/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Danish * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html * */ #define DISPLAY_CHARSET_ISO10646_1 namespace Language_da { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 2; PROGMEM Language_Str LANGUAGE = _UxGT("Danish"); PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" er klar"); PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Kort isat"); PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Kort fjernet"); PROGMEM Language_Str MSG_MAIN = _UxGT("Menu"); PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Slå alle steppere fra"); PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Auto Home"); // G28 PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Klik når du er klar"); PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Næste punkt"); PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Bed level er færdig!"); PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Sæt forsk. af home"); PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Forsk. er nu aktiv"); PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Sæt origin"); #if PREHEAT_COUNT PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("Forvarm ") PREHEAT_1_LABEL; PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("Forvarm ") PREHEAT_1_LABEL " ~"; PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end"); PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end ~"); PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" Alle"); PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" Bed"); PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" conf"); PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("Forvarm $"); PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("Forvarm $ ~"); PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT("Forvarm $ end"); PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT("Forvarm $ end ~"); PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT("Forvarm $ Alle"); PROGMEM Language_Str MSG_PREHEAT_M_BEDONLY = _UxGT("Forvarm $ Bed"); PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT("Forvarm $ conf"); #endif PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Afkøl"); PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Slå strøm til"); PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Slå strøm fra"); PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extruder"); PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Flyt akser"); PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Juster bed"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Juster bed"); PROGMEM Language_Str MSG_MOVE_X = _UxGT("Flyt X"); PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Flyt Y"); PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Flyt Z"); PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Flyt %smm"); PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Flyt 0.1mm"); PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Flyt 1mm"); PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Flyt 10mm"); PROGMEM Language_Str MSG_SPEED = _UxGT("Hastighed"); PROGMEM Language_Str MSG_BED_Z = _UxGT("Plade Z"); PROGMEM Language_Str MSG_NOZZLE = _UxGT("Dyse"); PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Dyse ~"); PROGMEM Language_Str MSG_BED = _UxGT("Plade"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Blæser hastighed"); PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrol"); PROGMEM Language_Str MSG_MIN = _UxGT(" \002 Min"); PROGMEM Language_Str MSG_MAX = _UxGT(" \002 Max"); PROGMEM Language_Str MSG_FACTOR = _UxGT(" \002 Fact"); PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp"); PROGMEM Language_Str MSG_LCD_ON = _UxGT("Til"); PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Fra"); PROGMEM Language_Str MSG_SELECT = _UxGT("Vælg"); PROGMEM Language_Str MSG_SELECT_E = _UxGT("Vælg *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retract"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-rejse"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatur"); PROGMEM Language_Str MSG_MOTION = _UxGT("Bevægelse"); PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament"); PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E i mm³"); PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *"); PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD kontrast"); PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Gem i EEPROM"); PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Hent fra EEPROM"); PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("Gendan Defaults"); PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Genopfrisk"); PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("Info skærm"); PROGMEM Language_Str MSG_PREPARE = _UxGT("Forbered"); PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pause printet"); PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Forsæt printet"); PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Stop printet"); PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print fra SD"); PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Intet SD kort"); PROGMEM Language_Str MSG_DWELL = _UxGT("Dvale..."); PROGMEM Language_Str MSG_USERWAIT = _UxGT("Venter på bruger..."); PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Print annulleret"); PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Ingen bevægelse."); PROGMEM Language_Str MSG_KILLED = _UxGT("DRÆBT. "); PROGMEM Language_Str MSG_STOPPED = _UxGT("STOPPET. "); PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Tilbagetræk mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Skift Re.mm"); PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Tilbagetræk V"); PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("UnRet mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Skift UnRet mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("UnRet V"); PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("AutoRetr."); PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Skift filament"); PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Skift filament *"); PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Skift SD kort"); PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Probe udenfor plade"); PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Selv-Test"); PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Home %s%s%s først"); PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Opvarmning fejlet"); PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Fejl: reserve temp"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Temp løber løbsk"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Fejl: Maks temp"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp"); PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER STOPPET"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset Venligst"); PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // Kun et bogstav PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // Kun et bogstav PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // Kun et bogstav PROGMEM Language_Str MSG_HEATING = _UxGT("Opvarmer..."); PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Opvarmer plade..."); PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibrering"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Kalibrer X"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibrer Y"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibrer Z"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibrerings Center"); PROGMEM Language_Str MSG_INFO_MENU = _UxGT("Om Printer"); PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Kort Info"); PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistors"); #if LCD_WIDTH >= 20 PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Ant. Prints"); PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Færdige"); PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total print tid"); PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Længste print"); PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Total Extruderet"); #else PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Prints"); PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Færdige"); PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total"); PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Længste"); PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extruderet"); #endif PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Strømfors."); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Driv Styrke"); PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driv %"); PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driv %"); PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driv %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driv %"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Skriv"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Forsæt print"); PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT("Forkert printer"); #if LCD_HEIGHT >= 4 PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Vent på start", "af filament", "skift")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Vent på", "filament udskyd.")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Indsæt filament", "og tryk på knap", "for at fortsætte...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Vent på", "filament indtag")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Vent på at print", "fortsætter")); #else // LCD_HEIGHT < 4 PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Vent venligst...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Udskyder...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Indsæt og klik")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Indtager...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Fortsætter...")); #endif // LCD_HEIGHT < 4 }