/**
 * Dutch
 *
 * LCD Menu Messages
 * Please note these are limited to 17 characters!
 *
 */
#ifndef LANGUAGE_NL_H
#define LANGUAGE_NL_H

#define WELCOME_MSG                         MACHINE_NAME " gereed."
#define MSG_SD_INSERTED                     "Kaart ingestoken"
#define MSG_SD_REMOVED                      "Kaart verwijderd"
#define MSG_MAIN                            "Main"
#define MSG_AUTOSTART                       "Autostart"
#define MSG_DISABLE_STEPPERS                "Motoren uit"
#define MSG_AUTO_HOME                       "Auto home"
#define MSG_SET_HOME_OFFSETS                "Set home offsets"
#define MSG_SET_ORIGIN                      "Nulpunt instellen"
#define MSG_PREHEAT_PLA                     "PLA voorverwarmen"
#define MSG_PREHEAT_PLA0                    "PLA voorverw. 0"
#define MSG_PREHEAT_PLA1                    "PLA voorverw. 1"
#define MSG_PREHEAT_PLA2                    "PLA voorverw. 2"
#define MSG_PREHEAT_PLA012                  "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY             "PLA voorverw. Bed"
#define MSG_PREHEAT_PLA_SETTINGS            "PLA verw. conf"
#define MSG_PREHEAT_ABS                     "ABS voorverwarmen"
#define MSG_PREHEAT_ABS0                    "ABS voorverw. 0"
#define MSG_PREHEAT_ABS1                    "ABS voorverw. 1"
#define MSG_PREHEAT_ABS2                    "ABS voorverw. 2"
#define MSG_PREHEAT_ABS012                  "ABS voorverw. aan"
#define MSG_PREHEAT_ABS_BEDONLY             "ABS voorverw. Bed"
#define MSG_PREHEAT_ABS_SETTINGS            "ABS verw. conf"
#define MSG_COOLDOWN                        "Afkoelen"
#define MSG_SWITCH_PS_ON                    "Stroom aan"
#define MSG_SWITCH_PS_OFF                   "Stroom uit"
#define MSG_EXTRUDE                         "Extrude"
#define MSG_RETRACT                         "Retract"
#define MSG_MOVE_AXIS                       "As verplaatsen"
#define MSG_MOVE_X                          "Verplaats X"
#define MSG_MOVE_Y                          "Verplaats Y"
#define MSG_MOVE_Z                          "Verplaats Z"
#define MSG_MOVE_E                          "Extruder"
#define MSG_MOVE_E1                         "Extruder2"
#define MSG_MOVE_E2                         "Extruder3"
#define MSG_MOVE_01MM                       "Verplaats 0.1mm"
#define MSG_MOVE_1MM                        "Verplaats 1mm"
#define MSG_MOVE_10MM                       "Verplaats 10mm"
#define MSG_SPEED                           "Snelheid"
#define MSG_NOZZLE                          "Nozzle"
#define MSG_NOZZLE1                         "Nozzle2"
#define MSG_NOZZLE2                         "Nozzle3"
#define MSG_BED                             "Bed"
#define MSG_FAN_SPEED                       "Fan snelheid"
#define MSG_FLOW                            "Flow"
#define MSG_FLOW0                           "Flow 0"
#define MSG_FLOW1                           "Flow 1"
#define MSG_FLOW2                           "Flow 2"
#define MSG_CONTROL                         "Control"
#define MSG_MIN                             " \002 Min"
#define MSG_MAX                             " \002 Max"
#define MSG_FACTOR                          " \002 Fact"
#define MSG_AUTOTEMP                        "Autotemp"
#define MSG_ON                              "Aan "
#define MSG_OFF                             "Uit"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_ACC                             "Versn"
#define MSG_VXY_JERK                        "Vxy-jerk"
#define MSG_VZ_JERK                         "Vz-jerk"
#define MSG_VE_JERK                         "Ve-jerk"
#define MSG_VMAX                            "Vmax "
#define MSG_X                               "x"
#define MSG_Y                               "y"
#define MSG_Z                               "z"
#define MSG_E                               "e"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "VTrav min"
#define MSG_AMAX                            "Amax "
#define MSG_A_RETRACT                       "A-retract"
#define MSG_XSTEPS                          "Xsteps/mm"
#define MSG_YSTEPS                          "Ysteps/mm"
#define MSG_ZSTEPS                          "Zsteps/mm"
#define MSG_ESTEPS                          "Esteps/mm"
#define MSG_TEMPERATURE                     "Temperatuur"
#define MSG_MOTION                          "Beweging"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
#define MSG_CONTRAST                        "LCD contrast"
#define MSG_STORE_EPROM                     "Geheugen opslaan"
#define MSG_LOAD_EPROM                      "Geheugen laden"
#define MSG_RESTORE_FAILSAFE                "Noodstop reset"
#define MSG_REFRESH                         "Ververs"
#define MSG_WATCH                           "Info scherm"
#define MSG_PREPARE                         "Voorbereiden"
#define MSG_TUNE                            "Afstellen"
#define MSG_PAUSE_PRINT                     "Print pauzeren"
#define MSG_RESUME_PRINT                    "Print hervatten"
#define MSG_STOP_PRINT                      "Print stoppen"
#define MSG_CARD_MENU                       "Print van SD"
#define MSG_NO_CARD                         "Geen SD kaart"
#define MSG_DWELL                           "Slapen..."
#define MSG_USERWAIT                        "Wachten..."
#define MSG_RESUMING                        "Print hervatten"
#define MSG_PRINT_ABORTED                   "Print afgebroken"
#define MSG_NO_MOVE                         "Geen beweging."
#define MSG_KILLED                          "AFGEBROKEN. "
#define MSG_STOPPED                         "GESTOPT. "
#define MSG_CONTROL_RETRACT                 "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP            "Ruil Retract mm"
#define MSG_CONTROL_RETRACTF                "Retract  F"
#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Ruil UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  F"
#define MSG_AUTORETRACT                     "AutoRetr."
#define MSG_FILAMENTCHANGE                  "Verv. Filament"
#define MSG_INIT_SDCARD                     "Init. SD kaart"
#define MSG_CNG_SDCARD                      "Verv. SD card"
#define MSG_ZPROBE_OUT                      "Z probe uit. bed"
#define MSG_POSITION_UNKNOWN                "Home X/Y voor Z"
#define MSG_ZPROBE_ZOFFSET                  "Z Offset"
#define MSG_BABYSTEP_X                      "Babystap X"
#define MSG_BABYSTEP_Y                      "Babystap Y"
#define MSG_BABYSTEP_Z                      "Babystap Z"
#define MSG_ENDSTOP_ABORT                   "Endstop afbr."

#define MSG_RECTRACT                        "Terugtrekken"

#ifdef DELTA_CALIBRATION_MENU
    #define MSG_DELTA_CALIBRATE             "Delta Calibratie"
    #define MSG_DELTA_CALIBRATE_X           "Kalibreer X"
    #define MSG_DELTA_CALIBRATE_Y           "Kalibreer Y"
    #define MSG_DELTA_CALIBRATE_Z           "Kalibreer Z"
    #define MSG_DELTA_CALIBRATE_CENTER      "Kalibreer Midden"
#endif // DELTA_CALIBRATION_MENU

#endif // LANGUAGE_NL_H