian Thalhammer
8a8ea50f33
fixed manual axis movement lcd option
2012-02-21 09:31:28 +01:00
Blair Thompson
b976692d0f
Removed VS project files for tidyness stakes
2012-02-20 22:39:39 +00:00
Blair Thompson
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
...
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
2012-02-20 22:22:46 +00:00
Christian Thalhammer
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 °C
...
next try for manual axis movement
2012-02-20 16:07:27 +01:00
Christian Thalhammer
6a3f8cf23f
Infos about fuses to use; correct fuses in boards.txt
2012-02-20 10:25:51 +01:00
Blair Thompson
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
2012-02-18 23:56:31 +00:00
Blair Thompson
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
2012-02-18 18:25:04 +00:00
Christian Thalhammer
1ff99ae25f
ATMega1284P support for Arduino IDE
...
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
2012-02-17 11:41:47 +01:00
